PERLE-IOLAN-SDS-MIB Table View

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.3.1.1.1

hostStatus

When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Onc…

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.3.1.1.2

hostName

The host name used for this host entry.
To delete an entry, blank out this field.
If blank, this entry is currently unused.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.3.1.1.3

hostIpAddr

The host IP address used for this entry.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.3.1.1.4

fqdn

The host full qualified domain name for the host entry.
If blank, this entry is currently unused.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.3.1.1.5

userTable

table

.1.3.6.1.4.1.1966.12.1.4.1 · 1 row entry · 27 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk userTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::userTable'

The user table.

userEntry row .1.3.6.1.4.1.1966.12.1.4.1.1

An entry in the userEntry, each relating to a user.

Indexes

userIndex

Column Syntax OID

userIndex

The table entry number for this user.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.4.1.1.1

userStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.4.1.1.2

userName

The user name.
To delete a user, set this field to blank.
If blank, this entry is currently unused.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.1966.12.1.4.1.1.3

userService

The type of service that the user will use:
dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear
or sslraw.

Enumerationr/w

Enumerated Values:

1	dsprompt
2	telnet
3	ssh
4	rlogin
5	slip
6	ppp
7	tcpclear
8	sslraw

.1.3.6.1.4.1.1966.12.1.4.1.1.4

userLanguage

Sets the language the user will view all Menu, CLI,
and WebManager strings.

Enumerationr/w

Enumerated Values:

1	english
2	custom

.1.3.6.1.4.1.1966.12.1.4.1.1.5

userLevel

Admin-Total access to the Device Server. More than one admin user
account can exist, but we recommend that you only have one.
Normal-Limited access to the Device Server. Limited CLI commands
and Menu access, can configu…

Enumerationr/w

Enumerated Values:

1	admin
2	normal
3	restricted
4	menu

.1.3.6.1.4.1.1966.12.1.4.1.1.6

userHotKeyPrefix

The prefix that a user types to control the current session. The
default value is hex 01, which corresponds to Ctrl-a (^a):
^a number-Switches from one session to another, press ^a and then
the required session number. …

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.1.1.7

userPhoneNumber

The phone number the Device Server will dial to callback the user
(you must have set Callback to On). Enter the number without spaces.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.4.1.1.8

userCallBack

When On, enter a phone number for the Device Server to call the user
back (the Callback parameter is unrelated to the Line Dial parameter).
Note: the Device Server will allow callback only when a user is
authenticated. …

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.1.1.9

userIdleTimer

The amount of time, in seconds, that the Idle Timer will run. Use
this timer to close a connection because of inactivity. When the
Idle Timer expires, because there has been no exchange of data within
the specified time…

Integer32r/w

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.4.1.1.10

userSessionTimer

The amount of time, in seconds, that the Session Timer will run. Use
this timer to forcibly close a user's session (connection). When the
Session Timer expires, the Device Server will end the connection. The
default is …

Integer32r/w

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.4.1.1.11

userIpHost

When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target
host IP address. If 255.255.255.255 is specified in the configuration,
the user will be prompted for an IP address or host name. If no IP
address …

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.4.1.1.12

userTelnetPort

The TCP port number for the Telnet session.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.4.1.1.13

userSSHPort

The TCP port number for the SSH session.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.4.1.1.14

userTcpClearPort

The TCP port number for the TCP-Clear or SSL-Raw session.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.4.1.1.15

userFramedIp

Used for User Service PPP or SLIP, sets the IP address of the
remote user. Enter the address in dot decimal notation as follows:
255.255.255.254 (default)-The Device Server will use the Remote
IP Address set in the P…

userIpv6InterfaceIdentifier

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.4.1.1.16

userSubnetBits

(IPv4 only) If the remote user is on a subnet, enter the number of
bits in the subnet mask. For example, a subnet mask of 255.255.0.0
has 16 subnet/prefix bits.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.4.1.1.17

Used for User Service PPP, sets the IP address of the remote user.
Enter the address in IPv6 format. The first 64 bits of the Interface
Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the
expected format.

Ipv6InterfaceIdr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.4.1.1.18

userFramedMtu

Used for User Service PPP or SLIP, specifies the maximum size of
packets, in bytes, being transferred across the link. On noisy
links it might be preferable to fragment large packets being
transferred over the link, sin…

Integer32r/w

Constraints:
range: 64-1500

.1.3.6.1.4.1.1966.12.1.4.1.1.19

userFramedCompression

Used for User Service PPP or SLIP, determines whether Van Jacobsen
Compression is used on the link. VJ compression is a means of reducing
the standard TCP/IP header from 40 octets to approximately 5 octets.
This gives a…

userAllowAccessClusterPorts

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.1.1.20

userRouting

Determines the routing mode used for RIP packets on the PPP and SLIP
interfaces. Values are:
None-RIP packets are neither received nor sent by the Device Server.
Send-RIP packets can only be sent by the Device Server.
L…

Enumerationr/w

Enumerated Values:

1	none
2	send
3	listen
4	sendAndListen

.1.3.6.1.4.1.1966.12.1.4.1.1.21

userPortConnected

Port user is currently connected to. -1 if user not connected

Integer32

Constraints:
range: -1-2147483647

.1.3.6.1.4.1.1966.12.1.4.1.1.22

userSessionTime

Current User session time.

Integer32

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.4.1.1.23

userIdleTime

Current Idle time

Integer32

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.4.1.1.24

Allow/disallow the user to access to clustering ports.

portAccessUserIndex portAccessPortIndex

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.1.1.27

userHost

The name of the host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.1.1.28

userTunnel

The HTTP tunnel associated with the user's host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.1.1.29

portAccessTable

table

.1.3.6.1.4.1.1966.12.1.4.2 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portAccessTable'

The port access info table for user.

portAccessEntry row .1.3.6.1.4.1.1966.12.1.4.2.1

An entry in the portAccessTable, each relating to a user's
access privileges for a serial port.

Indexes

Column Syntax OID

portAccessUserIndex

The index for the user entry that port access applies to.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.4.2.1.1

portAccessPortIndex

The port number that user access applies to.

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.4.2.1.2

portAccessStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.4.2.1.3

portRWAccessAllowed

Enable or disable the user's read write access to the port.

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.4.2.1.4

portRIAccessAllowed

Enable or disable the user's read input access to the port.

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.4.2.1.5

portROAccessAllowed

Enable or disable the user's read output access to the port.

userSessionUserIndex userSessionNumber

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.4.2.1.6

userSessionTable

table

.1.3.6.1.4.1.1966.12.1.4.3 · 1 row entry · 43 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk userSessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::userSessionTable'

user.

userSessionEntry row .1.3.6.1.4.1.1966.12.1.4.3.1

An entry in the userEntry, each relating to a user.

Indexes

Column Syntax OID

userSessionUserIndex

The user number.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.4.3.1.1

userSessionNumber

The session number.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.1966.12.1.4.3.1.2

userSessionStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.4.3.1.3

userSessionType

The type of session for this session number for this user.

Enumerationr/w

Enumerated Values:

1	none
2	telnet
3	rlogin
4	ssh

.1.3.6.1.4.1.1966.12.1.4.3.1.4

userSessionAuto

Specify whether or not the session(s) will start automatically
when the user logs into the Device Server.

userSessionTelnetTermType

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.5

userSessionTelnetPort

For Telnet sessions, the TCP port number the target host is
listening on for incoming connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.4.3.1.6

userSessionTelnetHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.7

Type of terminal attached to this line; for example, ANSI or WYSE60.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.8

userSessionTelnetEcho

Toggles between local echo of entered characters and suppressing local
echo. Local echo is used for normal processing, while suppressing the
echo is convenient for entering text that should not be displayed on
the scree…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.9

userSessionTelnetMapnl

Maps carriage returns (CR) to carriage return line feed (CRLF). Default is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.10

userSessionTelnetMode

When On, keyboard input is not sent to the remote host until Enter is
pressed, otherwise input is sent every time a key is pressed. Default is Off.

userSessionTelnetInterrupt

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.11

Defines the interrupt character. Typing the interrupt character interrupts
the current process. This value is in hexadecimal with a default value
of 3 (ASCII value ^C).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.12

userSessionTelnetQuit

Defines the quit character. Typing the quit character closes and exits the
current Telnet session. This value is in hexadecimal with a default value
of 1c (ASCII value FS).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.13

userSessionTelnetEOF

Defines the end-of-file character. When Line Mode is On, entering the eof
character as the first character on a line sends the character to the remote
host. This value is in hexadecimal with a default value of 4 (ASCII …

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.14

userSessionTelnetErase

Defines the erase character. When Line Mode is Off, typing the erase character
erases one character. This value is in hexadecimal with a default value of 8
(ASCII value ^H).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.15

userSessionTelnetEchoCC

Defines the echo character. When Line Mode is On, typing the echo character
echoes the text locally and sends only completed lines to the host. This
value is in hexadecimal with a default value of 5 (ASCII value ^E).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.16

userSessionTelnetBreak

Defines the escape character. Returns you to the command line mode.
This value is in hexadecimal with a default value of 1d (ASCII value GS).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.4.3.1.17

userSessionSSHPort

The target host TCP port number.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.4.3.1.18

userSessionSSHHost

The host that the user will automatically connect to via SSH
after a successful login.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.19

userSessionSSHTermType

The type of terminal that will connecting via SSH.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.20

userSessionSSHVerbose

Displays debug messages on the terminal.

userSessionSSHCompression

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.21

Requests compression of all data. Compression is desirable
on modem lines and other slow connections, but will only
slow down things on fast networks.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.22

userSessionSSHAutoLogin

Creates an automatic SSH login, using the Name and Password values.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.23

userSessionSSHName

The name of the user logging into the SSH session.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.4.3.1.24

userSessionSSHProtocol

Specify the SSH client version that will be used
for the SSH session.

