pwCepValidIntervals
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.1.1.6
Object
column
HC-PerfHist-TC-MIBHCPerfValidIntervals
The number (n) of previous 15-minute intervals for which
data was collected.
An agent with CEP capability MUST be capable of supporting
at least 4 intervals. The RECOMMENDED default value for
n is 32, and n MUST NOT exceed 96.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwCepEntry
- Table
- pwCepTable
- Siblings
- 8
Syntax
HC-PerfHist-TC-MIBHCPerfValidIntervals
- Source
- HC-PerfHist-TC-MIBHCPerfValidIntervals
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..96
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepType Specifies the sub-type of CEP PW. Currently only
structured types are supported:
'spe'(1) : SONET STS-Nc signals.
'vt' (2) : SONET VT-x (x=1.5,2,3,6) sig… | column | Enumeration | .1.3.6.1.2.1.200.1.1.1.1 |
| pwCepSonetIfIndex This is a unique index within the ifTable. It represents
the interface index for the SONET path for SPE emulation
([RFC3592], Section 3.3), an interface index for the SONET
VT ([… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.200.1.1.1.2 |
| pwCepSonetConfigErrorOrStatus This object reports a configuration mismatch inside
the local node or between the local node and the peer node.
Some bits indicate an error, and some are simply status
reports tha… | column | Bits | .1.3.6.1.2.1.200.1.1.1.3 |
| pwCepCfgIndex Index to CEP configuration table below. Multiple CEP PWs
MAY share a single pwCepCfgEntry.
The value 0 indicates that no entries are available. | column | PW-TC-STD-MIBPwCfgIndexOrzero | .1.3.6.1.2.1.200.1.1.1.4 |
| pwCepTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason such as an
adjustment in the system… | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.2.1.200.1.1.1.5 |
| pwCepIndications Definitions:
'missingPkt'(0) - While playing out a sequence of packets,
at least one packet was determined to be missing based on a
gap in the CEP sequence number. … | column | Bits | .1.3.6.1.2.1.200.1.1.1.7 |
| pwCepLastEsTimeStamp The value of sysUpTime on the most recent occasion at which
the CEP PW entered the Errored Seconds (ES) or Severely
Errored Seconds (SES) state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.200.1.1.1.8 |
| pwCepPeerCepOption The value of the CEP option parameter as received from the
peer by the PW signaling protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.1.1.9 |