pktcSigEndPntConfigLongDurationKeepAlive
PKTC-IETF-SIG-MIB ·
.1.3.6.1.2.1.169.1.2.1.1.24
Object
Specifies a time out value, in minutes, for sending long duration call notification messages.
Context
- MIB
- PKTC-IETF-SIG-MIB
- OID
.1.3.6.1.2.1.169.1.2.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- pktcSigEndPntConfigEntry
- Table
- pktcSigEndPntConfigTable
- Siblings
- 37
Syntax
minutes SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigEndPntConfigCallAgentId This object contains a string indicating the call agent
name (e.g., ca@example.com). The call agent name, after
the character '@', MUST be a fully qualified domain name
(FQDN) an… | column | OctetString | .1.3.6.1.2.1.169.1.2.1.1.1 |
| pktcSigEndPntConfigRingBackTO This object contains the default time out value for ring
back. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the o… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.10 |
| pktcSigEndPntConfigReorderToneTO This object contains the default time out value for reorder
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of th… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.11 |
| pktcSigEndPntConfigStutterDialToneTO This object contains the default time out value for stutter
dial tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value … | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.12 |
| pktcSigEndPntConfigTSMax This MIB object is used as part of an NCS
retransmission algorithm. Prior to any retransmission,
the MTA must check to make sure that the time elapsed
since the sending of the in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.13 |
| pktcSigEndPntConfigMax1 This object contains the suspicious error threshold for
signaling messages. The pktcSigEndPntConfigMax1 object
indicates the retransmission threshold at which the MTA MAY
activel… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.14 |
| pktcSigEndPntConfigMax2 This object contains the disconnect error threshold for
signaling messages. The pktcSigEndPntConfigMax2 object
indicates the retransmission threshold at which the MTA
SHOULD cont… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.15 |
| pktcSigEndPntConfigMax1QEnable This object enables/disables the Max1 domain name server
(DNS) query operation when the pktcSigEndPntConfigMax1
threshold has been reached.
A value of true(1) indicates enabling, … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.169.1.2.1.1.16 |
| pktcSigEndPntConfigMax2QEnable This object enables/disables the Max2 domain name server
(DNS) query operation when the pktcSigEndPntConfigMax2
threshold has been reached.
A value of true(1) indicates enabling, … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.169.1.2.1.1.17 |
| pktcSigEndPntConfigMWD Maximum Waiting Delay (MWD) contains the maximum number of
seconds an MTA waits, after powering on, before initiating
the restart procedure with the call agent. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.18 |
| pktcSigEndPntConfigTdinit This MIB object represents the 'disconnected' initial
waiting delay within the context of an MTA's 'disconnected
procedure'. The 'disconnected procedure' is initiated when
an end… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.19 |
| pktcSigEndPntConfigCallAgentUdpPort This object contains the current value of the User
Datagram Protocol (UDP) receive port on which the
call agent will receive NCS from the endpoint.
For each particular endpoint, t… | column | Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.2 |
| pktcSigEndPntConfigTdmin This MIB object represents the 'disconnected' minimum
waiting delay within the context of an MTA's
'disconnected procedure', specifically when local user
activity is detected.
The… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.20 |
| pktcSigEndPntConfigTdmax This object contains the maximum number of seconds the MTA
waits, after a disconnect, before initiating the
disconnected procedure with the call agent. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.21 |
| pktcSigEndPntConfigRtoMax This object specifies the maximum number of seconds the MTA
waits for a response to an NCS message before initiating
a retransmission. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.22 |
| pktcSigEndPntConfigRtoInit This object contains the initial number of seconds for the
retransmission timer. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.23 |
| pktcSigEndPntConfigThist Time out period, in seconds, before no response is declared. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.25 |
| pktcSigEndPntConfigStatus This object contains the Row Status associated with the
pktcSigEndPntConfigTable. There are no restrictions or
dependencies amidst the columnar objects before this
row can be act… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.169.1.2.1.1.26 |
| pktcSigEndPntConfigCallWaitingMaxRep This object contains the default value of the maximum
number of repetitions of the Call Waiting tone that the
MTA will play from a single CMS request. The MTA MUST NOT
update thi… | column | Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.27 |
| pktcSigEndPntConfigCallWaitingDelay This object contains the delay between repetitions of the
Call Waiting tone that the MTA will play from a single CMS
request. | column | seconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.28 |
| pktcSigEndPntStatusCallIpAddressType This object contains the type of Internet address contained
in the MIB object 'pktcSigEndPntStatusCallIpAddress'.
