systemNtpCurrentSource

RAD-GEN-MIB · .1.3.6.1.4.1.164.6.2.14.4.10
MIB view Table view

Object

scalar INET-ADDRESS-MIBInetAddress 
IP Address of the server (or local hardware) providing the
current Date and Time of the device. In addition to valid IP
address the following special values are used:
127.0.0.1 = local HW clock is used.
0.0.0.0 = no clock is available.
0.0.0.1 = clock provided by NTP, potentially from multiple servers

Context

MIB
RAD-GEN-MIB
OID
.1.3.6.1.4.1.164.6.2.14.4.10
Type
scalar
Access
readonly
Status
current
Parent
systemNtp
Siblings
12

Syntax

INET-ADDRESS-MIBInetAddress
Source
INET-ADDRESS-MIBInetAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
systemNtpMode
This variable represents the NTP Mode.
scalarEnumeration.1.3.6.1.4.1.164.6.2.14.4.1
sntpServerTable
This table contains parameters for each NTP Server. Entries in the table can be dynamically created. The entries created by user via sntpServerRowStatus, can also be changed or re…
table-.1.3.6.1.4.1.164.6.2.14.4.11
systemNtpLockingStatus
NTP locking status. This object is only relevant when the value of systemNtpUpdateInterval is zero. Otherwise, the value notApplicable(1) is returned.
scalarEnumeration.1.3.6.1.4.1.164.6.2.14.4.12
systemSummerTimeState
When the agent is not in summer time this object returns 0. While in summer time it returns the number of minutes the clock has been moved.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.14.4.13
systemNtpGmt
This variable represents the NTP GMT (Greenwich Mean Time), Possible values range is -12..12. For new devices/versions this variable will be in minutes.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.6.2.14.4.2
systemNtpServerAddressType
This variable represents the NTP Server Address Type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.6.2.14.4.3
systemNtpServerAddress
This variable represents the NTP Server Address.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.6.2.14.4.4
systemNtpUpdateInterval
This variable represents the NTP Update Interval, measured in seconds. It means, minimum time between two consecutive NTP requests.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.14.4.5
systemNtpCmd
This variable represents NTP possible commands. After the Agent accepts a command, it will automatically change the value to off(2).
scalarEnumeration.1.3.6.1.4.1.164.6.2.14.4.6
systemNtpTimeSinceLastPoll
Time in seconds, that passed from last polling of the configured SNTP servers. 0=Not Applicable (when this time is not known).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.14.4.7
systemNtpModeBITS
If Bit 0 (broadcastClient) is '1', Broadcast Mode is enabled, meaning that the device listens to the NTP broadcast messages and learns timestamps from them. If disabled (Bit 0 = '…
scalarBits.1.3.6.1.4.1.164.6.2.14.4.8
systemNtpCurrentSourceType
Type IP address of the NTP Server currently providing system TOD.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.6.2.14.4.9