pwCepSonetConfigErrorOrStatus
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.1.1.3
Object
column
Bits
This object reports a configuration mismatch inside
the local node or between the local node and the peer node.
Some bits indicate an error, and some are simply status
reports that do not affect the forwarding process.
'timeslotInUse'(1) is set when another CEP PW has already
reserved a timeslot (or timeslots) that this CEP PW is
attempting to reserve.
'timeslotMisuse'(2) is set when the stated timeslot this
PW is trying to use is not legal, for example, if
specifying a starting timeslot of 45 for a SONET path of
an STS-12c width.
The peerZZZIncompatible bits are set if the local
configuration is not compatible with the peer configuration
as available from the CEP option received from the peer
through the signaling process and the local node cannot
support such asymmetric configuration.
The peerZZZAsymmetric bits are set if the local
configuration is not compatible with the peer configuration
as available from the CEP option received from the peer
through the signaling process, but the local node can
support such asymmetric configuration.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwCepEntry
- Table
- pwCepTable
- Siblings
- 8
Syntax
Bits
Values & Constraints
Enumerated Values
0 | other |
1 | timeslotInUse |
2 | timeslotMisuse |
3 | peerDbaIncompatible |
4 | peerEbmIncompatible |
5 | peerRtpIncompatible |
6 | peerAsyncIncompatible |
7 | peerDbaAsymmetric |
8 | peerEbmAsymmetric |
9 | peerRtpAsymmetric |
10 | peerAsyncAsymmetric |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepType Specifies the sub-type of CEP PW. Currently only
structured types are supported:
'spe'(1) : SONET STS-Nc signals.
'vt' (2) : SONET VT-x (x=1.5,2,3,6) sig… | column | Enumeration | .1.3.6.1.2.1.200.1.1.1.1 |
| pwCepSonetIfIndex This is a unique index within the ifTable. It represents
the interface index for the SONET path for SPE emulation
([RFC3592], Section 3.3), an interface index for the SONET
VT ([… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.200.1.1.1.2 |
| pwCepCfgIndex Index to CEP configuration table below. Multiple CEP PWs
MAY share a single pwCepCfgEntry.
The value 0 indicates that no entries are available. | column | PW-TC-STD-MIBPwCfgIndexOrzero | .1.3.6.1.2.1.200.1.1.1.4 |
| pwCepTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason such as an
adjustment in the system… | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.2.1.200.1.1.1.5 |
| pwCepValidIntervals The number (n) of previous 15-minute intervals for which
data was collected.
An agent with CEP capability MUST be capable of supporting
at least 4 intervals. The R… | column | HC-PerfHist-TC-MIBHCPerfValidIntervals | .1.3.6.1.2.1.200.1.1.1.6 |
| pwCepIndications Definitions:
'missingPkt'(0) - While playing out a sequence of packets,
at least one packet was determined to be missing based on a
gap in the CEP sequence number. … | column | Bits | .1.3.6.1.2.1.200.1.1.1.7 |
| pwCepLastEsTimeStamp The value of sysUpTime on the most recent occasion at which
the CEP PW entered the Errored Seconds (ES) or Severely
Errored Seconds (SES) state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.200.1.1.1.8 |
| pwCepPeerCepOption The value of the CEP option parameter as received from the
peer by the PW signaling protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.1.1.9 |