Since pktcSigEndPntStatusCallIpAddress is expected… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.169.1.2.1.1.29 |
| pktcSigEndPntConfigPartialDialTO This object contains the value of the partial dial
time out.
The time out (TO) elements are intended to limit the time a
tone or frequency is generated. When this MIB object is s… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.3 |
| pktcSigEndPntStatusCallIpAddress This MIB object contains the chosen IP address of the CMS
currently being used for the corresponding endpoint.
The device determines the IP address by using DNS to
… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.169.1.2.1.1.30 |
| pktcSigEndPntStatusError This object contains the error status for this interface.
The operational status indicates that all operations
necessary to put the line in service have occurred, and the
CMS has … | column | Enumeration | .1.3.6.1.2.1.169.1.2.1.1.31 |
| pktcSigEndPntConfigMinHookFlash This is the minimum time a line needs to be on-hook for a
valid hook flash. The value of this object MUST be
greater than the value of
pktcSigEndPntConfigPulseDialMaxBreakTime. … | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.32 |
| pktcSigEndPntConfigMaxHookFlash This is the maximum time a line needs to be on-hook for a
valid hook flash. The value of
pktcSigEndPntConfigMaxHookFlash MUST be greater than
pktcSigEndPntConfigMinHookFlash. Th… | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.33 |
| pktcSigEndPntConfigPulseDialInterdigitTime This is the pulse dial inter-digit time out. This object
MUST only be set via the MTA configuration during the
provisioning process. | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.34 |
| pktcSigEndPntConfigPulseDialMinMakeTime This is the minimum make pulse width for the dial pulse.
The value of pktcSigEndPntConfigPulseDialMinMakeTime MUST
be less than pktcSigEndPntConfigPulseDialMaxMakeTime. This
obje… | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.35 |
| pktcSigEndPntConfigPulseDialMaxMakeTime This is the maximum make pulse width for the dial pulse.
The value of pktcSigEndPntConfigPulseDialMaxMakeTime MUST
be greater than pktcSigEndPntConfigPulseDialMinMakeTime.
This ob… | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.36 |
| pktcSigEndPntConfigPulseDialMinBreakTime This is the minimum break pulse width for the dial pulse.
The value of pktcSigEndPntConfigPulseDialMinBreakTime MUST
be less than pktcSigEndPntConfigPulseDialMaxBreakTime.
This ob… | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.37 |
| pktcSigEndPntConfigPulseDialMaxBreakTime This is the maximum break pulse width for the dial pulse.
The value of pktcSigEndPntConfigPulseDialMaxBreakTime MUST
be greater than pktcSigEndPntConfigPulseDialMinBreakTime.
This… | column | Milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.2.1.1.38 |
| pktcSigEndPntConfigCriticalDialTO This object contains the value of the critical
dial time out.
The time out (TO) elements are intended to limit the time a
tone or frequency is generated. When this MIB object is … | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.4 |
| pktcSigEndPntConfigBusyToneTO This object contains the default time out value for busy
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the o… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.5 |
| pktcSigEndPntConfigDialToneTO This object contains the default time out value for dial
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the o… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.6 |
| pktcSigEndPntConfigMessageWaitingTO This object contains the default time out value for message
waiting indicator. The MTA MUST NOT update this object
with the value provided in the NCS message (if
present). If th… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.7 |
| pktcSigEndPntConfigOffHookWarnToneTO This object contains the default time out value for the
off-hook warning tone. The MTA MUST NOT update this object
with the value provided in the NCS message (if present). If
th… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.8 |
| pktcSigEndPntConfigRingingTO This object contains the default time out value for
ringing. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the obj… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.169.1.2.1.1.9 |