pktcSigPulseSignalDbLevel
PKTC-EXCENTIS-SIG-MIB ·
.1.3.6.1.4.1.7432.2.1.1.20.1.3
Object
column
r/w
dBm Integer32
This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each frequency at which tones could be generated at the a and b terminals (TE connection point). An attempt to set this object while the value of pktcSigPulseSignalType is not enableMeterPulse, or meterPulseBurst will result in an 'inconsistent value' error.
Context
- MIB
- PKTC-EXCENTIS-SIG-MIB
- OID
.1.3.6.1.4.1.7432.2.1.1.20.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dBm
- Parent
- pktcSigPulseSignalEntry
- Table
- pktcSigPulseSignalTable
- Siblings
- 5
Syntax
dBm Integer32
Values & Constraints
Object Constraints
range: -350-0
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigPulseSignalType There are nine types of international pulse signals. These
signals are defined as follows:
initial ring
pulse loop close
pulse loop open
enable meter pulse
meter pulse burst… | column | Enumeration | .1.3.6.1.4.1.7432.2.1.1.20.1.1 |
| pktcSigPulseSignalFrequency This object is only applicable to the initialRing,
enableMeterPulse, and meterPulseBurst signal type. This
object identifies the frequency of the generated signal.
The followin… | column | Hertz Enumeration | .1.3.6.1.4.1.7432.2.1.1.20.1.2 |
| pktcSigPulseSignalDuration This object specifies the pulse duration for each
signal type. In addition, the MTA must accept the values
in the incremental steps specific for each signal type.
The following… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.20.1.4 |
| pktcSigPulseSignalPulseInterval This object specifies the repeat interval, or the period
for each signal type. In addition, the MTA must accept
the values in the incremental steps specific for each
signal typ… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.20.1.5 |
| pktcSigPulseSignalRepeatCount This object specifies how many times to repeat a pulse.
This object is not used by the enableMeterPulse signal
type and as such must have a value o… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.1.20.1.6 |