Enumerationr/w

Enumerated Values:

1	ssh1
2	ssh2
3	sshBoth

.1.3.6.1.4.1.1966.12.1.4.3.1.25

userSessionSSHRSA

An authentication method used by SSH version 1 and 2.
Use RSA authentication for the SSH session.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.26

userSessionSSHDSA

An authentication method used by SSH version 2.
Use DSA authentication for the SSH session.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.27

userSessionSSHKeyboard

The user types in a password for authentication.

userSessionSSHFirstSSH2Cipher

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.28

userSessionSSHCipherSSH1

Select the encryption method (cipher) that you
want to use for your SSH version 1 connection:
3DES or Blowfish

Enumerationr/w

Enumerated Values:

1	tripledes
2	blowfish

.1.3.6.1.4.1.1966.12.1.4.3.1.29

Select the first priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Poly1305

Enumerationr/w

Enumerated Values:

1	tripledes
2	blowfish
3	aes-cbc
4	cast
5	arcfour
6	aes-ctr
7	aes-gcm
8	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.30

userSessionSSHSecondSSH2Cipher

Select the second priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Po…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.31

userSessionSSHThirdSSH2Cipher

Select the third priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Pol…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.32

userSessionSSHFourthSSH2Cipher

Select the fourth priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Po…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.33

userSessionSSHFifthSSH2Cipher

Select the fifth priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Pol…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.34

userSessionRloginHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.35

userSessionRloginTermType

Type of terminal attached to this line; for example, ansi or wyse60.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.36

userSessionTelnetTunnelName

The name of the HTTP tunnel associated with the Telnet service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.37

userSessionSSHTunnelName

The name of the HTTP tunnel associated with the SSH service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.38

userSessionRloginTunnelName

The name of the HTTP tunnel associated with the Rlogin service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.4.3.1.39

userSessionStrictHostKeyChecking

When set, the device server must have a host key loaded.

userSessionSSHSixthSSH2Cipher

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.4.3.1.40

Select the sixth priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Pol…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.41

userSessionSSHSeventhSSH2Cipher

Select the seventh priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-P…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.42

userSessionSSHEighthSSH2Cipher

Select the eighth priority negotiation for the encryption
method (ciphers) that the Device Server will use for
the SSH version 2 connection:
None, 3DES, Blowfish, AES-CBC, CAST, Arcfour,
AES-CTR, AES-GCM, or ChaCha20-Po…

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.4.3.1.43

portTable

table

.1.3.6.1.4.1.1966.12.1.5.1 · 1 row entry · 39 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portTable'

The port configuration table.

portEntry row .1.3.6.1.4.1.1966.12.1.5.1.1

An entry in the port configuration table, each relating to a serial port.

Indexes

portIndex

Column Syntax OID

portIndex

Serial Port Index. Valid values are 1 to maximum port number the
Device Server supports

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.1.1.1

portStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.1.1.2

portName

Provide a name for the line so it can be easily identified.

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.1966.12.1.5.1.1.3

portService

Defines the Line Service, which determines how the
line will be used. USB ports can only be configured to
reverseraw(4),reversessh(11),,reversetelnet(8),
bidirectionalmodem(5), trueport(25),customapp(23)

Enumerationr/w

Enumerated Values:

1	dslogin
2	directraw
3	silentraw
4	reverseraw
5	bidirectionalmodem
6	directtelnet
7	silenttelnet
8	reversetelnet
9	directssh
10	silentssh
11	reversessh
12	directrlogin
13	silentrlogin
14	slip
15	ppp
16	printer
17	udp
18	vmodem
19	clienttunnel
20	servertunnel
21	modbusslave
22	modbusmaster
23	customapp
24	signalIo
25	trueport
26	powermanagement

.1.3.6.1.4.1.1966.12.1.5.1.1.4

portDial

Determines how a modem will work on the line. If your user
is remote and will be dialing in via modem or ISDN TA, set
this parameter to In; if the Device Server is being used as
a router, set this parameter to either In…

Enumerationr/w

Enumerated Values:

1	none
2	in
3	out
4	both

.1.3.6.1.4.1.1966.12.1.5.1.1.5

portModem

The name of the predefined modem that is used on this line.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.5.1.1.6

portPhone

The phone number to use when Dial is set to Out.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.5.1.1.7

portTermType

Specifies the type of terminal connected to the line:
Dumb, WYSE60, VT100, ANSI, TVI925, IBM3151TE,
VT320 (specifically supporting VT320-7),
HP700 (specifically supporting HP700/44),
Term1, Term2, Term3 (user defined te…

Enumerationr/w

Enumerated Values:

1	wyse60
2	vt100
3	ansi
4	dumb
5	tvi925
6	ibm3151
7	vt320
8	hp700
9	extra1
10	extra2
11	extra3

.1.3.6.1.4.1.1966.12.1.5.1.1.8

portPages

For DSLogin line service, this is the number of video
pages the terminal supports. Valid values are 1-7.
The default is 5 pages.

Integer32r/w

Constraints:
range: 1-7

.1.3.6.1.4.1.1966.12.1.5.1.1.9

portPreDefinedUser

For DSLogin line service, makes this a line that is dedicated
to the specified user. Only this user will be able to log in
on this line and they won't need to enter their login
name - just their password.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.1966.12.1.5.1.1.10

portDSPort

The Device Server port number.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.1.1.11

portIdleTimer

Enter a time period, in seconds, for which the Idle Timer will run.
Use this timer to close a connection because of inactivity. When the
Idle Timer expires, the Device Server will end the connection. The
maximum value i…

Integer32r/w

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.5.1.1.12

portSessionTimer

Enter a time, in seconds, for which the Session Timer will run. Use this
timer to forcibly close the session (connection). When the Session Timer
expires, the Device Server will end the connection. The default value is
…

Integer32r/w

Constraints:
range: 0-4294967

.1.3.6.1.4.1.1966.12.1.5.1.1.13

portSecurity

Enables/disables login/password authentication, locally or externally,
on reverse Telnet connections. The default is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.14

portBreak

Specifies how a break is interpreted:
None-The Device Server ignores the break key completely and
it is not passed through to the host. This is the default setting.
Local-The Device Server deals with the break locall…

Enumerationr/w

Enumerated Values:

1	off
2	local
3	remote
4	brkintr

.1.3.6.1.4.1.1966.12.1.5.1.1.15

portInboundFlowControl

Determines if input flow control is to be used.
Default is On. This is active only when Line Flow Control
is set to Soft, Hard, or Both.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.16

portOutboundFlowControl

Determines if output flow control is to be used.
Default is On. This is active only when Line Flow Control
is set to Soft, Hard, or Both.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.17

portInitialMode

Specifies the initial interface a user navigates when logging
into the line; either the Menu or a prompt for the CLI.
The default is CLI.

Enumerationr/w

Enumerated Values:

1	cli
2	menu

.1.3.6.1.4.1.1966.12.1.5.1.1.18

portReset

Resets the terminal type connected to the line when a user logs out.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.19

portKeepalive

Enables a per-connection TCP keepalive feature; after approximately
3 minutes of network connection idle time, the connection will send
a gratuitous ACK to the network peer, either ensuring the connection
stays active O…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.20

portMapCR

Maps carriage returns (CR) to carriage return line feed (CRLF).
The default value is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.21

portMOTD

Enables/disables the message of the day on the line.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.22

portHotKeyPrefix

The prefix that a user types to lock a line or redraw the Menu. The
default value is hex 01, which corresponds to Ctrl-a (^a) (hex value
02 would be Ctrl-b (^b), etc.):
^a l-(Lowercase L) Locks the line until the user u…

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.1.1.23

portLock

When enabled, the user can lock his terminal with a password using the
Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The Device Server
prompts the user for a password and a confirmation.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.24

portEnable

Is the Port Enabled. This field is not available on 1-port units.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.25

portMultiSession

The number of Multisessions allowed on this port

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.1.1.26

portDialRetries

The number of Dial Retries.

