alarmForwardingDirection

RAD-GEN-MIB · .1.3.6.1.4.1.164.6.2.50.1.10

MIB view Table view

Object

column r/w Enumeration

This parameter determines the Direction of the Alarm Forwarding. 
unidirectional - alarmForwardingFailPort affects the
                 alarmForwardingToPort.
bidirectional - alarmForwardingFailPort affects the
                alarmForwardingToPort AND vice-versa.
                For such cases, this value will be selected, instead of 
                entering an additional unidirectional entry
                in the table, where the indexes are swapped.

Context

MIB: RAD-GEN-MIB
OID: .1.3.6.1.4.1.164.6.2.50.1.10
Type: column
Access: readwrite
Status: current
Parent: alarmForwardingEntry
Table: alarmForwardingTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	unidirectional
`2`	bidirectional

Related Objects

Sibling Objects

Object	Type	Syntax	OID
alarmForwardingFailPort An Index of the port on which a fail occurs.	column	Integer32	`.1.3.6.1.4.1.164.6.2.50.1.1`
alarmForwardingAction Bit map representing actions to be taken on the entity set in alarmForwardingToPort, when alarm is propagated from the entity set in alarmForwardingFromPort. Bit 0 (noAction) has …	column	Bits	`.1.3.6.1.4.1.164.6.2.50.1.11`
alarmForwardingActiveCause Bit map representing the cause for the current active forwarding entry. When this forwarding entry is not active, the value will be: 0.	column	RAD-TCAlarmForwardingCause	`.1.3.6.1.4.1.164.6.2.50.1.12`
alarmForwardingDescr Description of the current forwarding entry. Default description will be: ' '	column	OctetString	`.1.3.6.1.4.1.164.6.2.50.1.13`
alarmForwardingPriorityDecrement The amount by which to decrement the priority of the VRRP group the fault is propagated to. If this object is higher than the VRRP group priority, the priority will be decremented…	column	Unsigned32	`.1.3.6.1.4.1.164.6.2.50.1.14`
alarmForwardingToPort An Index of the port that will be affected upon the failure of the alarmForwardingFailPort.	column	Integer32	`.1.3.6.1.4.1.164.6.2.50.1.2`
alarmForwardingRowStatus Creation/ Deletion of rows in the table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.6.2.50.1.3`
alarmForwardingRecoveryTime This parameter defines the maximum time (sec) the affected port will hold the down state.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.6.2.50.1.4`
alarmForwardingGroupConditions This parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = All - Forwarding will…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.6.2.50.1.5`
alarmForwardingCause Bit map representing the cause upon which alarm forwarding will take place.	column	RAD-TCAlarmForwardingCause	`.1.3.6.1.4.1.164.6.2.50.1.6`
alarmForwardingRecoveryMode This parameter determines the Recovery Mode. manual - The user should stop the alarm forwarding by using the alarmForwardingRecoveryCommand. automatic - Alarm forwarding will be…	column	Enumeration	`.1.3.6.1.4.1.164.6.2.50.1.7`
alarmForwardingRecoveryCommand This parameter is a command. It is applicable when alarmForwardingRecoveryMode = manual. on - Will stop alarm forwarding. After setting to 'On', the agent will set this paramete…	column	Enumeration	`.1.3.6.1.4.1.164.6.2.50.1.8`
alarmForwardingDelay This parameter determines the period of time (in seconds) the alarm of the alarmForwardingFailPort should exist before starting alarm forwarding.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.6.2.50.1.9`