pwCepTimeElapsed
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.1.1.5
Object
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- pwCepEntry
- Table
- pwCepTable
- Siblings
- 8
Syntax
seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed
- Source
- HC-PerfHist-TC-MIBHCPerfTimeElapsed
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..86399
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepType Specifies the sub-type of CEP PW. Currently only
structured types are supported:
'spe'(1) : SONET STS-Nc signals.
'vt' (2) : SONET VT-x (x=1.5,2,3,6) sig… | column | Enumeration | .1.3.6.1.2.1.200.1.1.1.1 |
| pwCepSonetIfIndex This is a unique index within the ifTable. It represents
the interface index for the SONET path for SPE emulation
([RFC3592], Section 3.3), an interface index for the SONET
VT ([… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.200.1.1.1.2 |
| pwCepSonetConfigErrorOrStatus This object reports a configuration mismatch inside
the local node or between the local node and the peer node.
Some bits indicate an error, and some are simply status
reports tha… | column | Bits | .1.3.6.1.2.1.200.1.1.1.3 |
| pwCepCfgIndex Index to CEP configuration table below. Multiple CEP PWs
MAY share a single pwCepCfgEntry.
The value 0 indicates that no entries are available. | column | PW-TC-STD-MIBPwCfgIndexOrzero | .1.3.6.1.2.1.200.1.1.1.4 |
| pwCepValidIntervals The number (n) of previous 15-minute intervals for which
data was collected.
An agent with CEP capability MUST be capable of supporting
at least 4 intervals. The R… | column | HC-PerfHist-TC-MIBHCPerfValidIntervals | .1.3.6.1.2.1.200.1.1.1.6 |
| pwCepIndications Definitions:
'missingPkt'(0) - While playing out a sequence of packets,
at least one packet was determined to be missing based on a
gap in the CEP sequence number. … | column | Bits | .1.3.6.1.2.1.200.1.1.1.7 |
| pwCepLastEsTimeStamp The value of sysUpTime on the most recent occasion at which
the CEP PW entered the Errored Seconds (ES) or Severely
Errored Seconds (SES) state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.200.1.1.1.8 |
| pwCepPeerCepOption The value of the CEP option parameter as received from the
peer by the PW signaling protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.1.1.9 |