Integer32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.1966.12.1.5.1.1.27

portDialTimeout

The timeout value when dialing in seconds.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.1966.12.1.5.1.1.28

portInternetAddress

The Internet address of this port.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.1.1.29

portRawOption

Defines the multihost Service and direct connection initiate mode

Enumerationr/w

Enumerated Values:

1	noneMultihost
2	multihost
3	directAny

.1.3.6.1.4.1.1966.12.1.5.1.1.30

portDirectTrigger

Defines the direct connection initiate char

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.1.1.31

portDataLogging

When on, serial data will be buffered if the TCP connection is lost.
When the TCP connection is re-established, the buffered serial data will
be sent to its destination (this option is not available when Monitor DSR, …

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.32

portSacSupport

When on, a user can access SAC (the interface of the Microsoft
Emergency Management Systems utility) through EasyPort Web when the device server's
serial port is connected to a Microsoft Server 2003 or
Microsoft Serv…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.33

portSendName

Send the port name on connect. Applies to direct raw, silent raw,
and TruePort (server-initiated) srevice types.

portConnectInitiateString

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.1.1.34

String to be sent when connection is initiated.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.1966.12.1.5.1.1.35

portConnectTerminateString

String to be sent when connection is terminated.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.1966.12.1.5.1.1.36

portConnectStringDelay

The delay after sending the connect or terminate string, in milliseconds

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.1.1.37

portBreakLength

Amount of time, in milliseconds, to send a break signal (tunnel service only)

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.1.1.38

portBreakDelay

The delay, in milliseconds, after sending a break signal (tunnel service only)

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.1.1.39

portHdwTable

table

.1.3.6.1.4.1.1966.12.1.5.2 · 1 row entry · 33 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portHdwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portHdwTable'

Port.

portHdwEntry row .1.3.6.1.4.1.1966.12.1.5.2.1

An entry in the portHdwEntry, each relating to a port.

Indexes

portHdwIndex

Column Syntax OID

portHdwIndex

Port hardware Index

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.2.1.1

portHdwStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.2.1.2

portHdwInterface

Specifies the type of line that is being used with the
Device Server. Select either EIA-232, EIA-422, or EIA-485.

Enumerationr/w

Enumerated Values:

1	eia232
2	eia422
3	eia485

.1.3.6.1.4.1.1966.12.1.5.2.1.3

portHdwSpeed

Specifies the baud rate of the line; keep in mind that
speed is affected by the length of the cable. When bCustom
is set, then the baud rate is specified by portHwdCustomSpeed.
Internal modems only support the followin…

Enumerationr/w

Enumerated Values:

1	b50
2	b75
3	b110
4	b134
5	b150
6	b200
7	b300
8	b600
9	b1200
10	b1800
11	b2400
12	b4800
13	b9600
14	b19200
15	b38400
16	b57600
17	b115200
18	b230400
23	b28800
24	bCustom

.1.3.6.1.4.1.1966.12.1.5.2.1.4

portHdwDataBits

Specifies the number of bits in a byte. The default is 8.
Internal modems only support 7 and 8 data bits.

Enumerationr/w

Enumerated Values:

1	d5
2	d6
3	d7
4	d8

.1.3.6.1.4.1.1966.12.1.5.2.1.5

portHdwParity

Specifies if you are using Even, Odd, or No parity on the line.
If you want to force a parity type, you can specify Mark for 1
or Space for 0.

Enumerationr/w

Enumerated Values:

1	none
2	odd
3	even
4	mark
5	space

.1.3.6.1.4.1.1966.12.1.5.2.1.6

portHdwStopBits

Specifies the number of stop bits that follow a byte.
Certain models do not support 1.5 stop bits. Internal
modems only support 1 stop bit.

Enumerationr/w

Enumerated Values:

1	s1
2	s2
3	s1d5

.1.3.6.1.4.1.1966.12.1.5.2.1.7

portHdwFlowControl

Defines whether the data flow is handled by the
software (Soft), hardware (Hard), Both, or None.

Enumerationr/w

Enumerated Values:

1	none
2	soft
3	hard
4	both

.1.3.6.1.4.1.1966.12.1.5.2.1.8

portHdwMonitorDSR

Specifies whether the RS-232 signal DSR (Data Set Ready) should
be monitored, for Device Servers with a DTE serial interface.
On a Device Server with a DCE serial interface, this object
specifies whether the DTR (Data …

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.9

portHdwMonitorDCD

Specifies whether the RS-232 signal DCD (Data Carrier Detect) should
be monitored. This object does not apply to DCE serial interfaces.

This is used with modems or any other device that sends
a DCD signa…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.10

portHdwDuplex

Specify whether the line is Full Duplex (communication both ways
at the same time) or Half Duplex (communication in one direction
at a time).

Enumerationr/w

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.1966.12.1.5.2.1.11

portHdwTXDriverControl

Used with a EIA-485 serial interface, if your application supports
RTS (Request To Send), select this option. Otherwise, select Auto.
Default is Auto

Enumerationr/w

Enumerated Values:

1	auto
2	rts

.1.3.6.1.4.1.1966.12.1.5.2.1.12

portHdwEchoSuppression

This parameter applies only to EIA-485 Half Duplex mode. All characters
will be echoed to the user and transmitted across the serial ports.
Some EIA-485 applications require local echo to be enabled in order to
monitor …

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.13

portHdwUART

Enumeration

Enumerated Values:

1	scc
2	smc
3	exar

.1.3.6.1.4.1.1966.12.1.5.2.1.14

portHdwIRQ

Port Hardware IRQ

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.2.1.15

portHdwTxBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.16

portHdwRxBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.17

portHdwFrameErrs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.18

portHdwParityErrs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.19

portHdwBreaks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.20

portHdwOverruns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.5.2.1.21

portHdwRTS

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.22

portHdwCTS

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.23

portHdwDTR

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.24

portHdwDSR

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.25

portHdwCD

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.26

portHdwRI

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.27

portSoftTermination

Enables or disables software line termination.

portHdwDiscardCharactersRecievedWithErrors

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.29

portHdwCustomSpeed

The custom baud rate for this port.

Integer32r/w

Constraints:
range: 50-1843200

.1.3.6.1.4.1.1966.12.1.5.2.1.30

This option if set will discard any characters recieved on the
uart that have overrun, framing or parity errors. If not set,
then the characters are sent out the network connection

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.31

portHdwRtsToggle

This option if set will toggle RTS on before transmitting the
first character and toggle RTS off after transmitting the
last character.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.2.1.32

portHdwRtsInitialDelay

The delay, in msec, between turning RTS on and transmittng
the first character.

Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.1966.12.1.5.2.1.33

portHdwRtsFinalDelay

The delay, in msec, between transmitting the last character
and turning RTS off.

Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.1966.12.1.5.2.1.34

portTelnetTable

table

.1.3.6.1.4.1.1966.12.1.5.3 · 1 row entry · 15 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portTelnetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portTelnetTable'

Port Telnet Table.

portTelnetEntry row .1.3.6.1.4.1.1966.12.1.5.3.1

An entry in the portTelnetEntry, each relating to a port.

Indexes

portTelnetIndex

Column Syntax OID

portTelnetIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.3.1.1

portTelnetStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.3.1.2

portTelnetPort

The port number the target host is listening on for
incoming connections. Default is 23.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.3.1.3

portTelnetHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.3.1.4

portTelnetTermType

Type of terminal attached to this line; for example, ANSI or WYSE60.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.3.1.5

portTelnetEcho

Toggles between local echo of entered characters and suppressing
local echo. Local echo is used for normal processing, while suppressing
the echo is convenient for entering text that should not be displayed
on the scree…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.3.1.6

portTelnetMapnl

Maps carriage returns (CR) to carriage return line feed (CRLF).
The default value is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.3.1.7

portTelnetMode

When On, keyboard input is not sent to the remote host until
Enter is pressed, otherwise input is sent every time a key
is pressed. Default is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.3.1.8

portTelnetInterrupt

Defines the interrupt character. Typing the interrupt
character interrupts the current process. This value is in
hexadecimal with a default value of 3 (ASCII value ^C).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.9

portTelnetQuit

Defines the quit character. Typing the quit character closes
and exits the current telnet session. This value is in
hexadecimal with a default value of 1c (ASCII value FS).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.10

portTelnetEOF

Defines the end-of-file character. When Line Mode is On,
entering the eof character as the first character on a line
sends the character to the remote host. This value is in hexadecimal
with a default value of 4 (ASCII …

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.11

portTelnetErase

Defines the erase character. When Line Mode is Off, typing the erase
character erases one character. This value is in hexadecimal with a
default value of 8 (ASCII value ^H).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.12

portTelnetEchoCC

Defines the echo character. When Line Mode is On, typing the echo
character echoes the text locally and sends only completed lines to
the host. This value is in hexadecimal with a default value of 5
(ASCII value ^E).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.13

portTelnetBreak

Defines the escape character. Returns you to the command line mode.
This value is in hexadecimal with a default value of 1d (ASCII value GS).

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.3.1.14

portTelnetTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.3.1.15

portSSHTable

table

.1.3.6.1.4.1.1966.12.1.5.4 · 1 row entry · 24 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portSSHTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portSSHTable'

Port SSH Table.

portSSHEntry row .1.3.6.1.4.1.1966.12.1.5.4.1

An entry in the portSSHEntry, each relating to a port.

