pktcSigDevToneDbLevel
PKTC-EXCENTIS-SIG-MIB ·
.1.3.6.1.4.1.7432.2.1.1.33.1.8
Object
column
r/w
dBm Integer32
This MIB Object contains the decibel level for each
analog signal (tone) that is locally generated
(versus in band supervisory tones) and sourced to
the a-b terminals (TE connection point). Each tone
in itself may consist of multiple frequencies as
defined by the MIB table 'pktcSigDevMultiFreqToneTable'.
This MIB Object MUST reflect the desired level at
the Telco (POTS) a-b (T/R) terminals including the
affect of any MTA receiver gain (loss). This is required
so that locally generated tones are consistent with
remotely generated in band tones at the a-b terminals,
consistent with user expectations.
This MIB Object must be set for each tone.
When tones are formed by combining multi-frequencies,
the level of each frequency shall be set so as to result
in the tone level specified in this object at the a-b
(T/R) terminals.
The wide range of levels for this Object is required
to provide signal generator levels across the wide
range of gains (loss) - but does not imply the entire
range is to be achievable given the range of gains (loss)
in the MTA.
Context
- MIB
- PKTC-EXCENTIS-SIG-MIB
- OID
.1.3.6.1.4.1.7432.2.1.1.33.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dBm
- Parent
- pktcSigDevMultiFreqToneEntry
- Table
- pktcSigDevMultiFreqToneTable
- Siblings
- 10
Syntax
dBm Integer32
Values & Constraints
Object Constraints
range: -250--30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigDevToneNumber This MIB Object represents the frequency reference
of a multi-frequency tone. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.1 |
| pktcSigDevToneFreqOffDuration This MIB Object represents the duration for which the
frequency reference corresponding to the tone type
is turned off. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.10 |
| pktcSigDevToneFreqRepeatCount This MIB Object indicates the number of times
to repeat the cadence cycle represented by the
on/off durations (refer to the MIB Objects
pktcSigD… | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.11 |
| pktcSigDevToneFirstFreqValue This MIB Object represents the value of the first
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.2 |
| pktcSigDevToneSecondFreqValue This MIB Object represents the value of the second
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.3 |
| pktcSigDevToneThirdFreqValue This MIB Object represents the value of the third
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.4 |
| pktcSigDevToneFourthFreqValue This MIB Object represents the value of the fourth
frequency of a tone type. A value of Zero implies
absence of the referenced frequency. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.5 |
| pktcSigDevToneFreqMode This MIB Object provides directive on the
modulation or summation of the frequencies
involved in the tone.
It is to be noted that w… | column | Enumeration | .1.3.6.1.4.1.7432.2.1.1.33.1.6 |
| pktcSigDevToneFreqAmpModePrtg This MIB Object represents the percentage of amplitude
modulation applied to the second frequency
when the MIB Object 'pktcSigDevToneFreqMode' is
set to a value of 'firstModul… | column | Integer32 | .1.3.6.1.4.1.7432.2.1.1.33.1.7 |
| pktcSigDevToneFreqOnDuration This MIB Object represents the duration for which the
frequency reference corresponding to the tone type
is turned on. | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.33.1.9 |