pktcSigDevToneFreqRepeatCount
PKTC-IETF-SIG-MIB ·
.1.3.6.1.2.1.169.1.1.33.1.11
Object
column
Unsigned32
This MIB object indicates the number of times
to repeat the cadence cycle represented by the
on/off durations (refer to the MIB objects
pktcSigDevToneFreqOnDuration and
pktcSigDevToneFreqOffDuration).
Setting this object may result in a tone duration that is
longer or shorter than the overall signal duration
specified by the time out (TO) object for the
corresponding tone type. If the value of this MIB
Object indicates a longer duration than that
specified by the TO, the latter overrules the former,
and the desired tone duration will be truncated according
to the TO.
However, if the repeat count results in a shorter
tone duration than the signal duration specified by
the TO, the tone duration defined by the repeat count
takes precedence over the TO and will end the signal
event. In this case, the TO represents a time not to
be exceeded for the signal. It is recommended, to
ensure proper telephony signaling, that the TO
duration setting should always be longer than the
desired repeat count-time duration. A value of zero
means the tone sequence is to be played once but not
repeated.
Context
- MIB
- PKTC-IETF-SIG-MIB
- OID
.1.3.6.1.2.1.169.1.1.33.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktcSigDevMultiFreqToneEntry
- Table
- pktcSigDevMultiFreqToneTable
- Siblings
- 10
Syntax
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigDevToneNumber This MIB object represents the frequency reference
of a multi-frequency tone. | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.1 |
| pktcSigDevToneFreqOffDuration This MIB object represents the duration for which the
frequency reference corresponding to the tone type
is turned off. | column | milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.10 |
| pktcSigDevToneFirstFreqValue This MIB object represents the value of the first
frequency of a tone type. A value of zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.2 |
| pktcSigDevToneSecondFreqValue This MIB object represents the value of the second
frequency of a tone type. A value of zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.3 |
| pktcSigDevToneThirdFreqValue This MIB object represents the value of the third
frequency of a tone type. A value of zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.4 |
| pktcSigDevToneFourthFreqValue This MIB object represents the value of the fourth
frequency of a tone type. A value of zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.5 |
| pktcSigDevToneFreqMode This MIB object provides directive on the
modulation or summation of the frequencies
involved in the tone.
It is to be noted that while summation can
be done withou… | column | Enumeration | .1.3.6.1.2.1.169.1.1.33.1.6 |
| pktcSigDevToneFreqAmpModePrtg This MIB object represents the percentage of amplitude
modulation applied to the second frequency
when the MIB object pktcSigDevToneFreqMode is
set to a value of 'firstModulatedBy… | column | Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.7 |
| pktcSigDevToneDbLevel This MIB object contains the decibel level for each
analog signal (tone) that is locally generated
(versus in-band supervisory tones) and sourced to
the a-b terminals (TE connecti… | column | 1/10 of a dBm Integer32 | .1.3.6.1.2.1.169.1.1.33.1.8 |
| pktcSigDevToneFreqOnDuration This MIB object represents the duration for which the
frequency reference corresponding to the tone type
is turned on. | column | milliseconds Unsigned32 | .1.3.6.1.2.1.169.1.1.33.1.9 |