Indexes

portSSHIndex

Column Syntax OID

portSSHIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.4.1.1

portSSHStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.4.1.2

portSSHPort

The port number the target host is listening on
for incoming connections. The default is port 22.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.4.1.3

portSSHHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.4.1.4

portSSHTermType

The type of terminal that will connecting via SSH.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.4.1.5

portSSHVerbose

Displays debug messages on the terminal.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.6

portSSHCompression

Requests compression of all data. Compression is desirable
on modem lines and other slow connections, but will only
slow down things on fast networks

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.7

portSSHAutoLogin

Creates an automatic SSH login, using the Name and Password values.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.8

portSSHName

The name of the user logging into the SSH session.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.5.4.1.9

portSSHProtocol

Specify the SSH client version that will be used
for the SSH session.

Enumerationr/w

Enumerated Values:

1	ssh1
2	ssh2
3	sshBoth

.1.3.6.1.4.1.1966.12.1.5.4.1.10

portSSHRSA

An authentication method used by SSH version 1 and 2.
Use RSA authentication for the SSH session.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.11

portSSHDSA

An authentication method used by SSH version 2.
Use DSA authentication for the SSH session.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.12

portSSHKeyboard

The user types in a password for authentication.

portSSHStrictHostKeyChecking

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.13

portSSHCipherSSH1

Select the encryption method (cipher) that you
want to use for your SSH version 1 connection:
3DES or Blowfish

Enumerationr/w

Enumerated Values:

1	tripledes
2	blowfish

.1.3.6.1.4.1.1966.12.1.5.4.1.14

portSSHFirstSSH2Cipher

Enumerationr/w

Enumerated Values:

1	tripledes
2	blowfish
3	aes-cbc
4	cast
5	arcfour
6	aes-ctr
7	aes-gcm
8	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.15

portSSHSecondSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.16

portSSHThirdSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.17

portSSHFourthSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.18

portSSHFifthSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.19

portSSHTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.4.1.20

When set, the device server must have a host key loaded.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.4.1.21

portSSHSixthSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.22

portSSHSeventhSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.23

portSSHEighthSSH2Cipher

Enumerationr/w

Enumerated Values:

1	none
2	tripledes
3	blowfish
4	aes-cbc
5	cast
6	arcfour
7	aes-ctr
8	aes-gcm
9	chacha20-poly1305

.1.3.6.1.4.1.1966.12.1.5.4.1.24

portPPPTable

table

.1.3.6.1.4.1.1966.12.1.5.5 · 1 row entry · 36 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portPPPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portPPPTable'

Port PPP Table.

portPPPEntry row .1.3.6.1.4.1.1966.12.1.5.5.1

An entry in the portPPPEntry, each relating to a port.

Indexes

portPPPIndex

Column Syntax OID

portPPPIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.5.1.1

portPPPStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.5.1.2

portPPPLocalIpAddr

The IPv4 IP address of the Device Server end of the PPP
link. For routing to work, you must enter a local IP
address. Choose an address that is part of the same network
or subnetwork as the remote end; for example, if t…

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.5.5.1.3

portPPPRemoteIpAddr

The IPv4 IP address of the remote end of the PPP link. Choose an
address that is part of the same network or subnetwork as the
Device Server. If you set the PPP parameter IP Address Negotiation
to On, the Device Server …

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.5.5.1.4

portPPPSubnetBits

The number of bits in the subnet mask. For example, a subnet mask
of 255.255.0.0 has 16 subnet/prefix bits. If your user is
authenticated by RADIUS and the RADIUS parameter Framed-Netmask is
set in the RADIUS file, the …

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.5.5.1.5

portPPPIpV6LocalIpAddr

The local IPv6 interface identifier of the Device Server end of the
PPP link. For routing to work, you must enter a local IP address.
Choose an address that is part of the same network or subnetwork as
the remote end. D…

Ipv6InterfaceIdr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.5.1.6

portPPPIpV6RemoteIpAddr

The remote IPv6 interface identifier of the remote end of the PPP link.
Choose an address that is part of the same network or subnetwork as the
Device Server. If you set the PPP parameter IP Address Negotiation to On,
t…

Ipv6InterfaceIdr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.5.1.7

portPPPAccm

Specifies the ACCM (Asynchronous Control Character Map) characters that
should be escaped from the data stream. This is entered as a 32-bit
hexadecimal number with each bit specifying whether or not the corresponding
ch…

Hex32r/w

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.5.5.1.8

portPPPMru

The Maximum Receive Unit (MRU) parameter specifies the maximum size of PPP
packets that the Device Server's port will accept. Enter a value between
64 and 1500 bytes; for example, 512. The default value is 1500. If your…

Integer32r/w

Constraints:
range: 64-1500

.1.3.6.1.4.1.1966.12.1.5.5.1.9

portPPPSecurity

The type of authentication that will be done on the link: None, PAP, or CHAP.
The default is CHAP. You can use PAP or CHAP to authenticate a port or user
on the Device Server, from a remote location, or authenticate a r…

Enumerationr/w

Enumerated Values:

1	none
2	pap
3	chap

.1.3.6.1.4.1.1966.12.1.5.5.1.10

portPPPUser

Complete this field only if you have specified PAP or CHAP (security
protocols) in the Security field, and you wish to dedicate this line
to a single remote user, who will be authenticated by the Device Server,
or you a…

OctetStringr/w

Constraints:
range: 0-254

.1.3.6.1.4.1.1966.12.1.5.5.1.11

portPPPRemoteUser

Complete this field only if you have specified PAP or CHAP (security protocols)
in the Security field, and you wish to dedicate this line to a single remote
user, who will be authenticated by the Device Server, or you a…

OctetStringr/w

Constraints:
range: 0-254

.1.3.6.1.4.1.1966.12.1.5.5.1.12

portPPPACComp

This determines whether compression of the PPP Address and Control fields
take place on the link. The default is On. For most applications this should
be enabled.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.13

portPPPProtoComp

This determines whether compression of the PPP Protocol field takes
place on this link. The default is On.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.14

portPPPVJComp

This determines whether Van Jacobson Compression is used on this link.
The default is On. If your user is authenticated by the Device Server,
this VJ compression value will be overridden if you have set the User
Framed …

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.15

portPPPMagicNegotiation

Determines if a line is looping back. If enabled (On), random
numbers are sent on the link. The random numbers should be
different, unless the link loops back. The default is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.16

portPPPIPAddrNegotiation

Specifies whether or not IP address negotiation will take place.
IP address negotiation is where the Device Server allows the
remote end to specify its IP address. The default value is Off.
When On, the IP address speci…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.17

portPPPCRTimeout

The maximum time, in seconds, that LCP (Link Control Protocol)
will wait before it considers a configure request packet to have
been lost.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.1966.12.1.5.5.1.18

portPPPTRTimeout

The maximum time, in seconds, that LCP (Link Control Protocol)
will wait before it considers a terminate request packet to have
been lost.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.1966.12.1.5.5.1.19

portPPPCRRetry

The maximum number of times a configure request packet will
be sent before the link is terminated.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.5.1.20

portPPPTRRetry

The maximum number of times a terminate request packet will
be sent before the link is terminated.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.5.1.21

portPPPNakRetry

The maximum number of times a configure NAK packet will
be sent before the link is terminated.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.5.1.22

portPPPAuthTimeout

The timeout, in seconds, during which successful PAP or
CHAP authentication must take place (when PAP or CHAP is
turned On). If the timer expires before the remote end has
been authenticated successfully, the link will …

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.1966.12.1.5.5.1.23

portPPPRoamingCallback

A user can enter a telephone number that the Device Server
will use to callback him/her. This feature is particularly
useful for a mobile user. Roaming callback can only work when
the User Callback parameter is set to O…

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.24

portPPPChallengInterval

The interval, in seconds, for which the Device Server will
issue a CHAP re-challenge to the remote end. During CHAP
authentication, an initial CHAP challenge takes place, and
is unrelated to CHAP re-challenges. The init…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.5.1.25

portPPPRouting

Determines the routing mode (RIP, Routing Information Protocol)
used on the PPP interface as one of the following options:
None-Disables RIP over the PPP/SLIP interface.
Send-Sends RIP over the PPP/SLIP interface.
Liste…

Enumerationr/w

Enumerated Values:

1	none
2	send
3	listen
4	sendAndListen

.1.3.6.1.4.1.1966.12.1.5.5.1.26

portPPPDynamicDNSEnabled

Enable/disable dynamic DNS.

portPPPDynamicDNSHostname

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.5.1.27

Host name.

