wrLocalDialBackNumber
RAD-LanRger-MIB ·
.1.3.6.1.4.1.164.4.2.2.3.1.9
Object
This is the number that the Remote Modem will use to call the local
Modem at Dial Back.
Various command switches listed in Modem Dialing Number Menu
allows selection of tone, pulse-dialing, or various wait states.
P - Set Pulse dialing number .
T - Set Tone dialing number .
W - Wait for dialing tone before proceeding.
' - Pause for 2 seconds .
@ - Wait for silence, one ring, followed by 5 sec. of silence .
The Dialing Number will include both digits and letter/s
of the command switches. The order and validity will be
on user's responsibility.
The DisplayString can have up to 40 characters.
Context
- MIB
- RAD-LanRger-MIB
- OID
.1.3.6.1.4.1.164.4.2.2.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lanrangerModemEntry
- Table
- lanrangerModemTable
- Siblings
- 10
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lanrangerModemLinkIndex A list of asynchronous ports of the link, according to
ifIndex.
Synchronous ports will not appear in this table. Their
port number will be skipped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.3.1.1 |
| wrRingsBeforeAnswer Determines which ring the modem will wait to answer the
phone on. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.3.1.10 |
| lanrangerModemDialRetries The number of dialing retries requested.
Default = 0 | column | Integer32 | .1.3.6.1.4.1.164.4.2.2.3.1.11 |
| lanrangerModemName The Modem Name identifier for MBE/TRE.
Up to 50 characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.2 |
| lanrangerModemSettingString Modem setting String.
Up to 80 characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.3 |
| lanrangerModemAutobaudingSpeed Enable or disable autobauding.
When the Autobauding feature is enabled, the MBE/TRE
automatically ranges over various Baud rates, starting
with 115.2 Kbps, until the correct Bau… | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.4 |
| lanrangerModemResetBeforeSetup Reset the modem before setup is performed.
It is recommended to reset the modem before modem setup
session. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.5 |
| lanrangerModemAnalyzeAnswers Enable this option if a modem using non-standard answering is used.
When this mode is enabled, the MBE/TRE awaits modem answers
'CONNECT', 'CARRIER', or 'OK', after it transmits a… | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.6 |
| lanrangerModemSpeaker Toggle the Modem Speaker On or Off . | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.7 |
| lanrangerModemDialingNumber Various command switches listed in Modem Dialing Number Menu
allows selection of tone, pulse-dialing, or various wait states.
P - Set Pulse dialing number .
T - Set Tone dialing … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.8 |