pwCepCfgName
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.3.1.14
Object
This variable contains the name of the Configuration entry. This name may be used to help the NMS to display the purpose of the entry.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.3.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pwCepCfgEntry
- Table
- pwCepCfgTable
- Siblings
- 15
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepCfgTableIndex Primary index to this table. | column | Unsigned32 | .1.3.6.1.2.1.200.1.3.1.1 |
| pwCepCfgPktErrorPlayOutValue This object defines the value played when inbound packets
have over/underflowed the jitter buffer or are missing
for any reason. This byte pattern is sent (played) on
the SONET p… | column | Unsigned32 | .1.3.6.1.2.1.200.1.3.1.10 |
| pwCepCfgMissingPktsToSes The number of missing packets detected (consecutive or not)
within a 1-second window to cause a Severely Errored
Second (SES) to be counted. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.11 |
| pwCepCfgSesToUas The number of consecutive SESs before declaring PW in
Unavailable Seconds (UAS) state (at which point
pwCepPerfUASs starts counting). The SesToUas default value
is 10 seconds.
… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.12 |
| pwCepCfgSecsToExitUas The number of consecutive nonSESs before declaring PW is NOT
in UAS state (at which point pwCepPerfUASs stops counting). | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.13 |
| pwCepCfgRowStatus For creating, modifying, and deleting this row.
None of the read-create objects' values can be changed
when pwCepCfgRowStatus is in the active(1) state. Changes
ar… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.200.1.3.1.15 |
| pwCepCfgStorageType This object indicates the storage type for this row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.200.1.3.1.16 |
| pwCepSonetPayloadLength The number of SONET bytes of the Path or VT carried as
payload within one packet. For example, for STS-1/VC-3 SPE
circuits, a value of 783 bytes indicates that each packet
carrie… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.2 |
| pwCepCfgMinPktLength This object defines the minimum CEP packet length in
number of bytes (including CEP header and payload).
It applies to CEP's bandwidth-savings packets. Currently,
DBA is the only… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.3 |
| pwCepCfgPktReorder This object defines if reordering is applied for incoming
packets.
If set 'true', as inbound packets are queued in the
jitter buffer, out-of-order packets are reord… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.200.1.3.1.4 |
| pwCepCfgEnableDBA This object defines when DBA is applied for packets sent
toward the PSN.
Setting 'ais' MUST cause CEP packet payload suppression
when AIS is detected on the associa… | column | Bits | .1.3.6.1.2.1.200.1.3.1.5 |
| pwCepCfgRtpHdrSuppress If this object is set to 'true', an RTP header is not
prepended to the CEP packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.200.1.3.1.6 |
| pwCepCfgJtrBfrDepth This object defines the number of microseconds
of expected packet delay variation for this CEP PW
over the PSN.
The actual jitter buffer MUST be at least twice this… | column | micro-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.7 |
| pwCepCfgConsecPktsInsync Consecutive packets with sequential sequence
numbers required to exit the LOPS state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.8 |
| pwCepCfgConsecMissingOutSync Consecutive missing packets required to enter
the LOPS state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.200.1.3.1.9 |