systemNtpCmd
RAD-GEN-MIB ·
.1.3.6.1.4.1.164.6.2.14.4.6
Object
scalar
r/w
Enumeration
This variable represents NTP possible commands. After the Agent accepts a command, it will automatically change the value to off(2).
Context
- MIB
- RAD-GEN-MIB
- OID
.1.3.6.1.4.1.164.6.2.14.4.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- systemNtp
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | sendUpdateRequest |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemNtpMode This variable represents the NTP Mode. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.14.4.1 |
| systemNtpCurrentSource IP Address of the server (or local hardware) providing the
current Date and Time of the device. In addition to valid IP
address the following special values are used:
127.0.0.1 = … | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.2.14.4.10 |
| sntpServerTable This table contains parameters for each NTP Server.
Entries in the table can be dynamically created.
The entries created by user via sntpServerRowStatus, can also be
changed or re… | table | - | .1.3.6.1.4.1.164.6.2.14.4.11 |
| systemNtpLockingStatus NTP locking status.
This object is only relevant when the value of systemNtpUpdateInterval is zero.
Otherwise, the value notApplicable(1) is returned. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.14.4.12 |
| systemSummerTimeState When the agent is not in summer time this object returns 0.
While in summer time it returns the number of minutes the clock has been moved. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.14.4.13 |
| systemNtpGmt This variable represents the NTP GMT (Greenwich Mean Time),
Possible values range is -12..12.
For new devices/versions this variable will be in minutes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.14.4.2 |
| systemNtpServerAddressType This variable represents the NTP Server Address Type. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.2.14.4.3 |
| systemNtpServerAddress This variable represents the NTP Server Address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.2.14.4.4 |
| systemNtpUpdateInterval This variable represents the NTP Update Interval,
measured in seconds. It means, minimum time between two
consecutive NTP requests. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.14.4.5 |
| systemNtpTimeSinceLastPoll Time in seconds, that passed from last polling of the configured
SNTP servers. 0=Not Applicable (when this time is not known). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.14.4.7 |
| systemNtpModeBITS If Bit 0 (broadcastClient) is '1', Broadcast Mode is enabled,
meaning that the device listens to the NTP broadcast messages
and learns timestamps from them.
If disabled (Bit 0 = '… | scalar | Bits | .1.3.6.1.4.1.164.6.2.14.4.8 |
| systemNtpCurrentSourceType Type IP address of the NTP Server currently providing system TOD. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.2.14.4.9 |