atmConfIfFrameType – RAD-NtePrtCo-MIB

Object

column r/w Enumeration

The frame type. Valid values for a 155M interface:
sonet(2), sdh(3). Valid values for a T3 interface:
direct(4), plcpInternal(5), plcpExternal(6),
directNoScrmbling(10), plcpInternalNoScrmbling(11),
plcpExternalNoScrmbling(12). Valid values for Ethernet
interface: ethCrcTrans (8), ethCrcNotTrans(9).
(DS1 interfaces frame type is specified in the DSX1 mib).

Context

MIB: RAD-NtePrtCo-MIB
OID: .1.3.6.1.4.1.164.12.3.2.1.1.1.3
Type: column
Access: readwrite
Status: current
Parent: atmNteConfIfEntry
Table: atmNteConfIfTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	other
`2`	sonet
`3`	sdh
`4`	direct
`5`	plcpInternal
`6`	plcpExternal
`7`	e3
`8`	ethCrcTrans
`9`	ethCrcNotTrans
`10`	directNoScrmbling
`11`	plcpInternalNoScrmbling
`12`	plcpExternalNoScrmbling

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmConfIfTransmitClk The transmit clock of the port.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.1`
atmConfIfAllocatedBw Total VC Bandwidth Allocation.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.1.1.10`
atmConfIfLowerVpi The Lower possible VPI.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.1.1.11`
atmConfIfOamMode OAM support Mode, which determines the interface's location in a segment wise.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.12`
atmConfIfOamFailureInd This object allows user to define the type of indication (if any) that will be created upon a LB cell failure, for all VCs on which OAM loopback traffic is activated. disable…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.13`
atmConfIfLoopback Interface Loopback.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.2`
atmConfIfCardType deprecated The card type.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.4`
atmConfAtmIfVpiVciLimit The limit on the sum of the VPI+VCI bits for this interface.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.5`
atmConfIfHwFeatures HW features command.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.6`
atmConfIfOutputRate This parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values calculations, which …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.1.1.7`
atmConfIfInputRate This parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values calculations, which a…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.1.1.8`
atmConfAlarmForwarding Enables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. disable(…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.1.1.9`