OctetStringr/w

Constraints:
range: 1-14

.1.3.6.1.4.1.1966.12.1.5.5.1.28

portPPPDynamicDNSUserName

user name.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.1966.12.1.5.5.1.29

portPPPDynamicDNSPassword

Password.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.1966.12.1.5.5.1.30

portPPPDynamicDNSStatusString

Dynamic DNS Status

OctetStringr/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.1966.12.1.5.5.1.31

portPPPMSDirectConnection

Set for Microsoft PPP connection working mode

Enumerationr/w

Enumerated Values:

1	disable
2	server
3	client

.1.3.6.1.4.1.1966.12.1.5.5.1.32

portPPPIPv6Prefix

You can optionally specify an IPv6 global network prefix
that the Device Server will advertise to the device at the
other end of the PPP link. Default: 0:0:0:0

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.5.1.33

portPPPIPv6PrefixBits

Specify the prefix bits for the IPv6 global network prefix.
Default is 64.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.5.5.1.34

portPPPEchoTimeout

The timeout, in seconds, to wait for an Echo reply.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.1966.12.1.5.5.1.35

portPPPEchoRetry

The maximum number of Echo reply timeouts before
the link is terminated.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.5.1.36

portSLIPTable

table

.1.3.6.1.4.1.1966.12.1.5.6 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portSLIPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portSLIPTable'

Port SLIP Table.

portSLIPEntry row .1.3.6.1.4.1.1966.12.1.5.6.1

An entry in the portSLIPEntry, each relating to a port.

Indexes

portSLIPIndex

Column Syntax OID

portSLIPIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.6.1.1

portSlipStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.6.1.2

portSLIPLocalIpAddress

The IPv4 address of the Device Server end of the SLIP
link. For routing to work you must enter an IP address
in this field. Choose an address that is part of the same
network or subnetwork as the remote end; for example…

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.5.6.1.3

portSLIPRemoteIpAddress

The IPv4 address of the remote end of the SLIP link. Choose
an address that is part of the same network or subnetwork as
the Device Server. If your user is authenticated by the Device
Server, this remote IP address will…

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.5.6.1.4

portSLIPSubnetBits

The number of bits in the subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
If your user is authenticated by RADIUS and the RADIUS
parameter Framed-Netmask is set in the RADIUS file, the
…

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.5.6.1.5

portSLIPMtu

The Maximum Transmission Unit (MTU) parameter restricts
the size of individual SLIP packets being sent by the
Device Server. Enter a value between 256 and 1006 bytes;
for example, 512. The default value is 256. If your …

Integer32r/w

Constraints:
range: 256-1006

.1.3.6.1.4.1.1966.12.1.5.6.1.6

portSLIPVJComp

This determines whether Van Jacobson compression is used
on this link; that is, whether you are using SLIP or
C-SLIP (compressed SLIP). The choices are On (C-SLIP) or
Off (SLIP). The default is On. C-SLIP greatly improv…

portUDPIndex portUDPEntryIndex

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.6.1.7

portSLIPRouting

Determines the routing mode (RIP, Routing Information Protocol)
used on the SLIP interface as one of the following options:
None-Disables RIP over the PPP/SLIP interface.
Send-Sends RIP over the PPP/SLIP interface.
List…

Enumerationr/w

Enumerated Values:

1	none
2	send
3	listen
4	sendAndListen

.1.3.6.1.4.1.1966.12.1.5.6.1.8

portUDPTable

table

.1.3.6.1.4.1.1966.12.1.5.7 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portUDPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portUDPTable'

Port UDP Table.

portUDPEntry row .1.3.6.1.4.1.1966.12.1.5.7.1

An entry in the portUDPEntry, each relating to a port.

Indexes

Column Syntax OID

portUDPIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.7.1.1

portUDPEntryIndex

portUDPNumber

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.5.7.1.2

portUDPStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.7.1.3

portUDPStartAddress

The first host IP address in the range of IP addresses
(for IPv4 or IPv6) that the Device Server will listen for
messages from and/or send messages to

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.7.1.4

portUDPEndAddress

The last host IP address in the range of IP addresses (for
IPv4, not required for IPv6) that the Device Server will listen
for messages from and/or send messages to.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.7.1.5

portUDPPort

The port that the Device Server will use to receive messages
from or relay messages to servers/hosts.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.7.1.6

portUDPDirection

The direction in which information is received or relayed:
None-UDP service not enabled.
In-LAN to serial.
Out-Serial to LAN.
Both-Messages are relayed both directions.

Enumerationr/w

Enumerated Values:

1	none
2	in
3	out
4	both

.1.3.6.1.4.1.1966.12.1.5.7.1.7

portUDPOption

when want UDP port be any port which only valid for lan to serial direction set this to 2,
others for auto lean UDP port and specific port set this to 1

Enumerationr/w

Enumerated Values:

1	specificOrAutoLearn
2	anyPort

.1.3.6.1.4.1.1966.12.1.5.7.1.8

portUDPTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.7.1.9

portVmodemTable

table

.1.3.6.1.4.1.1966.12.1.5.8 · 1 row entry · 16 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portVmodemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portVmodemTable'

Port Vmodem Table.

portVmodemEntry row .1.3.6.1.4.1.1966.12.1.5.8.1

An entry in the portVmodemEntry, each relating to a port.

Indexes

portVmodemIndex

Column Syntax OID

portVmodemIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.8.1.1

portVmodemStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.8.1.2

portVmodemHost

The target host name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.8.1.3

portVmodemPort

The port number the target host is listening on for messages.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.8.1.4

portVmodemSuccessString

String that is sent to the serial device when a connection
succeeds. If no string is entered, then the string CONNECT
will be sent with the connecting speed, for example CONNECT 9600.

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.1966.12.1.5.8.1.5

portVmodemFailureString

String that is sent to the serial device when a connection fails.
If no string is entered, then the string NO CARRIER will be sent.

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.1966.12.1.5.8.1.6

portVmodemSuppress

If set to No, connection success/failure indication strings are
sent to the connected device, otherwise these indications
are suppressed.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.8.1.7

portVmodemStyle

One of the following:
Verbose-Return codes (strings) are sent to the connected device.
Numeric-The following characters can be sent to the connected device:
1 Successfully Connected
2 Failed to Connect
4 Error

Enumerationr/w

Enumerated Values:

1	numeric
2	verbose

.1.3.6.1.4.1.1966.12.1.5.8.1.8

portVmodemResponseDelay

The vmodem delay to response, in milliseconds, default is 250.

Integer32r/w

Constraints:
range: 0-999

.1.3.6.1.4.1.1966.12.1.5.8.1.9

portVmodemEcho

If set to on, vmodem will echo input.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.8.1.10

portVmodemMode

In auto mode vmodem will automatically use the host and port make connection,
otherwise will wait for use input

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.1966.12.1.5.8.1.11

portVmodemDCD

Define the behavior of DCD

Enumerationr/w

Enumerated Values:

1	alwaysHigh
2	followConnection

.1.3.6.1.4.1.1966.12.1.5.8.1.12

portVmodemRTS

Define the behavior of signal RTS

Enumerationr/w

Enumerated Values:

1	alwaysHigh
4	representDCD
5	representRI

.1.3.6.1.4.1.1966.12.1.5.8.1.13

portVmodemDTR

Define the behavior of signal DTR

Enumerationr/w

Enumerated Values:

1	alwaysHigh
3	representDCD
4	representRI

.1.3.6.1.4.1.1966.12.1.5.8.1.14

portVmodemInitString

String that used as initial AT commands.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.8.1.15

portVmodemTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.8.1.16

portRawTable

table

.1.3.6.1.4.1.1966.12.1.5.9 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portRawTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portRawTable'

Port Raw Table.

portRawEntry row .1.3.6.1.4.1.1966.12.1.5.9.1

An entry in the portRawEntry, each relating to a port.

Indexes

portRawIndex

Column Syntax OID

portRawIndex

Index of the corresponding serial port.

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.9.1.1

portRawStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.9.1.2

portRawPort

The port number the target host is listening on for incoming connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.9.1.3

portRawHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.9.1.4

portRawTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.9.1.5

portBidirTable

table

.1.3.6.1.4.1.1966.12.1.5.10 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portBidirTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portBidirTable'

Port Bidir Table.

portBidirEntry row .1.3.6.1.4.1.1966.12.1.5.10.1

An entry in the portBidirEntry, each relating to a port.

Indexes

portBidirIndex

Column Syntax OID

portBidirIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.10.1.1

portBidirStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.10.1.2

portBidirPort

The port number the target host is listening on for incoming connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.10.1.3

portBidirHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.10.1.4

portBidirTunnelName

The name of the HTTP tunnel associated with this service's target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.10.1.5

portRloginTable

table

.1.3.6.1.4.1.1966.12.1.5.11 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portRloginTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portRloginTable'

Port Rlogin Table.

portRloginEntry row .1.3.6.1.4.1.1966.12.1.5.11.1

An entry in the portRloginEntry, each relating to a port.

Indexes

portRloginIndex

Column Syntax OID

portRloginIndex

Index of the corresponding serial port.

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.11.1.1

portRloginStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.11.1.2

portRloginHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.11.1.3

portRloginTermType

Type of terminal attached to this line; for
example, ANSI or WYSE60.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.11.1.4

portRloginTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.11.1.5

portEmailTable

table

.1.3.6.1.4.1.1966.12.1.5.12 · 1 row entry · 13 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portEmailTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portEmailTable'

Port Email Table.

portEmailEntry row .1.3.6.1.4.1.1966.12.1.5.12.1

An entry in the portEmailEntry, each relating to a port.

