agnTrapDelay
RAD-GEN-MIB ·
.1.3.6.1.4.1.164.6.2.60
Object
This variable enables the user to set a delay (in seconds) before a trap is sent. This delay will be used only for traps that need to be sent during device initialization. It is needed because the device connected to our device starts transmitting traps later. The delay starts from the end of the Boot process. The device will keep the init traps in the correct order, and cancel those which clear former ones in the list. After this init delay, traps will be sent without a delay.
Context
- MIB
- RAD-GEN-MIB
- OID
.1.3.6.1.4.1.164.6.2.60- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agnt
- Siblings
- 73
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnHwVersion ASCII string for description and display of the agent hardware version,
as it is known by the agent software.The user can update the version
upon request when he changes compon… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.6.2.1 |
| agnLed This entry specifies the LEDs status of the agent module . Each led will be represented by 4
bits where the first 2 bits (left) will specify the status :
(00=NA, 01=OFF, 10=ON,… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.10 |
| trapTable This table may include the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
o… | table | - | .1.3.6.1.4.1.164.6.2.11 |
| fileTransfer | node | - | .1.3.6.1.4.1.164.6.2.12 |
| systemReset Reset action to be performed on the system.
- resetConfig (4) - reset to default configuration; in case of existing
user default configuration, it will b… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.13 |
| systemTiming | node | - | .1.3.6.1.4.1.164.6.2.14 |
| systemPort | node | - | .1.3.6.1.4.1.164.6.2.15 |
| systemResetAllStatsCmd Reset statistics of all ports and connections of the device. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.16 |
| systemClearTablesCmd tempCnfgTables - Set *RowStatus = destroy for all entries of
some tables having *RowStatus object, for
temporary configuration only! (255).
For the relevant tables, see product'… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.17 |
| systemParameter This parameter can be used for different purposes:
- TELNET session time-out in seconds.
- Ace20: when trying to create row in a table that already
has row with the sam… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.18 |
| agnGlobalAlarmMask The value of this attribute determines the alarm traps the
agent should mask and not send to the managers.
Each bit from a certain octet represents a certain alarm. | scalar | OctetString | .1.3.6.1.4.1.164.6.2.19 |
| agnTrapMask The value of this attribute determines the type of traps the
agent should mask and not send to the management console. The
value is differently determined for different products… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.2 |
| alarmSeverity This object specifies the severity of the alarms. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.20 |
| alarmState . | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.21 |
| agnTestStatus Indicates the current test status (for all levels: system,
card, port).
This attribute will be set to:
on(3): when there is at least one test in progress on the
system/… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.22 |
| systemSaveAndResetAllStatsCmd on - a command to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period.
off - agent will automatically change to this value, aft… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.23 |
| systemDefaultGateway Default Gateway's IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.6.2.24 |
| systemPsTable This table describes the PS types of a device.
Usage of this table is specified in the device's NMS SRS | table | - | .1.3.6.1.4.1.164.6.2.25 |
| agnFans This entry specifies the FANs existence and status.
Each fan will be represented by 2 bits,
where the first bit (right) will specify the existence:
(0= Not exist, 1=exist),
and th… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.26 |
| agnSendTrapParameter This object specifies if the agent will attach a specific
parameter to a trap.
For ACE2002 the agent will attach or not the openViewSeverity
parameter according to the… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.27 |
| agnSensorsStatus This entry specifies the Sensors (Temperature sensors or others)
existence and status.
Each sensor will be represented by 2 bits,
where the first bit (right) will specify the exi… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.28 |
| agnStationClockCard This entry specifies the station clock card
existence and status.
notExist - station clock card (piggy) does not exist.
notValid - station clock card exists but clock status is n… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.29 |
| agnTrapValue deprecated The value of the trap decoded in internal RAD format. Full description is given
in the Trap definition file | scalar | OctetString | .1.3.6.1.4.1.164.6.2.3 |
| xcIndexNext This object contains an appropriate value to
be used for xcIndex when creating
entries in the xcTable. The value
0 indicates that no unassigned entries are
available. To obtain t… | scalar | Integer32 | .1.3.6.1.4.1.164.6.2.30 |
| xcTable Configuration of system cross-connect entries.
The table follows the behavior described in RFC 2515,
RFC 1604 regarding the creation deletion and modification
of an entry within… | table | - | .1.3.6.1.4.1.164.6.2.31 |
| systemModule | node | - | .1.3.6.1.4.1.164.6.2.32 |
| agnNearFarConnection This parameter describes the connection between near-end and far-end agents. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.33 |
| agnAccess | node | - | .1.3.6.1.4.1.164.6.2.34 |
| systemInterface | node | - | .1.3.6.1.4.1.164.6.2.35 |
| systemOam | node | - | .1.3.6.1.4.1.164.6.2.36 |
| agnDeviceView This variable denotes the view of the device:
Look: old look, new look or new look 2.
Material: Plastic or Metal. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.37 |
| bitMappingTable This table maps bits of an octet string to an interface.
For ACE-2002 this table is used to map bits of VLAN port lists
to LAN VCC's. This table is the opposite view of the xcTabl… | table | - | .1.3.6.1.4.1.164.6.2.38 |
| bitMappingView A view of the bitMappingTable in one object - each entry in the
biMappingTable will have the corresponding Bit of this object
(bitMappingLocation) = '1'.
For ACE-2002 it is used… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.39 |
| agnChangeCnt The number of changes in system configuration that were reported to the
manager since last cold start | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.4 |
| hostTable Host interface table. | table | - | .1.3.6.1.4.1.164.6.2.40 |
| invNameXCTable Inverse Name XC Table.
