qtechifOperStatusw
QTECH-INTERFACE-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.32
Object
column
Enumeration
The current operational state of the interface. If qtechApIfAdminStatus is admindown(2) then qtechApIfOperStatus should be admindown(2). If qtechApIfAdminStatus is changed to up(0) then qtechApIfOperStatus should change to up(0) . it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(0) state;
Context
- MIB
- QTECH-INTERFACE-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.32- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechIfEntry
- Table
- qtechIfTable
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | up |
1 | down |
2 | admindown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechIfIndex | column | QTECH-TCIfIndex | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.1 |
| qtechIfIpBroadcast Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.10 |
| qtechIfLayer | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.11 |
| qtechIfMode This value is meaning for only physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.12 |
| qtechIfCounterClear Setting its to any value but 0, will clear counters of this interface.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.13 |
| qtechIfEntryStatus Status of this entry, set this object to valid will create a interface,
and set its value to invalid will delete the interface of this entry. | column | QTECH-TCConfigStatus | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.14 |
| qtechIfMediumType Port medium type of this port,fiber or copper. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.15 |
| qtechIfDownCounter The counters of linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.16 |
| qtechIfInOctets The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management s… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.17 |
| qtechIfOutOctets The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the manag… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.18 |
| qtechIfBcastInhibit The percentage of the broadcast storm restraint on the
interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.19 |
| qtechIfPortType Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that por… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.2 |
| qtechIfNegotiation The negotiation status of the interface. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.20 |
| qtechIfPhysAddress The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must defi… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.21 |
| qtechIfAdminSpeedRW port speed settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.22 |
| qtechIfAdminDuplexRW port duplex settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.23 |
| qtechIfModeRW This value is meaning for only physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.24 |
| qtechIfSpeed An estimate of the interface's current bandwidth in units of
Mbits per second. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.25 |
| qtechifAdminStatus the interface keeps the admin state . | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.26 |
| qtechifOperStatus the interface keeps the oper state . | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.27 |
| qtechIfInNUcastPkts The counter of receiving packets contain BROADCAST and PACKET_MULTICAST . | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.28 |
| qtechIfOutNUcastPkts The counter of sending packets contain BROADCAST and PACKET_MULTICAST . | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.29 |
| qtechIfFlowControlAdminStatus Flow control of a port management status.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.3 |
| qtechIfUpDownTimes The counters of linkup and linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.30 |
| qtechifAdminStatusw The desired state of the interface. When a managed system initializes, all
interfaces start with ifAdminStatus in the admindown(1)
state. As a result of either explicit manageme… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.31 |
| qtechifSpeedw An estimate of the interface's current bandwidth in units of
Mbits per second. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.33 |
| qtechifMacAddress The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.34 |
| qtechifLastChange The length of the time that comes current state . | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.35 |
| qtechIfInPkts The number of packets received on this interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the m… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.36 |
| qtechIfDiscard The number of bound packets which were chosen to be
discarded even though no errors. One possible reason for
discarding such a packet could be to free up buffer space.
… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.37 |
| qtechIfBandwidthUsage Current bandwidth utilization of interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.38 |
| qtechIfInBitsRate The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.39 |
| qtechIfFlowControlOperStatus Oper status: after the negotiation between two ports connetted
the flow contrl status.
This attribute apply physical port and aggreate port | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.4 |
| qtechIfInPktRate The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.40 |
| qtechIfOutBitsRate The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.41 |
| qtechIfOutPktRate The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.42 |
| qtechIfAdminSpeed port speed settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.5 |
| qtechIfAdminDuplex port duplex settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.6 |
| qtechIfOperSpeed After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.7 |
| qtechIfOperDuplex After two port have negotiated the duplex status, and this object
is the working duplex status. while the port link status is down ,
then the speed status is unknown(3).
… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.8 |
| qtechIfManageStatus Management status of the interface. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.9 |