portHdwMonitorDSR

Specifies whether the RS-232 signal DSR (Data Set Ready) should
be monitored, for Device Servers with a DTE serial interface.
On a Device Server with a DCE serial interface, this object 
specifies whether the DTR (Data Terminal Ready) signal should
be monitored.
              
For DTE interfaces, this is used with modems or any device that sends
a DSR signal. When it is monitored and the Device Server detects
a DSR signal, the line service is started. Default is Off. If
both Monitor DCD and Monitor DSR are enabled, both signals must
be detected before the line service is started.
              
For DCE interfaces, this is used with terminals or other devices
that output a DTR signal.
              
This value cannot be changed for internal modems.

MIB

PERLE-IOLAN-SDS-MIB

OID

.1.3.6.1.4.1.1966.12.1.5.2.1.9

Type

column

Access

readwrite

Status

current

Parent

portHdwEntry