pPPoEInitDelayRandomRange

RAD-LanRger-MIB · .1.3.6.1.4.1.164.4.2.2.7.1.1.15

MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32

This object represents the Initialization Delay Random Range (in seconds).
An initialization DELAY (number of seconds) is selected within this Random Range.
              
This DELAY is used to delay the initialization of every PPPoE session,
meaning that whenever a PPPoE session is reestablished,
the device will send the first PPPoE initialization packet (PADI)
only after this DELAY (in seconds).
              
Note:
When Random Range = 0 -->
there will be no delay in the initialization process.

Context

MIB: RAD-LanRger-MIB
OID: .1.3.6.1.4.1.164.4.2.2.7.1.1.15
Type: column
Access: readwrite
Status: current
Parent: pPPoEEntry
Table: pPPoETable
Siblings: 18

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pPPoECnfgIdx Usually the ifIndex of the PPP link the PPPoE session is on. Some applications may use this index otherwise.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.1`
pPPoENoOfUsages This object represents the number of times this PPPoE is used.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.10`
pPPoESchedRestartMode This object represents Scheduled Restart Mode.	column	Enumeration	`.1.3.6.1.4.1.164.4.2.2.7.1.1.11`
pPPoESchedRestartTime This object represents Scheduled Restart Time. It is relevant only when Scheduled Restart Mode is 'enable'.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.4.2.2.7.1.1.12`
pPPoESchedRestartRandomRange This object represents Scheduled Restart Random Range (in seconds). It is relevant only when Scheduled Restart Mode is 'enable'. A scheduled restart Random VALUE (n…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.13`
pPPoESchedRestartActualTime This object represents Scheduled Restart Actual Time. It is relevant only when Scheduled Restart Mode is 'enable'. For calculation of this time - see pPPoESchedRestartRandomRange.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.4.2.2.7.1.1.14`
pPPoEInitActualDelay This object represents Initialization Delay (in seconds), as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange).	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.16`
pPPoEVlanTagging This object represents the VLAN Tagging.	column	Enumeration	`.1.3.6.1.4.1.164.4.2.2.7.1.1.17`
pPPoEVlanId This object represents the VLAN ID.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.18`
pPPoEVlanPriority This object represents the VLAN Priority.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.19`
pPPoEID PPPoE session unique identifier.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.2`
pPPoERowStatus This object enables the user to create/delete entries in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.4.2.2.7.1.1.3`
pPPoEACName The access concentrator the PPPoE session should be established with.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.164.4.2.2.7.1.1.4`
pPPoEServiceName The service requested on the PPPoE session.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.164.4.2.2.7.1.1.5`
pPPoEEntityPointer This parameter represents the entity (interface/port etc) that is connected to this PPPoE. The value of this parameter is a pointer to an existing row of a table,…	column	SNMPv2-TCRowPointer	`.1.3.6.1.4.1.164.4.2.2.7.1.1.6`
pPPoESessionStatus notApplicable - none of the other states applies down - session not established up - session established lowerLayerDown - session not established due to lower layer failure adminD…	column	Enumeration	`.1.3.6.1.4.1.164.4.2.2.7.1.1.7`
pPPoESessionID This object represents PPPoE Session ID.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.4.2.2.7.1.1.8`
pPPoERemoteMacAddr This object represents the MAC Address of the Access Concentrator, with which the PPPoE session is established.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.164.4.2.2.7.1.1.9`