pwTDMCfgSetUp2SynchTimeOut

PW-TDM-R-MIB · .1.3.6.1.4.1.164.20.13.1.3.1.11

Object

column r/w millisecond SNMPv2-SMIUnsigned32

The amount of time the host should wait before declaring the 
pseudo wire in down state,  if the number of consecutive 
TDM packets that have been received after changing the 
adminstrative status to up and after finalization of 
signaling (if supported) between the two PEs is smaller 
than pwTDMCfgConsecPktsInSynch. Once the the pw has 
OperStatus of 'up' this parameter is no longer valid. This 
parameter is defined to ensure that the host does not 
prematurely inform failure of the pw. In particular pw 'down' 
notifications should not be sent before expiration of this 
timer. This parameter is valid only after adminisrative 
changes of the status of the pw. If the pw fails due to 
network impairments a 'down' notification should be sent.
Object  MAY be changed when the related PW is
defined as not active.

Context

MIB: PW-TDM-R-MIB
OID: .1.3.6.1.4.1.164.20.13.1.3.1.11
Type: column
Access: readwrite
Status: current
Units: millisecond
Parent: pwTDMCfgEntry
Table: pwTDMCfgTable
Siblings: 20

Syntax

millisecond SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pwTDMCfgIndex Index to an entry in this table. The value is a copy of the assigned pwTDMCfgIndexNext	column	PwTDMCfgIndex	`.1.3.6.1.4.1.164.20.13.1.3.1.1`
pwTDMCfgConsecMissPktsOutSynch The number of consecutive missing packets that are required to enter the LOPS state. Object MAY be changed when the related PW is defined as not active.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.10`
pwTDMCfgPktReplacePolicy This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for any reason. This byte pattern is sent(played)on t…	column	Enumeration	`.1.3.6.1.4.1.164.20.13.1.3.1.12`
pwTDMCfgAvePktLossTimeWindow The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate. Object MAY be changed when the related PW is defined as not …	column	millisecond SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.20.13.1.3.1.13`
pwTDMCfgExcessivePktLossThreshold Excessive packet loss rate is detected by computing the average packetloss rate over a pwTDMCfgAvePktLossTimeWindow amount of time and comparing it with this threshold value. …	column	Percent SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.14`
pwTDMCfgAlarmThreshold Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec. Object MAY be changed when the related PW…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.15`
pwTDMCfgClearAlarmThreshold Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec. Object MAY be changed when th…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.16`
pwTDMCfgMissingPktsToSes Percent of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted. Object MAY be changed when the related P…	column	Percent SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.17`
pwTDMCfgTimestampMode Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming TDM attachment…	column	Enumeration	`.1.3.6.1.4.1.164.20.13.1.3.1.18`
pwTDMCfgStorageType This variable indicates the storage type for this row.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.164.20.13.1.3.1.19`
pwTDMCfgRowStatus Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entry is in used and the status is active: pwTDMCfgP…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.20.13.1.3.1.2`
pwTDMCfgPktFiller Filler byte pattern played out on the TDM interface if pwTDMCfgPktReplacePolicy was set to filler(3). Object MAY be changed when the related PW is defined as not active.	column	Unsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.20`
pwTDMCfgName A descriptive string, prefereably unique name, to an entry in this table. Object MAY be changed at any time.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.164.20.13.1.3.1.21`
pwTDMCfgConfErr deprecated Various configuration errors. Illegal settings within the pwTDMCfg table. Setting is done based on signaling, or else value (0) will be set	column	Bits	`.1.3.6.1.4.1.164.20.13.1.3.1.3`
pwTDMCfgPayloadSize The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.4`
pwTDMCfgPktReorder If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-se…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.164.20.13.1.3.1.5`
pwTDMCfgRtpHdrUsed If set to False: an RTP header is not pre-pended to the TDM packet.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.164.20.13.1.3.1.6`
pwTDMCfgJtrBfrDepth The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supporte…	column	microsecond SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.7`
pwTDMCfgPayloadSuppression Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disable' means: no suppresion under any condition. Ob…	column	Enumeration	`.1.3.6.1.4.1.164.20.13.1.3.1.8`
pwTDMCfgConsecPktsInSynch The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state. Object MAY be changed when the related PW is defined as not active.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.20.13.1.3.1.9`