systemStartupConfigUnconfirmed
RAD-GEN-MIB ·
.1.3.6.1.4.1.164.6.1.0.63
Object
notification
This Trap is sent during SW installation, if the user asked for a startup configuration confirmation and the device didn't receive a confirmation from the user. If the user didn't ask for confirmation - this trap will not be sent.
Context
- MIB
- RAD-GEN-MIB
- OID
.1.3.6.1.4.1.164.6.1.0.63- Type
- notification
- Status
- current
- Parent
- systemsEvents
- Siblings
- 61
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tftpStatusChangeTrap This trap is sent whenever the status of tftp changed. | notification | - | .1.3.6.1.4.1.164.6.1.0.1 |
| clkSrcChangeTrap This trap is sent upon any change in Clock Source. | notification | - | .1.3.6.1.4.1.164.6.1.0.10 |
| systemSerialPortDisabled This trap is sent if the serial port is disabled. | notification | - | .1.3.6.1.4.1.164.6.1.0.100 |
| systemSerialPortEnabled This trap is sent if the serial port is enabled. | notification | - | .1.3.6.1.4.1.164.6.1.0.101 |
| systemFactoryDefaultButtonPushed This trap is sent if the factory default button has been pressed
for five seconds, triggering the factory-default command. | notification | - | .1.3.6.1.4.1.164.6.1.0.102 |
| agnUploadDataTrap This trap is sent upon an upload data session termination.
For more details see product specification. | notification | - | .1.3.6.1.4.1.164.6.1.0.11 |
| enrollmentTrap This trap is a periodically trap, which sent to manager
untill Agent get any response (Get or Set) from this manager. | notification | - | .1.3.6.1.4.1.164.6.1.0.12 |
| agnPowerFailureTrap This trap is sent upon power failure. It is applicable for
the following devices:
1. Devices having one PS unit, which sense the failure in advance,
and still have time to sen… | notification | - | .1.3.6.1.4.1.164.6.1.0.13 |
| agnFanFailureTrap This trap is sent upon fan failure/recovery. | notification | - | .1.3.6.1.4.1.164.6.1.0.14 |
| agnSystemParameterChangeTrap This trap is sent upon any change of the systemParameter value. | notification | - | .1.3.6.1.4.1.164.6.1.0.15 |
| agnConfigDBChecksumError This trap indicates that the database currently
stored in the non-volatile memory of the device is corrupted | notification | - | .1.3.6.1.4.1.164.6.1.0.16 |
| agnAlarmBufferOverflow This trap indicates that the quantity of
alarm messages which have been written
in the alarm buffer, since the last clear command,
exceeds predefined threshold. (Buffer size)
T… | notification | - | .1.3.6.1.4.1.164.6.1.0.17 |
| agnAlarmBufferClear This trap indicates that
alarm buffer has been cleared. | notification | - | .1.3.6.1.4.1.164.6.1.0.18 |
| agnParametersValueChanged This trap indicates that due to software upgrade,
some of the parameters are assigned new values | notification | - | .1.3.6.1.4.1.164.6.1.0.19 |
| agnStatusChangeTrap This trap is sent whenever the state of the entity the agent is
responsible for changed.
TDM devices will send agnTestStatus variable to indicate the current test status. | notification | - | .1.3.6.1.4.1.164.6.1.0.2 |
| agnDriverSwMismatch There is mismatch between the SW driver and
the HW of the device uplink interface. | notification | - | .1.3.6.1.4.1.164.6.1.0.20 |
| agnActualLowRate The main link is synchronized
at a rate lower than expected. | notification | - | .1.3.6.1.4.1.164.6.1.0.21 |
| xModemFileTransferStatusTrap This trap is sent in the following cases:
- When an xModem File Transfer Session begins. In this case,
the trapVal.1 string sent will be: 'Start'.
- When an xModem File Transfer… | notification | - | .1.3.6.1.4.1.164.6.1.0.22 |
| agnStationClkFailureTrap This trap is sent upon Station Clock failure. | notification | - | .1.3.6.1.4.1.164.6.1.0.23 |
| successfulLogin This trap is sent when a user performed successful Login via
Terminal/Telnet/Web. This trap is used when the device is located
at End-User's premises while management is at Servi… | notification | - | .1.3.6.1.4.1.164.6.1.0.24 |
| failedLogin This trap is sent when a user tried to Login via Terminal/Telnet/Web
and failed. This trap is used when the device is located
at End-User's premises while management is at Service… | notification | - | .1.3.6.1.4.1.164.6.1.0.25 |
| modlChangeTrap This trap is sent whenever a module is inserted or removed.