Indexes

portEmailIndex

Column Syntax OID

portEmailIndex

Index of the corresponding serial port.

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.12.1.1

portEmailStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.12.1.2

portEmailActive

Determines whether or not email notification
is turned on. Default is Off.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.3

portEmailLevel

Choose the event level that triggers an email notification:
Emergency, Alert, Critical, Error, Warning, Notice, Info, or
Debug. You are selecting the lowest notification level;
therefore, when you select Debug, you will…

Enumerationr/w

Enumerated Values:

1	emergency
2	alert
3	critical
4	error
5	warning
6	notice
7	informational
8	debug

.1.3.6.1.4.1.1966.12.1.5.12.1.5

portEmailTo

An email address or list of email addresses that will
receive the email notification.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.5.12.1.6

portEmailFrom

This field can contain an email address that might
identify the Device Server name or some other value.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.5.12.1.7

portEmailReply

The email address to whom all replies to the email
notification should go.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.5.12.1.9

portEmailSubject

A text string, which can contain spaces, that will
display in the Subject field of the email notification.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.1966.12.1.5.12.1.10

portEmailUseDefaultLevel

Inherit 'level' setting from the Server Email Alert.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.11

portEmailUseDefaultTo

Inherit 'to' setting from the Server Email Alert.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.12

portEmailUseDefaultFrom

Inherit 'from' setting from the Server Email Alert.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.13

portEmailUseDefaultReply

Inherit 'reply' setting from the Server Email Alert.

portEmailUseDefaultSubject

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.14

Inherit 'subject' setting from the Server Email Alert.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.12.1.15

portSSLTable

table

.1.3.6.1.4.1.1966.12.1.5.13 · 1 row entry · 14 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portSSLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portSSLTable'

Port SSL Table.

portSSLEntry row .1.3.6.1.4.1.1966.12.1.5.13.1

An entry in the portSSLEntry, each relating to a port.

Indexes

portSSLIndex

Column Syntax OID

portSSLIndex

port SSL Index

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.13.1.1

portSSLStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.13.1.2

portSSLEnabled

Enables/disables SSL.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.13.1.3

portSSLuseServer

Uses the SSL/TLS server configuration for the line.

portSSLVerifyPeerCertificate

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.13.1.4

portSSLVersion

Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection wil…

Enumerationr/w

Enumerated Values:

1	any
2	tlsv1
3	sslv3

.1.3.6.1.4.1.1966.12.1.5.13.1.5

portSSLType

Specify whether the Device Server will act as an
SSL/TLS client or server. The default is Client.

Enumerationr/w

Enumerated Values:

1	client
2	server

.1.3.6.1.4.1.1966.12.1.5.13.1.6

Enable this option when you want the Validation Criteria
to match the Peer Certificate for authentication to pass.
If you enable this option, you need to download an
SSL/TLS certificate authority (CA) list file to the…

portPacketForwardingIndex

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.13.1.7

portSSLCountry

A two character country code; for example, US.

OctetStringr/w

Constraints:
range: 0-2

.1.3.6.1.4.1.1966.12.1.5.13.1.8

portSSLStateProv

Up to a 128 character entry for the state/province;
for example, IL.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.5.13.1.9

portSSLLocality

Up to a 128 character entry for the location;
for example, a city.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.5.13.1.10

portSSLOrganisation

Up to a 64 character entry for the organization;
for example, Accounting.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.5.13.1.11

portSSLOrganisationUnit

Up to a 64 character entry for the unit in the
organization; for example, Payroll.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.5.13.1.12

portSSLCommonName

Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.5.13.1.13

portSSLEmail

Up to a 64 character entry for an email address;
for example, acct@anycompany.com.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.5.13.1.14

portPacketForwardingTable

table

.1.3.6.1.4.1.1966.12.1.5.14 · 1 row entry · 21 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portPacketForwardingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portPacketForwardingTable'

The port packet forwarding configuration table.

portPacketForwardingEntry row .1.3.6.1.4.1.1966.12.1.5.14.1

An entry in the port packet forwarding configuration table, each relating to a serial port.

Indexes

Column Syntax OID

portPacketForwardingIndex

Port Index

portPacketForwardingStatus

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.14.1.1

portPacketForwardingPacketSize

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.14.1.2

When the size of the packet equals this value the packet is
transmitted. 0 - Ignore option

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.1966.12.1.5.14.1.3

portPacketForwardingIdleTime

When the elapsed time between one character to another character
equals this value the packet is transmitted. 0 - Ignore option

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.14.1.4

portPacketForwardingForceTransmitTime

When the elapsed time from the 1st character received equals this
value the packet is transmitted. 0 - Ignore option.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.14.1.5

portPacketForwardingEnableSOF1

Enable/disable the start of frame 1.

portPacketForwardingEnableSOF2

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.6

portPacketForwardingSOF1

Any characters received before the start of frame is received will
be ignored.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.7

Enable/disable the start of frame 2. When this is enabled SOF1 must
enabled

portPacketForwardingStartFrameTransmit

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.8

portPacketForwardingSOF2

Any characters received before the start of frame is received will
be ignored.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.9

A flag to determine if we will transmit the start of frame character(s).

portPacketForwardingEnableEOF1

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.10

Enable/disable the end of frame 1.

portPacketForwardingEnableEOF2

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.11

portPacketForwardingEOF1

The frame will be transmitted after this character is received based on the
forwarding rule.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.12

Enable/disable the end of frame 2. When this is enabled EOF1 must
enabled

portPacketForwardingEnableEndTrigger1

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.13

portPacketForwardingEOF2

The frame will be transmitted after this character is received based on the
forwarding rule.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.14

Enable/disable the end of trigger 1.

portPacketForwardingEndTrigger1

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.15

When the end trigger is received the packet will transmitted based on the
forwarding rules.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.16

portPacketForwardingEnableEndTrigger2

Enable/disable the end of trigger 2. When this is enabled EOF1 must
enabled

portPacketForwardingEndTrigger2

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.14.1.17

When the end trigger is received the packet will transmitted based on the
forwarding rules.

Hex8r/w

Type Constraints:
range: 1

.1.3.6.1.4.1.1966.12.1.5.14.1.18

portPacketForwardingForwardingRule

Forwarding rules.

Enumerationr/w

Enumerated Values:

0	trigger
1	triggerplus1
2	triggerplus2
3	stripTrigger

.1.3.6.1.4.1.1966.12.1.5.14.1.19

portPacketForwardingPacketIdleTime

When in Packet Accumulation mode it used for packet idle time

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.14.1.20

portPacketForwardingForwardMode

Forwarding Mode.

Enumerationr/w

Enumerated Values:

0	forwardModeInvalid
1	optimizeEthernetTrafic
2	minimizeLatency
3	messageAccumulation
4	custom

.1.3.6.1.4.1.1966.12.1.5.14.1.21

portTunnelTable

table

.1.3.6.1.4.1.1966.12.1.5.15 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portTunnelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portTunnelTable'

Port Tunnel Table.

portTunnelEntry row .1.3.6.1.4.1.1966.12.1.5.15.1

An entry in the portTunnelEntry, each relating to a port.

Indexes

portTunnelIndex

Column Syntax OID

portTunnelIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.15.1.1

portTunnelStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.15.1.2

portTunnelPort

The port number the target host is listening on for incoming connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.15.1.3

portTunnelHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.15.1.4

portTunnelHttpTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.15.1.5

portMODBUSSlaveTable

table

.1.3.6.1.4.1.1966.12.1.5.16 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portMODBUSSlaveTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portMODBUSSlaveTable'

Port Modbus Slave Table.

portMODBUSSlaveEntry row .1.3.6.1.4.1.1966.12.1.5.16.1

An entry in the portMODBUSSlaveEntry, each relating to a port.

Indexes

portMODBUSSlaveIndex

Column Syntax OID

portMODBUSSlaveIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.16.1.1

portMODBUSSlaveStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.16.1.2

portMODBUSSlaveMode

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumerationr/w

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.5.16.1.3

portMODBUSSlaveCRLF

Enable/disable appending CR/LF

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.16.1.4

portMODBUSSlaveUIDRange

The UID range for this entry.

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.1966.12.1.5.16.1.5

portMODBUSMasterTable

table

.1.3.6.1.4.1.1966.12.1.5.17 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portMODBUSMasterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portMODBUSMasterTable'

Port Modbus Master Table.

portMODBUSMasterEntry row .1.3.6.1.4.1.1966.12.1.5.17.1

An entry in the portMODBUSMasterEntry, each relating to a port.

Indexes

portMODBUSMasterIndex

Column Syntax OID

portMODBUSMasterIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.17.1.1

portMODBUSMasterStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.17.1.2

portMODBUSMasterMode

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumerationr/w

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.5.17.1.3

portMODBUSMasterCRLF

Enable/disable appending CR/LF

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.17.1.4

portCustomAppTable

table

.1.3.6.1.4.1.1966.12.1.5.18 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portCustomAppTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portCustomAppTable'

Port CustomApp Table.

portCustomAppEntry row .1.3.6.1.4.1.1966.12.1.5.18.1

An entry in the PortCustomAppEntry, each relating to a port.

