pktcNcsEndPntConfigReorderToneTO
PKTC-EXCENTIS-SIG-MIB ·
.1.3.6.1.4.1.7432.2.1.2.1.1.11
Object
This object contains the default timeout value for reorder tone. The MTA MUST NOT update this object with the value provided in the NCS message (if present). If the value of the object is modified by the SNMP Management Station, the MTA MUST use the new value as a default only for a new signal requested by the NCS message.
Context
- MIB
- PKTC-EXCENTIS-SIG-MIB
- OID
.1.3.6.1.4.1.7432.2.1.2.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- pktcNcsEndPntConfigEntry
- Table
- pktcNcsEndPntConfigTable
- Siblings
- 37
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcNcsEndPntConfigCallAgentId This object contains a string indicating the call agent
name (e.g.: ca@example.com). The call agent name, after
the character '@', MUST be a fully qualified domain name
(FQDN) … | column | OctetString | .1.3.6.1.4.1.7432.2.1.2.1.1.1 |
| pktcNcsEndPntConfigRingBackTO This object contains the default timeout value for ring
back. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the o… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.10 |
| pktcNcsEndPntConfigStutterDialToneTO This object contains the default timeout value for stutter
dial tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value … | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.12 |
| pktcNcsEndPntConfigTSMax This MIB object is used as part of an NCS
retransmission algorithm. Prior to any retransmission,
the MTA must check to make sure that the time elapsed
since the sending of t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.13 |
| pktcNcsEndPntConfigMax1 This object contains the suspicious error threshold for
signaling messages. The pktcNcsEndPntConfigMax1 object
indicates the retransmission threshold at which the MTA MAY
activ… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.14 |
| pktcNcsEndPntConfigMax2 This object contains the disconnect error threshold for
signaling messages. The pktcNcsEndPntConfigMax2 object
indicates the retransmission threshold at which the MTA
SHOULD co… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.15 |
| pktcNcsEndPntConfigMax1QEnable This object enables/disables the Max1 domain name server
(DNS) query operation when the pktcNcsEndPntConfigMax1
threshold has been reached. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7432.2.1.2.1.1.16 |
| pktcNcsEndPntConfigMax2QEnable This object enables/disables the Max2 domain name server
(DNS) query operation when the pktcNcsEndPntConfigMax2
threshold has been reached. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7432.2.1.2.1.1.17 |
| pktcNcsEndPntConfigMWD Maximum Waiting Delay (MWD) contains the maximum number of
seconds an MTA waits after powering on, before initiating
the restart procedure with the call agent. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.18 |
| pktcNcsEndPntConfigTdinit This MIB object represents the 'disconnected' initial
waiting delay within the context of an MTA's 'disconnected
procedure'. The 'disconnected procedure' is initiated when… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.19 |
| pktcNcsEndPntConfigCallAgentUdpPort This object contains the current value of the User
Datagram Protocol (UDP) receive port on which the
call agent will receive NCS signaling from the endpoint.
For each particula… | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.2 |
| pktcNcsEndPntConfigTdmin This MIB object represents the 'disconnected' minimum
waiting delay within the context of an MTA's
'disconnected
procedure', specifically when local user activity is
detec… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.20 |
| pktcNcsEndPntConfigTdmax This object contains the maximum number of seconds the MTA
waits after a disconnect, before initiating the
disconnected procedure with the call agent. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.21 |
| pktcNcsEndPntConfigRtoMax This object specifies the maximum number of seconds the MTA
waits for a response to an NCS message before initiating
a retransmission. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.22 |
| pktcNcsEndPntConfigRtoInit This object contains the initial number of seconds for the
retransmission timer. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.23 |
| pktcNcsEndPntConfigLongDurationKeepAlive Specifies a timeout value in minutes for sending long
duration call notification message. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.24 |
| pktcNcsEndPntConfigThist Timeout period in seconds before no response is declared. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.25 |
| pktcNcsEndPntConfigStatus This object contains the Row Status associated with the
pktcNcsEndPntConfigTable. There are no restrictions or
dependencies amidst the columnar objects before this
row can be … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7432.2.1.2.1.1.26 |
| pktcNcsEndPntConfigCallWaitingMaxRep This object contains the default value of the maximum
number of repetitions of the call waiting tone that the
MTA will play from a single CMS request. The MTA MUST NOT
update t… | column | Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.27 |
| pktcNcsEndPntConfigCallWaitingDelay This object contains the delay between repetitions of the
call waiting tone that the MTA will play from a single CMS
request. | column | seconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.28 |
| pktcNcsEndPntStatusCallIpAddressType This object contains the type of Internet address of the
CMS currently being used for this endpoint. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7432.2.1.2.1.1.29 |
| pktcNcsEndPntConfigPartialDialTO This object contains the value of the partial dial
time out. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.3 |
| pktcNcsEndPntStatusCallIpAddress This object contains the Internet address of the CMS
currently being used for this endpoint. This Internet
address is used to create the appropriate security
association. The t… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.7432.2.1.2.1.1.30 |
| pktcNcsEndPntStatusError This object contains the error status for this interface.
