pPPoEEntityPointer
RAD-LanRger-MIB ·
.1.3.6.1.4.1.164.4.2.2.7.1.1.6
Object
This parameter represents the entity (interface/port etc)
that is connected to this PPPoE.
The value of this parameter is a pointer to an existing row of a table,
where the entity connected to this PPPoE is defined.
Example:
In case of an interface (from 2863.ifTable):
points to 'ifEntry' of corresponding row
= <ifEntry OID>.<ifIndex>
.
Context
- MIB
- RAD-LanRger-MIB
- OID
.1.3.6.1.4.1.164.4.2.2.7.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pPPoEEntry
- Table
- pPPoETable
- Siblings
- 18
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pPPoECnfgIdx Usually the ifIndex of the PPP link the PPPoE session is on.
Some applications may use this index otherwise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.1 |
| pPPoENoOfUsages This object represents the number of times this PPPoE is used. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.10 |
| pPPoESchedRestartMode This object represents Scheduled Restart Mode. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.7.1.1.11 |
| pPPoESchedRestartTime This object represents Scheduled Restart Time.
It is relevant only when Scheduled Restart Mode is 'enable'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.7.1.1.12 |
| pPPoESchedRestartRandomRange This object represents Scheduled Restart Random Range (in seconds).
It is relevant only when Scheduled Restart Mode is 'enable'.
A scheduled restart Random VALUE (n… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.13 |
| pPPoESchedRestartActualTime This object represents Scheduled Restart Actual Time.
It is relevant only when Scheduled Restart Mode is 'enable'.
For calculation of this time - see pPPoESchedRestartRandomRange. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.7.1.1.14 |
| pPPoEInitDelayRandomRange This object represents the Initialization Delay Random Range (in seconds).
An initialization DELAY (number of seconds) is selected within this Random Range.
This DE… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.15 |
| pPPoEInitActualDelay This object represents Initialization Delay (in seconds),
as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.16 |
| pPPoEVlanTagging This object represents the VLAN Tagging. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.7.1.1.17 |
| pPPoEVlanId This object represents the VLAN ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.18 |
| pPPoEVlanPriority This object represents the VLAN Priority. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.19 |
| pPPoEID PPPoE session unique identifier. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.2 |
| pPPoERowStatus This object enables the user to create/delete entries in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.4.2.2.7.1.1.3 |
| pPPoEACName The access concentrator
the PPPoE session should be established with. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.4.2.2.7.1.1.4 |
| pPPoEServiceName The service requested on the PPPoE session. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.4.2.2.7.1.1.5 |
| pPPoESessionStatus notApplicable - none of the other states applies
down - session not established
up - session established
lowerLayerDown - session not established due to lower layer failure
adminD… | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.7.1.1.7 |
| pPPoESessionID This object represents PPPoE Session ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.4.2.2.7.1.1.8 |
| pPPoERemoteMacAddr This object represents the MAC Address of the Access Concentrator,
with which the PPPoE session is established. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.164.4.2.2.7.1.1.9 |