alarmForwardingGroupConditions
RAD-GEN-MIB ·
.1.3.6.1.4.1.164.6.2.50.1.5
Object
This parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = All - Forwarding will take place only when all interfaces of the same group are faulty. 1 = Single - Forwarding will take place when at least one (single) interface of the same group (any of them) is faulty. n - forwarding will take place only when n (n < all) interfaces of the same group fail.
Context
- MIB
- RAD-GEN-MIB
- OID
.1.3.6.1.4.1.164.6.2.50.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alarmForwardingEntry
- Table
- alarmForwardingTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmForwardingFailPort An Index of the port on which a fail occurs. | column | Integer32 | .1.3.6.1.4.1.164.6.2.50.1.1 |
| alarmForwardingDirection This parameter determines the Direction of the Alarm Forwarding.
unidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort.
bidirectional - alar… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.10 |
| alarmForwardingAction Bit map representing actions to be taken on the entity set in alarmForwardingToPort,
when alarm is propagated from the entity set in alarmForwardingFromPort.
Bit 0 (noAction) has … | column | Bits | .1.3.6.1.4.1.164.6.2.50.1.11 |
| alarmForwardingActiveCause Bit map representing the cause for the current active forwarding entry.
When this forwarding entry is not active, the value will be: 0. | column | RAD-TCAlarmForwardingCause | .1.3.6.1.4.1.164.6.2.50.1.12 |
| alarmForwardingDescr Description of the current forwarding entry.
Default description will be: ' ' | column | OctetString | .1.3.6.1.4.1.164.6.2.50.1.13 |
| alarmForwardingPriorityDecrement The amount by which to decrement the priority of the
VRRP group the fault is propagated to.
If this object is higher than the VRRP group priority,
the priority will be decremented… | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.50.1.14 |
| alarmForwardingToPort An Index of the port that will be affected
upon the failure of the alarmForwardingFailPort. | column | Integer32 | .1.3.6.1.4.1.164.6.2.50.1.2 |
| alarmForwardingRowStatus Creation/ Deletion of rows in the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.2.50.1.3 |
| alarmForwardingRecoveryTime This parameter defines the maximum time (sec)
the affected port will hold the down state. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.50.1.4 |
| alarmForwardingCause Bit map representing the cause upon which alarm forwarding will take place. | column | RAD-TCAlarmForwardingCause | .1.3.6.1.4.1.164.6.2.50.1.6 |
| alarmForwardingRecoveryMode This parameter determines the Recovery Mode.
manual - The user should stop the alarm forwarding
by using the alarmForwardingRecoveryCommand.
automatic - Alarm forwarding will be… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.7 |
| alarmForwardingRecoveryCommand This parameter is a command. It is applicable when
alarmForwardingRecoveryMode = manual.
on - Will stop alarm forwarding.
After setting to 'On', the agent will set this paramete… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.8 |
| alarmForwardingDelay This parameter determines the period of time (in seconds) the
alarm of the alarmForwardingFailPort should exist before
starting alarm forwarding. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.50.1.9 |