pwTDMPerf1DayIntervalDuration
PW-TDM-R-MIB ·
.1.3.6.1.4.1.164.20.13.1.7.1.3
Object
column
SNMPv2-SMIUnsigned32
The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal value. Therefore this actual interval value is provided.
Context
- MIB
- PW-TDM-R-MIB
- OID
.1.3.6.1.4.1.164.20.13.1.7.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwTDMPerf1DayIntervalEntry
- Table
- pwTDMPerf1DayIntervalTable
- Siblings
- 11
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwTDMPerf1DayIntervalNumber The number of interval, where 1 indicates current day
measured period and 2 and above indicate previous days
respectively | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.13.1.7.1.1 |
| pwTDMPerf1DayIntervalSESs The counter associated with the number of Severely
Error Seconds. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.10 |
| pwTDMPerf1DayIntervalUASs The counter associated with the number of
UnAvailable Seconds.
NOTE: When first entering the UAS state, the number
of SES To UAS is added to this object, then … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.11 |
| pwTDMPerf1DayIntervalFC TDM Failure Counts (FC-TDM). The number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.12 |
| pwTDMPerf1DayIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.20.13.1.7.1.2 |
| pwTDMPerf1DayIntervalMissingPkts Number of missing packets (as detected via control word
sequence number gaps). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.4 |
| pwTDMPerf1DayIntervalPktsReOrder Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
feature. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.5 |
| pwTDMPerf1DayIntervalJtrBfrUnderruns Number of times a packet needed to be played
out and the jitter buffer was empty. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.6 |
| pwTDMPerf1DayIntervalMisOrderDropped Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.7 |
| pwTDMPerf1DayIntervalMalformedPkt Number of packets detected with unexpected size, or
bad headers' stack. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.8 |
| pwTDMPerf1DayIntervalESs The counter associated with the number of Error
Seconds encountered. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.20.13.1.7.1.9 |