pwTDMPerfIntervalMissingPkts
PW-TDM-R-MIB ·
.1.3.6.1.4.1.164.20.13.1.6.1.4
Object
column
PerfHist-TC-MIBPerfIntervalCount
Number of missing packets (as detected via control word sequence number gaps).
Context
- MIB
- PW-TDM-R-MIB
- OID
.1.3.6.1.4.1.164.20.13.1.6.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwTDMPerfIntervalEntry
- Table
- pwTDMPerfIntervalTable
- Siblings
- 11
Syntax
PerfHist-TC-MIBPerfIntervalCount
- Source
- PerfHist-TC-MIBPerfIntervalCount
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwTDMPerfIntervalNumber A number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the m… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.13.1.6.1.1 |
| pwTDMPerfIntervalSESs The counter associated with the number of
Severely Error Seconds encountered. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.10 |
| pwTDMPerfIntervalUASs The counter associated with the number of
Unavailable Seconds encountered. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.11 |
| pwTDMPerfIntervalFC TDM Failure Counts (FC-TDM). The number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared. A
failure event t… | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.12 |
| pwTDMPerfIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.20.13.1.6.1.2 |
| pwTDMPerfIntervalDuration The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.13.1.6.1.3 |
| pwTDMPerfIntervalPktsReOrder Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
Feature. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.5 |
| pwTDMPerfIntervalJtrBfrUnderruns Number of times a packet needed to be played
out and the jitter buffer was empty. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.6 |
| pwTDMPerfIntervalMisOrderDropped Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.7 |
| pwTDMPerfIntervalMalformedPkt Number of packets detected with unexpected size, or
bad headers' stack | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.8 |
| pwTDMPerfIntervalESs The counter associated with the number of Error
Seconds encountered. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.4.1.164.20.13.1.6.1.9 |