The trap should include the new module type (e.g. modlParamType). | notification | - | .1.3.6.1.4.1.164.6.1.0.26 |
| licenseUpdateTrap This trap is sent whenever a license is successfully downloaded
or whenever a license's demo duration is expired. | notification | - | .1.3.6.1.4.1.164.6.1.0.27 |
| agnClkSrcStateChangeTrap The trap is sent upon change in Recovery Clock State. | notification | - | .1.3.6.1.4.1.164.6.1.0.28 |
| agnSelfTestResultChangeTrap The trap is sent upon each change in the result of a Self State operation. | notification | - | .1.3.6.1.4.1.164.6.1.0.29 |
| prtStatusChangeTrap This trap is sent whenever the state of a port changed.
Attached, will be parameter/s that indicate the new port status.
The attached variables will be specified in the specificat… | notification | - | .1.3.6.1.4.1.164.6.1.0.3 |
| agnCurrClkStateChangeTrap The trap is sent upon change in the state of the current (active) clock,
when it is a Recovery Clock. | notification | - | .1.3.6.1.4.1.164.6.1.0.30 |
| agnClkSrcFrequencyAlarmTrap The trap is sent upon Recovered Clock Frequency alarm. | notification | - | .1.3.6.1.4.1.164.6.1.0.31 |
| prtLoopDetectTrap This trap is sent upon Loop Detect (On/Off) on a certain port. | notification | - | .1.3.6.1.4.1.164.6.1.0.32 |
| swdlStatusResult This notification is sent when Software Down Load is finished.
The attached object indicates the File Name. | notification | - | .1.3.6.1.4.1.164.6.1.0.4 |
| systemDeviceTemperatureOra This trap indicates that Device Temprature is
above or below range. | notification | - | .1.3.6.1.4.1.164.6.1.0.41 |
| systemAlternateConfigLoaded This trap indicates that one of the following files:
factory-default-config,
rollback-config,
user-default-config
or other file
was loaded as running-config.
Note that … | notification | - | .1.3.6.1.4.1.164.6.1.0.45 |
| systemConfigurationSanity This notification MUST be sent if error has occurred while loading a configuration file.
It MUST only be sent once per file and only if the error policy is either 'ignore' or 'sto… | notification | - | .1.3.6.1.4.1.164.6.1.0.47 |
| systemDyingGasp This Trap Indicates power Dying Gasp | notification | - | .1.3.6.1.4.1.164.6.1.0.49 |
| intSwdlSlotFileMismatch This notification is sent when the card in the chosen slot doesn't match
the chosen file.
The attached object indicates the File Name. | notification | - | .1.3.6.1.4.1.164.6.1.0.5 |
| systemDyingGaspRecovery This Trap Indicates power Dying Gasp Recovery | notification | - | .1.3.6.1.4.1.164.6.1.0.50 |
| systemTraceMsgFatalError This Trap indicates that a critical error has occured in the device.
A corresponding message was added to the Trace Log Buffer. | notification | - | .1.3.6.1.4.1.164.6.1.0.51 |
| systemTraceMsgException This Trap indicates that an error has occured in the device.
A corresponding message was added to the Trace Log Buffer. | notification | - | .1.3.6.1.4.1.164.6.1.0.52 |
| systemDeviceStartup This Trap indicates that warm start or cold start of the device has occurred. | notification | - | .1.3.6.1.4.1.164.6.1.0.55 |
| systemHardwareFailure This Trap indicates that a Hardware Failure has occured. | notification | - | .1.3.6.1.4.1.164.6.1.0.58 |
| agnCounterChange This notification is sent when the value of a specific Counter is changed.
Agent can send as attached object the updated Counter.
