atmConfVcLoopbackSinkAddress

RAD-NtePrtCo-MIB · .1.3.6.1.4.1.164.12.3.2.1.4.1.4

MIB view Table view

Object

column r/w OctetString

Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used.

Context

MIB: RAD-NtePrtCo-MIB
OID: .1.3.6.1.4.1.164.12.3.2.1.4.1.4
Type: column
Access: readwrite
Status: current
Parent: atmNteConfVcEntry
Table: atmNteConfVcTable
Siblings: 17

Syntax

OctetString

Values & Constraints

Object Constraints

range: 2-20

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmConfVcPolicing Policing method desired for this VCL.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.1`
atmConfVcCCOperStatus initial (1) - The CC activation process is not started. up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Check) of local agen…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.10`
atmConfVcLoopbackTraffic This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3) - Set to '…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.11`
atmConfVcLoopbackFailureInd This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will cause Tx of a segme…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.12`
atmConfVcLoopbackFailureThreshold The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.4.1.13`
atmConfVcOamDirection The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.14`
atmConfVcName VC Name.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.12.3.2.1.4.1.15`
atmConfVcConnected This object indicates whether this VC is connected and if connected, what is it connected to. Originally, it was read-only.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.16`
atmConfVcOamDescrIndex This parameter indicates the VCL's OAM Descriptor index, according to the OAM Descriptor Configuration Table.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.4.1.17`
atmConfVcNoOfUsages This object indicates the number of times this VCL is used.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.12.3.2.1.4.1.18`
atmConfVcCCAdminStatus up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the remot…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.2`
atmConfVcLoopbackAdminStatus up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..F…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.3`
atmConfVcCongestionControl Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. For ace2002: 1 - Pack…	column	OctetString	`.1.3.6.1.4.1.164.12.3.2.1.4.1.5`
atmConfVcCCDirection both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent sends OAM CC cells. …	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.6`
atmConfVcCreationTime A date-time in which the VC was created.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.164.12.3.2.1.4.1.7`
atmConfVcOamSupport OAM support mode, which determines the device location in a segment wise. endToEndAndSegment - In this mode the OAM cells are generated before t…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.8`
atmConfVcCCActivationCtrl manual(1) - CC Activation process is disable activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from remote side.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.4.1.9`