lanrangerModemAutobaudingSpeed
RAD-LanRger-MIB ·
.1.3.6.1.4.1.164.4.2.2.3.1.4
Object
column
r/w
Enumeration
Enable or disable autobauding. When the Autobauding feature is enabled, the MBE/TRE automatically ranges over various Baud rates, starting with 115.2 Kbps, until the correct Baud rate of the modem is detected.
Context
- MIB
- RAD-LanRger-MIB
- OID
.1.3.6.1.4.1.164.4.2.2.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lanrangerModemEntry
- Table
- lanrangerModemTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | disable |
3 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lanrangerModemLinkIndex A list of asynchronous ports of the link, according to
ifIndex.
Synchronous ports will not appear in this table. Their
port number will be skipped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.3.1.1 |
| wrRingsBeforeAnswer Determines which ring the modem will wait to answer the
phone on. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.2.2.3.1.10 |
| lanrangerModemDialRetries The number of dialing retries requested.
Default = 0 | column | Integer32 | .1.3.6.1.4.1.164.4.2.2.3.1.11 |
| lanrangerModemName The Modem Name identifier for MBE/TRE.
Up to 50 characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.2 |
| lanrangerModemSettingString Modem setting String.
Up to 80 characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.3 |
| lanrangerModemResetBeforeSetup Reset the modem before setup is performed.
It is recommended to reset the modem before modem setup
session. | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.5 |
| lanrangerModemAnalyzeAnswers Enable this option if a modem using non-standard answering is used.
When this mode is enabled, the MBE/TRE awaits modem answers
'CONNECT', 'CARRIER', or 'OK', after it transmits a… | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.6 |
| lanrangerModemSpeaker Toggle the Modem Speaker On or Off . | column | Enumeration | .1.3.6.1.4.1.164.4.2.2.3.1.7 |
| lanrangerModemDialingNumber Various command switches listed in Modem Dialing Number Menu
allows selection of tone, pulse-dialing, or various wait states.
P - Set Pulse dialing number .
T - Set Tone dialing … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.8 |
| wrLocalDialBackNumber This is the number that the Remote Modem will use to call the local
Modem at Dial Back.
Various command switches listed in Modem Dialing Number Menu
allows selectio… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.4.2.2.3.1.9 |