This table can be used to ease the search for a connection first index
by the connection name. | table | - | .1.3.6.1.4.1.164.6.2.41 |
| agnDeviceCapabilities Indicates the optional capabilities that are implemented by this device
and are manageable through this MIB.
For each capability 1 BIT is allocated in each Octet starti… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.42 |
| rowInfoTable This table holds information of other tables. | table | - | .1.3.6.1.4.1.164.6.2.43 |
| agnStoreCmd Store command.
inFlash(3) = store the current Agent configuration in Flash memory.
asDefConfigFile(4) = store the current Agent configuration as
Defau… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.44 |
| agnFunctionTable This table is used in order to activate/deactivate device functions.
The index indicates the function. Each function can be Enabled or Disabled. | table | - | .1.3.6.1.4.1.164.6.2.45 |
| agnManagerConfigPorts This variable defines from which port/s this manager can manage the device.
The value is a sum of 2**n, where n is a bit assigned to a certain port.
For RIC-E1 and ETX 102 the val… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.46 |
| agnEgressRateRange This variable defines the valid ranges of egress rate.
For example, for ETX 102:
range 1 (2)= 128KBPS - 8MBPS,
range 2 (3)= 256KBPS - 16MBPS,
range 3 (4)= 512KBPS - 32MB… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.47 |
| agnNoOfCurrentConns This variable indicates the number of connections
currently configured for the agent. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.48 |
| agnIngressRateRange This variable defines the valid ranges of ingress rate.
For example, for ETX 102:
range 1 (2)= 128KBPS - 8MBPS,
range 2 (3)= 256KBPS - 16MBPS,
range 3 (4)= 512KBPS - 32M… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.49 |
| agnSpecific Object identifier of entity containing additional information
regarding this instance. | scalar | ObjectIdentifier | .1.3.6.1.4.1.164.6.2.5 |
| alarmForwardingTable The Alarm Forwarding Mechanism will be operated
for this table entries. | table | - | .1.3.6.1.4.1.164.6.2.50 |
| agnSwVersionSwapCmd SW switch command.
mainAndBackup (3) = Swap between Main SW and the backup one.
Agent will perform the required command and change automatically
the value of this object to off(2… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.51 |
| agnMaxNoOfConns This variable indicates the maximum number of connections
that can be configured for the agent. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.53 |
| agnGroupTable A table that enables associating components to Group/s
(or removing components of a group).
The Group Idx can then be used in other tables (e.g alarmForwardingTable). | table | - | .1.3.6.1.4.1.164.6.2.56 |
| agnStatNoOfUploadedIntervals This parameter indicates the Number of Intervals that were
successfully collected and uploaded in the last statistics collection session. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.57 |
| agnSyslog | node | - | .1.3.6.1.4.1.164.6.2.58 |
| agnNetworkInterfaceType This MIB object indicates the network interface type to be used
by the device.
It is used for devices that use only one network port type. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.59 |
| agnConfigMsg Full configuration message coded in internal RAD application format.
This entry describes agent's configuration.
For MP-2200 R3, this object describes agent's support … | scalar | OctetString | .1.3.6.1.4.1.164.6.2.6 |
| trapManagement | node | - | .1.3.6.1.4.1.164.6.2.61 |
| agnStringToIndexTable This table holds the conversions of tables from unique String
to numeric index. | table | - | .1.3.6.1.4.1.164.6.2.62 |
| agnRowPointerTable This table holds information about a specific entry in a table.
For example, number of usages of this row. | table | - | .1.3.6.1.4.1.164.6.2.63 |
| agnConfigVersion ASCII string of the Configuration Version. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.6.2.64 |
| agnResources | node | - | .1.3.6.1.4.1.164.6.2.65 |
| entityConvertIndexTable This table holds information about converted indexes of entities that
have more than one index. The original indexes can be each, up to Unsigned32 value,
though the total number o… | table | - | .1.3.6.1.4.1.164.6.2.66 |
| agnFiles | node | - | .1.3.6.1.4.1.164.6.2.67 |
| agnErrorMessageTable This table holds Agent error messages,caused by last SNMP Set operation/s.
For each SNMP Set fail response,Agent will report a relevant error message. | table | - | .1.3.6.1.4.1.164.6.2.68 |
| mngTrapIpTable This table indicates the destination address of the traps.
Internally it will be limited to ten addresses. | table | - | .1.3.6.1.4.1.164.6.2.7 |
| agnCapabilities | node | - | .1.3.6.1.4.1.164.6.2.70 |
| agnThreshold | node | - | .1.3.6.1.4.1.164.6.2.71 |
| agnProtection | node | - | .1.3.6.1.4.1.164.6.2.72 |
| agnLicense | node | - | .1.3.6.1.4.1.164.6.2.73 |
| agnPerformanceManagement | node | - | .1.3.6.1.4.1.164.6.2.74 |
| agnConfigChange | node | - | .1.3.6.1.4.1.164.6.2.75 |
| agnLldp | node | - | .1.3.6.1.4.1.164.6.2.76 |
| agnPanelType This object identify the device panel.
For ETX-36:
Panel number agnPanelType
k-32-41-00-m483 483
k-32-41-00-m484 484
k-32-41-00-m488 488
42.11.10.17 17.… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.78 |
| agnIndication Attribute describing the state of the entity the agent is responsible for.
In case of a modular entity, the value of this attribute will be according
to the component which is in … | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.8 |
| agnScalarObjects | node | - | .1.3.6.1.4.1.164.6.2.81 |
| agnMonitorModeCmd Setting this attribute to ON, will enforce the agent to change its mode of operation to
Monitor Mode | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.9 |