systemParameter

This parameter can be used for different purposes: 
- TELNET session time-out in seconds.
	   	- Ace20: when trying to create row in a table that already
				 has row with the same values, if set of values has to be unique
				 in table, this attribute is set to the index of the existing row.
		- Optimux-T3: when CH interfaces are RJ-45, user can select via this
		         object, the interface type for each Group of channels: T1 or E1:
		         The selection will be a sum of the following Bits.
		         '0' = T1
		         '1' = E1
		         Bit    Group               Value for each Bit having '1'
				  1		  1 (CH-1..CH-8)        	  1
				  2		  2 (CH-9..CH-12)       	  2
				  3		  3 (CH-13..CH-20)	          4
				  4		  4 (CH-21..CH-28)	          8
				 Examples:
				 15 = all Groups are selected to be E1
				  6 = Group 2 and Group 3 are selected to be E1 
				     (Group 1 and Group 4 are T1).
		- FCD-A, FCD-M: user can select via this object the configuration
		         used for Get values of MSDSL parameters that don't have
		         configuration index.
		         1  =active configuration
		         255=temporary configuration.
		         Set of this object should be done before Getting the MSDSL 
		         RW parameters.
		- Ace2002: This parameter indicates the number of intervals that
		         were successfully uploaded upon statistics collection session.        
		- FCD-IP, WR, FCD-IPD, LA-240:
		         This parameter indicates whether Telnet Access is enabled/disabled:
		         Values:
				 2 - Telnet Access is Disabled.
				 3 - Telnet Access is Enabled. 				 
-Vmux-110: This parameter value equals to maximum number of bundles.
		-Optimux-155: Simmilar usage to Optimux T3. user can select via this
		         object, interface type T1 or E1 for each Group of 
		         channels (LIU):  LIU group consists of 7 channels. 
		         Up to 12 LIUs are represented (84 T1 Channels).
         The selection will be a sum of the 2**n
         For each bit:'0' = T1 ,'1' = E1
		         Bit    Group              
				  1		  1 (CH-1 ..  CH-7)   
				  2		  2 (CH-8 .. CH-14)  
				  3		  3 (CH-15 ..CH-21) 
           ...
				  9		  9 (CH-56.. CH-63) 
           ...
				  10	  10 (CH-64..CH-70) 
				  11	  11 (CH-71..CH-77) 
				  12	  12 (CH-78..CH-84)

MIB

RAD-GEN-MIB

OID

.1.3.6.1.4.1.164.6.2.18

Type

scalar

Access

readwrite

Status

current

Parent

agnt