qtechApIfInUnknownProtos
QTECH-INTERFACE-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.16
Object
column
SNMPv2-SMICounter32
For packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces that
support protocol multiplexing the number of
transmission units received via the interface which
were discarded because of an unknown or unsupported
protocol. For any interface that does not support
protocol multiplexing, this counter will always be 0.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime.
Context
- MIB
- QTECH-INTERFACE-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechApIfEntry
- Table
- qtechApIfTable
- Siblings
- 35
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechApPhysAddress The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do n… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.1 |
| qtechApIfLastChange The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network … | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.10 |
| qtechApIfInOctets The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.11 |
| qtechApIfInUcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Disconti… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.12 |
| qtechApIfInNUcastPkts deprecated The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuit… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.13 |
| qtechApIfInDiscards The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possibl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.14 |
| qtechApIfInErrors For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or f… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.15 |
| qtechApIfOutOctets The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initializati… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.17 |
| qtechApIfOutUcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.18 |
| qtechApIfOutNUcastPkts deprecated The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.19 |
| qtechApIfIndex A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remai… | column | QTECH-TCIfIndex | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.2 |
| qtechApIfOutDiscards The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding su… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.20 |
| qtechApIfOutErrors For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.21 |
| qtechApIfOutQLen deprecated The length of the output packet queue (in packets). | column | RFC1155-SMIGauge | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.22 |
| qtechApIfLinkUPTimes Vlaues Of Linkup Times. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.23 |
| qtechApIfInDataOctets The data octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the manageme… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.24 |
| qtechApIfOutDataOctets The data octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the m… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.25 |
| qtechApIfMgmtUploadOctets The upload octets received on the mgmt interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the m… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.26 |
| qtechApIfMgmtDownloadOctets The download octets transmitted out of the
mgmt interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.27 |
| qtechApIfSpeedw An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.28 |
| qtechApIfMtuw The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.29 |
| qtechApIfDescr A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/s… | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.3 |
| qtechApIfPhysAddressw The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.30 |
| qtechApIfInUcastPktsw The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Disconti… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.31 |
| qtechApIfInNUcastPktsw deprecated The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuit… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.32 |
| qtechApIfOutUcastPktsw The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.33 |
| qtechApIfOutNUcastPktsw deprecated The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those t… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.34 |
| qtechApIfLinkUPTimesw The counters of linkup and linkdown times of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.35 |
| qtechApIfInPkts The total number of packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.36 |
| qtechApIfType The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual conventi… | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.4 |
| qtechApIfMtu The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.5 |
| qtechApIfSpeed An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.6 |
| qtechApIfPhysAddress The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must defin… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.7 |
| qtechApIfAdminStatus The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdmi… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.8 |
| qtechApIfOperStatus The current operational state of the interface.
If qtechApIfAdminStatus is admindown(2) then
qtechApIfOperStatus should be admindown(3). If qtechApIfAdminStatus is
changed to u… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.9 |