Indexes

portCustomAppIndex

Column Syntax OID

portCustomAppIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.18.1.1

portCustomAppStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.18.1.2

portCustomAppCommand

The command line of the custom application.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.1966.12.1.5.18.1.3

portTrueportServiceTable

table

.1.3.6.1.4.1.1966.12.1.5.19 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portTrueportServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portTrueportServiceTable'

Port TrueportService Table.

portTrueportServiceEntry row .1.3.6.1.4.1.1966.12.1.5.19.1

An entry in the portTrueportServiceEntry, each relating to a port.

Indexes

portTrueportServiceIndex

Column Syntax OID

portTrueportServiceIndex

The index of the corresponding serial port.

portTrueportServiceStatus

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.19.1.1

portTrueportServiceClientInitiated

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.19.1.2

portTrueportServicePort

The port number the target host is listening on for incoming connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.19.1.3

portTrueportServiceHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.19.1.4

Specifies whether or not the network connection is initiated
by the client

portTrueportServiceActiveSignal

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.19.1.5

When the line becomes active, this option has the following impact:
o Lite Mode-When enabled, the EIA-232 signals remain high (active)
before, during, and after the session. When disabled, the
EIA-232 signals rema…

portTrueportServiceTunnelName

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.19.1.6

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.19.1.7

portPowerManagementTable

table

.1.3.6.1.4.1.1966.12.1.5.20 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portPowerManagementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portPowerManagementTable'

Port Power Management Table.

portPowerManagementEntry row .1.3.6.1.4.1.1966.12.1.5.20.1

An entry in the portPowerManagementEntry, each relating to a port.

Indexes

portPowerManagementIndex

Column Syntax OID

portPowerManagementIndex

portPowerManagementStatus

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.20.1.1

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.20.1.2

portPowerManagementName

Power bar's name.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.1966.12.1.5.20.1.3

portPowerManagementModel

Power bar's model

Enumerationr/w

Enumerated Values:

1	rps820
2	rps830
3	rps1620
4	rps1630

.1.3.6.1.4.1.1966.12.1.5.20.1.4

portMultihostTable

table

.1.3.6.1.4.1.1966.12.1.5.21 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portMultihostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portMultihostTable'

Port Multihost Table.

portMultihostEntry row .1.3.6.1.4.1.1966.12.1.5.21.1

An entry in the portMultihostEntry, each relating to a port.

Indexes

portMultihostIndex

Column Syntax OID

portMultihostIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.21.1.1

portMultihostStatus

portMultihostPortIndex portMultihostOutboundIndex

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.21.1.2

portMultihostMode

Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode

Enumerationr/w

Enumerated Values:

1	all
2	backup

.1.3.6.1.4.1.1966.12.1.5.21.1.4

portMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.5.22 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portMultihostOutboundTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portMultihostOutboundTable'

Multihost outbound table.

portMultihostOutboundEntry row .1.3.6.1.4.1.1966.12.1.5.22.1

An entry in the portMultihostOutboundTable.

Indexes

Column Syntax OID

portMultihostPortIndex

The port number

portMultihostOutboundIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.22.1.1

The outbound entry number

portMultihostOutboundStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.5.22.1.2

portMultihostOutboundHostID

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.22.1.3

The host name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.22.1.4

portMultihostOutboundTcpPort

The host TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.22.1.5

portMultihostOutboundTunnel

The HTTP tunnel associated with this host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.22.1.6

portPowerManagementPlugTable

table

.1.3.6.1.4.1.1966.12.1.5.23 · 1 row entry · 15 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portPowerManagementPlugTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portPowerManagementPlugTable'

Power Management Plug Table.

portPowerManagementPlugEntry row .1.3.6.1.4.1.1966.12.1.5.23.1

An entry in the portPowerManagementPlugTable, each relating to a plug.

Indexes

portPowerManagementPortIndex portPowerManagementPlugIndex

Column Syntax OID

portPowerManagementPortIndex

The port number

portPowerManagementPlugIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.23.1.1

The plug number

portPowerManagementPlugStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.5.23.1.2

portPowerManagementPlugName

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.23.1.3

The plug's name.

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.1966.12.1.5.23.1.4

portPowerManagementPlugPowerUpInterval

The plug's power up delay.

Enumerationr/w

Enumerated Values:

1	puIntervalHalf
2	puInterval1
3	puInterval2
4	puInterval5
5	puInterval15
6	puInterval30
7	puInterval60
8	puInterval120
9	puInterval180
10	puInterval300

.1.3.6.1.4.1.1966.12.1.5.23.1.5

portPowerManagementPlugDefaultState

the plug's default state.

portPowerManagementDSLine

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.23.1.6

the DS line number which the device on this plug is connected to(0:none, >0:corresponding to the
line number.

PortNumberr/w

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.23.1.7

portPowerManagementMonitorHost

The name of a host to monitor. If the host fails to respond to pings,
this plug's power will be cycled. Set to a blank string to disable
this feature.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.23.1.8

portPowerManagementMonitorInterval

The time between pings, in minutes.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.23.1.9

portPowerManagementMonitorTimeout

The amount of time to wait after pings, in seconds.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.23.1.10

portPowerManagementMonitorRetries

The number of times to retry pings.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.23.1.11

portPowerManagementMonitorEnableDelay

Wait before cycling power, in the event of a monitor timeout.

portPowerManagementMonitorDelay

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.23.1.12

Amount of time to wait before cycling power, in the event of a monitor timeout.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.5.23.1.13

portPowerManagementMonitorEnableConsoleMsg

Display a message on the serial port, in the event of a monitor timeout,
when power cycle delay is enabled..

portPowerManagementMonitorEnableEmail

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.23.1.14

Send an email alert, in the event of a monitor timeout,
when power cycle delay is enabled..

portMODBUSMasterPortIndex portMODBUSMasterMappingIndex

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.5.23.1.15

portMODBUSMasterMappingTable

table

.1.3.6.1.4.1.1966.12.1.5.24 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portMODBUSMasterMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portMODBUSMasterMappingTable'

Modbus Master Slave Mapping.

portMODBUSMasterMappingEntry row .1.3.6.1.4.1.1966.12.1.5.24.1

An entry in the portMODBUSMasterMappingTable, each relating to a slave mapping.

Indexes

Column Syntax OID

portMODBUSMasterPortIndex

The port number

portMODBUSMasterMappingIndex

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.24.1.1

The mapping table index

portMODBUSMasterMappingStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.5.24.1.2

portMODBUSMasterMappingRemoteIP

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.24.1.3

The remote slave's IP address.

portMODBUSMasterMappingTransportType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.5.24.1.4

The remote slave's transport protocol type (TCP/UDP).

Enumerationr/w

Enumerated Values:

0	tcp
1	udp

.1.3.6.1.4.1.1966.12.1.5.24.1.5

portMODBUSMasterMappingPortNumber

the transport protocol layer port number (TCP/UDP).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.5.24.1.6

portMODBUSMasterMappingUIDStart

The start UID of the UID range for this entry.

Integer32r/w

Constraints:
range: 1-247

.1.3.6.1.4.1.1966.12.1.5.24.1.7

portMODBUSMasterMappingUIDEnd

The end UID of the UID range for this entry.

Integer32r/w

Constraints:
range: 1-247

.1.3.6.1.4.1.1966.12.1.5.24.1.8

portMODBUSMasterMappingUIDRangeMode

The UID-IP mapping mode.

Enumerationr/w

Enumerated Values:

0	host
1	gateway

.1.3.6.1.4.1.1966.12.1.5.24.1.9

portMODBUSMasterMappingTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.5.24.1.10

portSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.5.25 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk portSSLCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::portSSLCipherTable'

SSL CIpher.

portSSLCipherEntry row .1.3.6.1.4.1.1966.12.1.5.25.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

portSSLCipherIndex portSSLCipherPriority

Column Syntax OID

portSSLCipherIndex

The port number

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.5.25.1.1

portSSLCipherPriority

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.5.25.1.2

portSSLCipherStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.5.25.1.3

portSSLCipherEncryption

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.5.25.1.4

portSSLCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.5.25.1.5

portSSLCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.5.25.1.6

portSSLCipherKeyExchange

The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
E…

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.5.25.1.7

portSSLCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.5.25.1.8

modemInfoTable

table

.1.3.6.1.4.1.1966.12.1.6.1 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modemInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modemInfoTable'

The modem info table.

modemInfoEntry row .1.3.6.1.4.1.1966.12.1.6.1.1

An entry in the modemInfoTable, each relating to a host.

