pktcSigDevToneFreqMode
PKTC-EXCENTIS-SIG-MIB ·
.1.3.6.1.4.1.7432.2.1.1.33.1.6
Object
column
r/w
Enumeration
This MIB Object provides directive on the
modulation or summation of the frequencies
involved in the tone.
It is to be noted that while summation can
be done without any constraint on the number
of frequencies, the modulation (amplitude)
holds good only when there are two frequencies
(first and second).
Thus:
- If the mode is set to a value of
firstModulatedBySecond (1), the first frequency
MUST be modulated by the second and the remaining
frequencies (third and fourth) ignored. The
percentage of amplitude modulation to be applied
is defined by the MIB Object
'pktcSigDevToneFreqAmpModePrtg'.
- If the mode is set to a value of
summation (2), all the frequencies MUST be
summed, without any modulation
Context
- MIB
- PKTC-EXCENTIS-SIG-MIB
- OID
.1.3.6.1.4.1.7432.2.1.1.33.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktcSigDevMultiFreqToneEntry
- Table
- pktcSigDevMultiFreqToneTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | firstModulatedBySecond |
2 | summation |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigDevToneNumber This MIB Object represents the frequency reference
of a multi-frequency tone. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.1 |
| pktcSigDevToneFreqOffDuration This MIB Object represents the duration for which the
frequency reference corresponding to the tone type
is turned off. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.10 |
| pktcSigDevToneFreqRepeatCount This MIB Object indicates the number of times
to repeat the cadence cycle represented by the
on/off durations (refer to the MIB Objects
pktcSigD… | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.11 |
| pktcSigDevToneFirstFreqValue This MIB Object represents the value of the first
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.2 |
| pktcSigDevToneSecondFreqValue This MIB Object represents the value of the second
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.3 |
| pktcSigDevToneThirdFreqValue This MIB Object represents the value of the third
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.4 |
| pktcSigDevToneFourthFreqValue This MIB Object represents the value of the fourth
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.5 |
| pktcSigDevToneFreqAmpModePrtg This MIB Object represents the percentage of amplitude
modulation applied to the second frequency
when the MIB Object 'pktcSigDevToneFreqMode' is
set to a value of 'firstModul… | column | Integer32 | .1.3.6.1.4.1.7432.2.1.1.33.1.7 |
| pktcSigDevToneDbLevel This MIB Object contains the decibel level for each
analog signal (tone) that is locally generated
(versus in band supervisory tones) and sourced to
the a-b ter… | column | dBm Integer32 | .1.3.6.1.4.1.7432.2.1.1.33.1.8 |
| pktcSigDevToneFreqOnDuration This MIB Object represents the duration for which the
frequency reference corresponding to the tone type
is turned on. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.9 |