alarmEventConfigSourceType
RAD-GEN-MIB ·
.1.3.6.1.4.1.164.6.5.1.4.1.2
Object
column
AlarmEventSourceType
This is the Source Type of alarm or event.
Context
- MIB
- RAD-GEN-MIB
- OID
.1.3.6.1.4.1.164.6.5.1.4.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- alarmEventConfigEntry
- Table
- alarmEventConfigTable
- Siblings
- 6
Syntax
AlarmEventSourceType
- Source
- AlarmEventSourceType
- Base type
Enumeration
Values & Constraints
Type Values
10000 | security |
20000 | system |
20100 | fan |
20200 | powerSupply |
20300 | systemFe |
20400 | alarmInput |
20600 | abm |
30000 | clock |
30100 | stationClock |
30200 | ptpRecovered |
30300 | clockDomain |
30400 | ptpRecoveredMaster |
30500 | clockDomainSource |
30600 | ptpdistributed |
30700 | gnss |
30800 | g82751Recovered |
31000 | g82751Master |
40000 | card |
40100 | smartSfp |
50000 | eth |
50100 | ethFe |
50200 | intEth |
50300 | xVirtualPort |
50400 | mngEth |
60000 | muxEthTdm |
61000 | muxEthTdmFe |
70000 | dsl |
70100 | vdsl |
70200 | shdsl |
70300 | adsl |
70400 | pcs |
70500 | shdslFe |
70600 | vdsl2 |
80000 | bri |
80100 | briFe |
90000 | voice |
100000 | sdhSonet |
100100 | vcVt |
100200 | path |
110000 | ds1 |
110100 | e1 |
110200 | t1 |
110300 | j1 |
110400 | e1i |
110500 | t1i |
110600 | j1i |
110700 | e1Fe |
110800 | t1Fe |
110900 | j1Fe |
111000 | ds1Opt |
120000 | ds3 |
120100 | e3 |
120200 | t3 |
120300 | ds0Bundle |
120400 | ds0G703 |
130000 | vcg |
140000 | atm |
140100 | atmPort |
140200 | atmVp |
140300 | atmVc |
150000 | serial |
150100 | serialBundle |
150200 | serialFe |
160000 | ima |
170000 | bridge |
170100 | bridgePort |
180000 | logicalMac |
190000 | ces |
200000 | etpPort |
200100 | etp |
210000 | flow |
220000 | svi |
230000 | gfp |
240000 | hdlc |
250000 | lag |
260000 | mpls |
270000 | oam |
270100 | oamEfm |
270200 | oamCfmMep |
270300 | oamCfmService |
270400 | oamCfmDestNe |
270500 | oamCnode |
270600 | oamCfmRMep |
280000 | ppp |
280100 | mlppp |
290000 | protection |
290100 | aps |
290200 | eps |
290300 | erp |
290400 | protectionMain |
290500 | protectionIo |
290600 | protectionVcPath |
290700 | protectionTdm |
290800 | protectionEth |
290900 | protectionPw |
291000 | protectionTdmMux |
291100 | erpPort |
300000 | router |
300100 | routerInterface |
300200 | ospf |
300300 | ospfNeighbor |
300400 | ospfInterface |
300600 | bgp |
300800 | ipBfd |
300900 | twampSession |
301000 | twampPeer |
301100 | twampResponder |
301200 | tunnel |
310000 | pw |
320000 | cmdChannel |
320100 | cmdIn |
320200 | cmdOut |
320300 | cellular |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmEventConfigId Alarm and Event ID.
Note: In order to apply a policy for all alarms/events on current source ID
or source type, this object should be set to the following according to
Textual Con… | column | AlarmEventId | .1.3.6.1.4.1.164.6.5.1.4.1.1 |
| alarmEventConfigSourceId Source ID. This object identifies the specific managed object that causes the alarm.
Note: In order to apply a policy to all Source IDs of the same Source Type,
the fields in the … | column | SourceId | .1.3.6.1.4.1.164.6.5.1.4.1.3 |
| alarmEventConfigSeverity For alarms: values will be one of: critical (3), major (4), minor (5).
For events: value must be warning (6). | column | AlarmSeverity | .1.3.6.1.4.1.164.6.5.1.4.1.4 |
| alarmEventConfigMasking This variable enables alarm and event masking on various reporting means. | column | AlarmEventMasking | .1.3.6.1.4.1.164.6.5.1.4.1.5 |
| alarmEventConfigRowStatus Enable rows creation/deletion.
This is used for managed objects that are dynamically created or removed. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.5.1.4.1.6 |
| alarmEventConfigSourceName ASCII String specifying the name of the source referenced by alarmEventLogSourceId.
The syntax will be similar to CLI.
Example: E1 2/4
where E1 is the source type, 2 is the slot n… | column | OctetString | .1.3.6.1.4.1.164.6.5.1.4.1.7 |