The operational status indicates that all operations
necessary to put the line in service have occurred, and the
CMS h… | column | Enumeration | .1.3.6.1.4.1.7432.2.1.2.1.1.31 |
| pktcNcsEndPntConfigMinHookFlash This is the minimum time a line needs to be on hook for a
valid hook flash. The value of this object MUST be
greater than the value of
pktcNcsEndPntConfigPulseDialMaxBreakTime.… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.32 |
| pktcNcsEndPntConfigMaxHookFlash This is the maximum time a line needs to be on hook for a
valid hook flash. The value of
pktcNcsEndPntConfigMaxHookFlash MUST be greater than
pktcNcsEndPntConfigMinHookFlash. T… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.33 |
| pktcNcsEndPntConfigPulseDialInterdigitTime This is the pulse dial inter-digit timeout. This object
MUST only be set via the configuration file during the
provisioning process. | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.34 |
| pktcNcsEndPntConfigPulseDialMinMakeTime This is the minimum make pulse width for the dial pulse.
The value of pktcNcsEndPntConfigPulseDialMinMakeTime MUST
be less than pktcNcsEndPntConfigPulseDialMaxMakeTime. This
ob… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.35 |
| pktcNcsEndPntConfigPulseDialMaxMakeTime This is the maximum make pulse width for the dial pulse.
The value of pktcNcsEndPntConfigPulseDialMaxMakeTime MUST
be greater than pktcNcsEndPntConfigPulseDialMinMakeTime.
This… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.36 |
| pktcNcsEndPntConfigPulseDialMinBreakTime This is the minimum break pulse width for the dial pulse.
The value of pktcNcsEndPntConfigPulseDialMinBreakTime MUST
be less than pktcNcsEndPntConfigPulseDialMaxBreakTime.
This… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.37 |
| pktcNcsEndPntConfigPulseDialMaxBreakTime This is the maximum break pulse width for the dial pulse.
The value of pktcNcsEndPntConfigPulseDialMaxBreakTime MUST
be greater than pktcNcsEndPntConfigPulseDialMinBreakTime.
T… | column | Milliseconds Unsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.38 |
| pktcNcsEndPntConfigCriticalDialTO This object contains the value of the critical
dial time out. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.4 |
| pktcNcsEndPntConfigBusyToneTO This object contains the default timeout value for busy
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the o… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.5 |
| pktcNcsEndPntConfigDialToneTO This object contains the default timeout value for dial
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if pr… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.6 |
| pktcNcsEndPntConfigMessageWaitingTO This object contains the default timeout value for message
waiting indicator. The MTA MUST NOT update this object
with the value provided in the NCS message (if
present). If th… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.7 |
| pktcNcsEndPntConfigOffHookWarnToneTO This object contains the default timeout value for the off
hook Warning tone. The MTA MUST NOT update this object
with the value provided in the NCS message (if
present). If th… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.8 |
| pktcNcsEndPntConfigRingingTO This object contains the default timeout value for
ringing. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the obj… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7432.2.1.2.1.1.9 |