agnFunction

This MIB object indicates the function that will be enabled or disabled
in the device.
alarmForwarding= Fault Propagation (usually towards user port).
For Vmux:
routing (2) - enable/disable Router
backup  (3) - enable/disable Backup between E1/T1/Serial Link and ETH.
uplinkLoopDetect (5) - enable/disable Loop Detection on the TDM Uplink.
systemClock (6) - enable/disable the System Clock.
              
nps (7) - N+1 Protection Switching device physically connected to I/O
modules in Gmux2000.
              
ethOamCfm (8) - denotes that the device supports ETH OAM CFM  (802.1ag).
The list of supported CFM attributes is specified in agnFunctionAttributes.
Different from the other functions, the manager cannot activate the CFM.
agnFunctionActivation is set only by the agent. A value of enable (3)
denotes that the device supports ETH OAM CFM.
              
fileTransfer (9) - denotes that the device supports file transfer functions
and agnFunctionAttributes object which lists the supported functions.
Similar to ETH OAM CFM, agnFunctionActivation is set only by the agent.
A value of enable(3) denotes that the device supports file transfer functions
and agnFunctionAttributes.
              
erp (14) - Ethernet Ring Protection according to the G.8032 standard
              
The general protection related capabilitites eps(15), tdmPwProtect(16),
 pathSdhSonetProtect(17), aps(18), ethPortProtect(19) and tdmPortProtect(20)
 are correlated to the definition of the ProtectClassType.
              
eps (15) - Ethernet Protection Switching according to the G.8031 standard
              
tdmPwProtect (16) - TDM PW protection
              
pathSdhSonetProtect (17) - SDH/SONET VC Path Protection
              
aps (18) - SONET (APS) or SDH (MSP) switching protection
              
ethPortProtect (19) - Ethernet port protection
              
tdmPortProtect (20)- TDM port protection
              
tdmPw (21) - TDM PW functionality, for supported options see
 the agnFunctionAttributes below.
              
fileSystem (22) - File System support
              
ssfp (23)       - Smart SFP support
              
acl (32)        - access control list (security)
              
lldp (40)       - Link Layer Discovery Protocol
              
twamp (41)      - Two Way Active Measurement Protocol
              
flow (42)       - flow
              
vrrp (43)       - Virtual Router Redundancy Protocol
              
portFlowMirroring (45) - Port and flow mirroring 
              
ethPort        (46)    - Ethernet port capabilities
              
dhcpL2Relay    (47)    - DHCP Layer 2 Relay
              
nat            (48)    - Network Address Translator/Translation 
              
cellular       (49)    - Cellular

MIB

RAD-GEN-MIB

OID

.1.3.6.1.4.1.164.6.2.45.1.1

Type

column

Access

noaccess

Status

current

Parent

agnFunctionEntry

Table

agnFunctionTable

Siblings

3