pktcSigDevCIDRingAfterFSK
PKTC-EXCENTIS-SIG-MIB ·
.1.3.6.1.4.1.7432.2.1.1.25
Object
scalar
r/w
Milliseconds Unsigned32
This object specifies the delay between the end of the complete transmission of the FSK containing the Caller ID information and the start of the first ring pattern. It is only used when pktcSigDevCIDMode is dtAsETS, rpAsETS or lrAsETS. The following table defines the default values for this object depending on signal type: pktcSigDevCIDMode Default duringringingETS not used dtAsETS 250 ms rpAsETS 250 ms lrAsETS 250 ms An attempt to set this object while the value of pktcSigDevCIDMode is not dtAsETS, rpAsETS, or lrAsETS will result in an 'inconsistent value' error.
Context
- MIB
- PKTC-EXCENTIS-SIG-MIB
- OID
.1.3.6.1.4.1.7432.2.1.1.25- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- Milliseconds
- Parent
- pktcSigDevConfigObjects
- Siblings
- 32
Syntax
Milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 50-500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcSigDevCodecTable This table describes the MTA supported codec types. An MTA
MUST populate this table with all possible combinations of
codecs it supports for simultaneous operation. For
example… | table | - | .1.3.6.1.4.1.7432.2.1.1.1 |
| pktcSigDevR5Cadence This object specifies ring cadence 5 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.10 |
| pktcSigDevR6Cadence This object specifies ring cadence 6 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.11 |
| pktcSigDevR7Cadence This object specifies ring cadence 7 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.12 |
| pktcSigDevRgCadence This object specifies ring cadence rg (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.13 |
| pktcSigDevRsCadence This object specifies ring cadence rs (a user defined
field) The MTA MUST reject any attempt to make this object
repeatable. This object is required for the L line
package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.14 |
| pktcSigDefCallSigDscp The default value used in the IP header for setting the
Differentiated Services Code Point (DSCP) value for call
signaling. | scalar | DIFFSERV-DSCP-TCDscp | .1.3.6.1.4.1.7432.2.1.1.15 |
| pktcSigDefMediaStreamDscp This object contains the default value used in the IP
header for setting the Differentiated Services Code Point
(DSCP) value for media stream packets. The MTA MUST NOT
update t… | scalar | DIFFSERV-DSCP-TCDscp | .1.3.6.1.4.1.7432.2.1.1.16 |
| pktcSigCapabilityTable This table describes the signaling types supported by this
MTA. | table | - | .1.3.6.1.4.1.7432.2.1.1.17 |
| pktcSigDefNcsReceiveUdpPort This object contains the MTA User Datagram Protocol (UDP)
receive port that is being used for NCS call signaling.
This object should only be changed by the configuration
file. | scalar | Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.18 |
| pktcSigPowerRingFrequency This object must only be provided via the configuration
file during the provisioning process. The power ring
frequency is the frequency at which the sinusoidal voltage
must … | scalar | Hertz Enumeration | .1.3.6.1.4.1.7432.2.1.1.19 |
| pktcSigDevEchoCancellation This object specifies if the device is capable of echo
cancellation. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7432.2.1.1.2 |
| pktcSigPulseSignalTable The Pulse signal table defines the pulse signal operation.
There are nine types of international pulse signals,
with each signal having a set of provisionable parameters.
The v… | table | - | .1.3.6.1.4.1.7432.2.1.1.20 |
| pktcSigDevCIDMode For on-hook Caller ID, pktcSigDevCIDMode selects the
method of Caller ID. For the duringRingingETS method, the
Frequency Shift Keying (FSK) containing the Caller ID
information… | scalar | Enumeration | .1.3.6.1.4.1.7432.2.1.1.21 |
| pktcSigDevCIDFskAfterRing This object specifies the delay between the end of first
ringing pattern and the start of the transmission of the
FSK containing the Caller ID information. It is only used
when… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.22 |
| pktcSigDevCIDFskAfterDTAS This object specifies the delay between the end of the
Dual Tone Alert Signal (DT-AS) and the start of the
transmission of the FSK containing the Caller ID
information. This o… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.23 |
| pktcSigDevCIDFskAfterRPAS This object specifies the delay between the end of the
Ring Pulse Alert Signal (RP-AS) and the start of the
transmission of the FSK containing the Caller ID
information. This … | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.24 |
| pktcSigDevCIDDTASAfterLR This object specifies the delay between the end of the
Line Reversal and the start of the Dual Tone Alert Signal
(DT-AS). This object is only used when pktcSigDevCIDMode
is lr… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.26 |
| pktcSigDevVmwiMode For visual message waiting indicator (VMWI),
pktcSigDevVmwiMode selects the alerting signal method. For
the dtAsETS, rpAsETS, lrAsETS, and OSI methods,
the FSK containing the V… | scalar | Enumeration | .1.3.6.1.4.1.7432.2.1.1.27 |
| pktcSigDevVmwiFskAfterDTAS This object specifies the delay between the end of the
Dual Tone Alert Signal (DT-AS) and the start of the
transmission of the FSK containing the VMWI information.
This object… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.28 |
| pktcSigDevVmwiFskAfterRPAS This object specifies the delay between the end of the
Ring Pulse Alert Signal (RP-AS) and the start of the
transmission of the FSK containing the VMWI information.
This objec… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.29 |
| pktcSigDevSilenceSuppression This object specifies if the device is capable of
silence suppression (Voice Activity Detection). | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7432.2.1.1.3 |
| pktcSigDevVmwiDTASAfterLR This object specifies the delay between the end of the
Line Reversal and the start of the Dual Tone Alert Signal
(DT-AS) for VMWI information. This object is only used
when pk… | scalar | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.1.30 |
| pktcSigDevRingCadenceTable Cadence rings are defined by the telco governing
body for each country. The MTA must be able to support
various ranges of cadence patterns and cadence periods.
The MTA will be … | table | - | .1.3.6.1.4.1.7432.2.1.1.31 |
| pktcSigDevToneTable The Tone Table defines the various tone operations. Any
definition of the tones callWaiting1-4 in this table
should just contain the audible tone itself and NOT
contain the del… | table | - | .1.3.6.1.4.1.7432.2.1.1.32 |
| pktcSigDevMultiFreqToneTable This MIB table defines the characteristics of tones
with multiple frequencies. The constraints imposed
on the tones by the MIB table pktcSigDevToneTable
n… | table | - | .1.3.6.1.4.1.7432.2.1.1.33 |
| pktcSigDevCallerIdSigProtocol This object identifies the subscriber line protocol used
for signaling on-hook caller id information. Different
countries define different caller id signaling protocols to
supp… | scalar | Enumeration | .1.3.6.1.4.1.7432.2.1.1.4 |
| pktcSigDevR0Cadence This object specifies ring cadence 0 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.5 |
| pktcSigDevR1Cadence This object specifies ring cadence 1 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.6 |
| pktcSigDevR2Cadence This object specifies ring cadence 2 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.7 |
| pktcSigDevR3Cadence This object specifies ring cadence 3 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.8 |
| pktcSigDevR4Cadence This object specifies ring cadence 4 (a user defined
field). This object is required for the L line package. | scalar | PktcRingCadence | .1.3.6.1.4.1.7432.2.1.1.9 |