For details about this Counter and attached objec… | notification | - | .1.3.6.1.4.1.164.6.1.0.6 |
| fanFailure This Trap indicates that there is a failure on the current fan. | notification | - | .1.3.6.1.4.1.164.6.1.0.64 |
| prtClkSrcChangeTrap This trap is sent upon any port clock change. | notification | - | .1.3.6.1.4.1.164.6.1.0.7 |
| systemSuccessfulLogin This Trap indicates that a successful login occurred. | notification | - | .1.3.6.1.4.1.164.6.1.0.70 |
| systemFailedLogin This Trap indicates that an unsuccessful login occurred. | notification | - | .1.3.6.1.4.1.164.6.1.0.71 |
| systemLogout This Trap indicates that logout was performed from the device. | notification | - | .1.3.6.1.4.1.164.6.1.0.72 |
| systemTrapHardSyncStart This Trap indicates that hard trap synchronization process between the device
and NMS has started. | notification | - | .1.3.6.1.4.1.164.6.1.0.77 |
| systemTrapHardSyncEnd This Trap indicates that hard trap synchronization process between the device
and NMS has ended. | notification | - | .1.3.6.1.4.1.164.6.1.0.78 |
| moduleFailTrap This trap is sent upon a module failure. | notification | - | .1.3.6.1.4.1.164.6.1.0.8 |
| systemUserReset This Trap Indicates that the user reset the device. | notification | - | .1.3.6.1.4.1.164.6.1.0.82 |
| faultPropagation This trap indicates that an interface/port/card received fault propagation. | notification | - | .1.3.6.1.4.1.164.6.1.0.87 |
| moduleInitFailTrap This trap is sent upon a module initialization failure. | notification | - | .1.3.6.1.4.1.164.6.1.0.9 |
| systemResourceOverflow This notification is sent when a system resource overflows. | notification | - | .1.3.6.1.4.1.164.6.1.0.90 |
| systemRemoteTerminalStarted This notification is sent when remote terminal to a virtual engine starts. | notification | - | .1.3.6.1.4.1.164.6.1.0.91 |
| systemRemoteTerminalEnded This notification is sent when remote terminal to a virtual engine is terminated,
either by a user or by an inactivity timeout. | notification | - | .1.3.6.1.4.1.164.6.1.0.92 |
| systemNtpAccuracyOutOfLimit This alarm notification is sent when NTP client accuracy becomes 'out of limit'. | notification | - | .1.3.6.1.4.1.164.6.1.0.93 |
| systemSummerTimeStarted deprecated This event is sent when the agent enters summer time.
The event was obsoleted by systemTimeChanged. | notification | - | .1.3.6.1.4.1.164.6.1.0.95 |
| systemSummerTimeEnded deprecated This event is sent when the agent exits summer time.
The event was obsoleted by systemTimeChanged. | notification | - | .1.3.6.1.4.1.164.6.1.0.96 |
| systemFileOverflow This event is sent if a file reaches its maximum size.
The file name can be inferred from the
indices of the fileSystemValidIndication attached variable. | notification | - | .1.3.6.1.4.1.164.6.1.0.97 |
| systemTimeChanged This event is sent when the system local time changes. | notification | - | .1.3.6.1.4.1.164.6.1.0.98 |
| systemTimeSourceChanged This event is sent when the source providing time for the system changes. | notification | - | .1.3.6.1.4.1.164.6.1.0.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmEventLogSourceName This object identifies the alarm or event source name defined as an ASCII string.
For detailed description see object activeAlarmSourceName. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.10 |
| alarmEventLogAlarmOrEventId This object identifies the ID of the alarm or the event. | column | AlarmEventId | .1.3.6.1.4.1.164.6.5.2.1.1.3 |
| alarmEventLogDescription The description of the alarm or event. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.4 |
| alarmEventLogSeverity For raised alarms this object denotes the specific alarm severity;
For cleared alarms its value is always clear(1).
For events the value of this object is always warning(6). | column | AlarmSeverity | .1.3.6.1.4.1.164.6.5.2.1.1.7 |
| alarmEventLogDateAndTime This variable denotes the time in which the alarm or the event occurred.
If the NE implements a real-time clock, this variable MUST hold the UTC time.
If the NE does not support a… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.5.2.1.1.2 |
| alarmEventReason This object is relevant for alarms only.
It shows the reason for clearing the alarm. | column | AlarmReason | .1.3.6.1.4.1.164.6.5.2.1.1.9 |
| SNMPv2-MIBsysName An administratively-assigned name for this managed
node. By convention, this is the node's fully-qualified
domain name. If the name is unknown, the value is
the zero-length stri… | scalar | OctetString | .1.3.6.1.2.1.1.5 |