pwCepPerf1DayIntervalUASs
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.7.1.21
Object
The counter associated with the number of
unavailable seconds. See pwCepCfgSesToUAS.
NOTE: When first entering the UAS state, the number
of SesToUas is added to this object; then, as each
additional UAS occurs, this object increments by one.
NOTE: Similar to [RFC3592], if the agent chooses to update
the various performance statistics in real time, it must
be prepared to retroactively reduce the ES and SES counts
(by the value of pwCepCfgSesToUas) and increase the UAS
count (by that same value) when it determines that UAS
state has been entered.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.7.1.21- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- pwCepPerf1DayIntervalEntry
- Table
- pwCepPerf1DayIntervalTable
- Siblings
- 21
Syntax
seconds SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepPerf1DayIntervalNumber History Data Interval number. Interval 1 is the current day
measurement period; interval 2 is the most recent previous
day; and interval 30 is 31 days ago. | column | Unsigned32 | .1.3.6.1.2.1.200.1.7.1.1 |
| pwCepPerf1DayIntervalOutPosPtrAdjust Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.10 |
| pwCepPerf1DayIntervalOutPtrAdjustSecs Number of seconds in which a positive or negative pointer
adjustment was seen on the SONET path. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.11 |
| pwCepPerf1DayIntervalAbsPtrAdjust The relative adjustment of drift between inbound
and outbound streams. It is calculated as absolute
value of:
(InPosPtrAdjust - InNegPtrAdjust) -
(OutPosPtrAdjust - Ou… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.200.1.7.1.12 |
| pwCepPerf1DayIntervalMissingPkts Number of missing packets (as detected via CEP header
sequence number gaps). | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.13 |
| pwCepPerf1DayIntervalPktsOoseq Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations may not support this feature
(see pwCepCfgPktRe… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.14 |
| pwCepPerf1DayIntervalPktsOoRngDropped Number of packets detected out of range (via CEP header
sequence numbers) and could not be reordered or could not
fit in the jitter buffer. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.15 |
| pwCepPerf1DayIntervalJtrBfrUnderruns Number of times a packet needed to be played out, and the
jitter buffer was empty. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.16 |
| pwCepPerf1DayIntervalPktsMalformed Number of packets detected with unexpected size or bad
headers stack. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.17 |
| pwCepPerf1DayIntervalSummaryErrors A summary of all the packet-error types above (from
missing packets to bad length packets). | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.18 |
| pwCepPerf1DayIntervalESs The counter associated with the number of Errored
Seconds encountered. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.19 |
| pwCepPerf1DayIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.200.1.7.1.2 |
| pwCepPerf1DayIntervalSESs The counter associated with the number of Severely
Errored Seconds. See pwCepCfgMissingPktsToSes. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.20 |
| pwCepPerf1DayIntervalFC CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.22 |
| pwCepPerf1DayIntervalMoniSecs The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in situ… | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.2.1.200.1.7.1.3 |
| pwCepPerf1DayIntervalDbaInPacketsHC Number of DBA packets received. | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.200.1.7.1.4 |
| pwCepPerf1DayIntervalDbaOutPacketsHC Number of DBA packets sent. | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.200.1.7.1.5 |
| pwCepPerf1DayIntervalInNegPtrAdjust Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.6 |
| pwCepPerf1DayIntervalInPosPtrAdjust Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.7 |
| pwCepPerf1DayIntervalInPtrAdjustSecs Number of seconds in which a positive or negative pointer
adjustment was sent on the SONET path. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.8 |
| pwCepPerf1DayIntervalOutNegPtrAdjust Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.200.1.7.1.9 |