pktcSigDevCidDelayAfterLR

This object specifies the delay between the end of the
Line Reversal and the start of the FSK or DTMF signal.
This MIB object is used only when pktcSigDevCidMode is
set to a value of 'lrETS'.  This timing has a range of
300 to 800 ms.
The following table defines the default values
for this MIB object, depending on the signal type
(pktcSigDevCidMode), and MUST be followed:
          
Value of pktcSigDevCidMode       Default value
          
duringringingETS               any value  (not used)
dtAsETS                        any value  (not used)
rpAsETS                        any value  (not used)
lrAsETS                        any value  (not used)
lrETS                          400
          
An attempt to set this object while the value of
pktcSigDevCidMode is not set to a value of 'lrETS' will
result in an 'inconsistentValue' error.
          
The value of this MIB object MUST NOT persist across MTA
reboots.

MIB

PKTC-IETF-SIG-MIB

OID

.1.3.6.1.2.1.169.1.1.34

Type

scalar

Access

readwrite

Status

current

Units

Milliseconds

Parent

pktcSigDevObjects