Indexes

modemIndex

Column Syntax OID

modemIndex

The table entry number for this modem

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.6.1.1.1

modemStatus

defUserPortAccessPortIndex

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.6.1.1.2

modemName

The modem name used for this modem entry. If blank, this entry
is currently unused.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.6.1.1.3

modemInitialisation

The modem Initialisation string

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.1966.12.1.6.1.1.4

defUserPortAccessTable

table

.1.3.6.1.4.1.1966.12.1.16.22 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk defUserPortAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::defUserPortAccessTable'

The port access info table for user.

defUserPortAccessEntry row .1.3.6.1.4.1.1966.12.1.16.22.1

An entry in the portAccessTable, each relating to a user's
access privileges for a serial port.

Indexes

Column Syntax OID

defUserPortAccessPortIndex

The port number that user access applies to.

Type Constraints:
range: 1..49

.1.3.6.1.4.1.1966.12.1.16.22.1.1

defUserPortAccessStatus

defUserPortRWAccessAllowed

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.16.22.1.2

Enable or disable the user's read write access to the port.

defUserPortRIAccessAllowed

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.16.22.1.3

Enable or disable the user's read input access to the port.

defUserPortROAccessAllowed

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.16.22.1.4

Enable or disable the user's read output access to the port.

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.16.22.1.5

snmpCommunityTable

table

.1.3.6.1.4.1.1966.12.1.17.6 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk snmpCommunityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::snmpCommunityTable'

snmpCommunityTable

snmpCommunityEntry row .1.3.6.1.4.1.1966.12.1.17.6.1

snmpCommunityEntry

Indexes

snmpCommunityIndex

Column Syntax OID

snmpCommunityIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.17.6.1.1

snmpCommunityStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.17.6.1.2

snmpCommunityName

A name that will be sent to the Device Server from an SNMP
manager. This name will define the permissions of the manager.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.17.6.1.3

snmpCommunityIpAddress

The IP address of the SNMP manager that will send requests to
the Device Server. If the address is 0.0.0.0, any SNMP manager
with the Community Name can access the Device Server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.17.6.1.4

snmpCommunityPermission

Permits the Device Server to respond to SNMP requests by:
None-There is no response to requests from SNMP.
Readonly-Responds only to Read requests from SNMP.
Readwrite-Responds to both Read and Write requests from SNMP.

Enumerationr/w

Enumerated Values:

1	none
2	readonly
3	readwrite

.1.3.6.1.4.1.1966.12.1.17.6.1.5

snmpTrapTable

table

.1.3.6.1.4.1.1966.12.1.17.7 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk snmpTrapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::snmpTrapTable'

snmpTrapTable

snmpTrapEntry row .1.3.6.1.4.1.1966.12.1.17.7.1

snmpTrapEntry

Indexes

snmpTrapIndex

Column Syntax OID

snmpTrapIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.17.7.1.1

snmpTrapStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.17.7.1.2

snmpTrapName

An arbitrary trap community name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.17.7.1.3

snmpTrapIpAddress

Defines the hosts (by IP address) that will receive
trap messages generated by the Device Server. Up to four
trap hosts can be defined.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.17.7.1.4

snmpTrapTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.17.7.1.5

snmpTrapVersion

Set trap version.

Enumerationr/w

Enumerated Values:

1	v1
2	v2c
3	v3

.1.3.6.1.4.1.1966.12.1.17.7.1.6

snmpTrapType

Set trap type. Inform is only valid for v2c or v3.

Enumerationr/w

Enumerated Values:

1	trap
2	inform

.1.3.6.1.4.1.1966.12.1.17.7.1.7

snmpTrapEnable

Set trap enabled.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.1966.12.1.17.7.1.8

dnsTable

table

.1.3.6.1.4.1.1966.12.1.18.1 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk dnsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::dnsTable'

dnsTable

dnsEntry row .1.3.6.1.4.1.1966.12.1.18.1.1

dnsEntry

Indexes

dnsIndex

Column Syntax OID

dnsIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.18.1.1.1

dnsStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.18.1.1.2

dnsIpAddress

You can specify the IP addresses for up to two DNS
(Domain Name Servers) hosts in your network. The first
DNS entry in the list is the primary DNS and the second
DNS entry is the secondary server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.18.1.1.3

dnsActive

Activates/deactivates a DNS entry.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.18.1.1.4

winsTable

table

.1.3.6.1.4.1.1966.12.1.19.1 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk winsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::winsTable'

winsTable

winsEntry row .1.3.6.1.4.1.1966.12.1.19.1.1

winsEntry

Indexes

winsIndex

Column Syntax OID

winsIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.19.1.1.1

winsStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.19.1.1.2

winsIpAddress

You can specify the IP addresses for up to two WINS
(Windows Internet Naming Service) hosts in your network.
The first WINS entry in the list is the primary WINS server
and the second WINS entry is the secondary server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.19.1.1.3

winsActive

Activates/deactivates a WINS entry.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.19.1.1.4

gatewayTable

table

.1.3.6.1.4.1.1966.12.1.20.1 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk gatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::gatewayTable'

gatewayTable

gatewayEntry row .1.3.6.1.4.1.1966.12.1.20.1.1

gatewayEntry

Indexes

gatewayIndex

Column Syntax OID

gatewayIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.20.1.1.1

gatewayStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.20.1.1.2

gatewayHost

You can specify up to twenty hosts to act as gateways
in your network. Each gateway host must be defined in
the Device Server host table.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.20.1.1.3

gatewayType

Specify the type of gateway:
Default-A gateway which provides general access beyond
your local network.
Host-A gateway reserved for accessing a specific host
external to your local network.
Network-A gateway r…

Enumerationr/w

Enumerated Values:

1	host
2	network
3	default

.1.3.6.1.4.1.1966.12.1.20.1.1.4

gatewayIpAddress

When the gateway is a Host or Network gateway, you must
specify the IP address of the target host machine/network.

ripKeysChainIndex ripKeysKeyIndex

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.20.1.1.5

gatewaySubnetBits

When the gateway is a Network gateway, you must specify the
subnet/prefix bits for that network. If the IP address is IPv4,
then the Subnet/Prefix Bits range is 0-32. If the IP address
is IPv6, then the Subnet/Prefix Bi…

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.20.1.1.6

gatewayInterface

The interface that the device server is going to use to access the
Remote Host. The list is comprised of the Ethernet interface(s)
and serial ports configured for the Remote Access (PPP) or
Remote Access (SLIP) profil…

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.20.1.1.7

ripKeysInfoTable

table

.1.3.6.1.4.1.1966.12.1.23.4 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ripKeysInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ripKeysInfoTable'

The RIP authentication keys info table.

ripKeysInfoEntry row .1.3.6.1.4.1.1966.12.1.23.4.1

An entry in the ripKeysInfoTable, each relating to a
RIP authentication key.

Indexes

Column Syntax OID

ripKeysChainIndex

The key chain index for this RIP authentication key.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.23.4.1.1

ripKeysKeyIndex

The key index in the chain for this RIP authentication key.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.23.4.1.2

ripKeyStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.23.4.1.3

ripKeyId

The key Id for this RIP authentication key.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1966.12.1.23.4.1.4

ripKeyStartDate

The starting date for which this
RIP authentication key becomes effective.
Format dd/mm/yyyy

Dater/w

Type Constraints:
range: 8..10

.1.3.6.1.4.1.1966.12.1.23.4.1.5

ripKeyStartTime

The starting time (local time) for which this
RIP authentication key becomes effective.
Format hh:mm:ss

Timer/w

Type Constraints:
range: 5..8

.1.3.6.1.4.1.1966.12.1.23.4.1.6

ripKeyEndDate

The end date , after which this
RIP authentication key is no longer in effect.

Dater/w

Type Constraints:
range: 8..10

.1.3.6.1.4.1.1966.12.1.23.4.1.7

ripKeyEndTime

The end time (local time), after which this
RIP authentication key is no longer in effect.

Timer/w

Type Constraints:
range: 5..8

.1.3.6.1.4.1.1966.12.1.23.4.1.8

ripInfoTable

table

.1.3.6.1.4.1.1966.12.1.28.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ripInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ripInfoTable'

The rip info table.

ripInfoEntry row .1.3.6.1.4.1.1966.12.1.28.1.1

An entry in the ripInfoTable, each relating to a rip entry.

Indexes

ripIndex

Column Syntax OID

ripIndex

The table entry number for this rip.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.28.1.1.1

ripTableIpAddr

ripIpAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.28.1.1.2

ripTableLastUpdate

Last Update in Seconds

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.28.1.1.3

ripTableVersion

Version

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.28.1.1.4

ripTableAuthType

Authentication Type

Enumeration

Enumerated Values:

1	noAuth
2	authData
3	password
4	md5

.1.3.6.1.4.1.1966.12.1.28.1.1.5

ripTableSequence

Sequence

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.28.1.1.6

ripTableBadPackets

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.28.1.1.7

ripTableBadRoutes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.28.1.1.8

tcpConnTable

table

.1.3.6.1.4.1.1966.12.1.29.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk tcpConnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::tcpConnTable'

tcpConnTable.

tcpConnEntry row .1.3.6.1.4.1.1966.12.1.29.1.1

An entry in the tcpConnTable

Indexes

tcpConnIndex

Column Syntax OID

tcpConnIndex

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.29.1.1.1

tcpConnLocalAddress

LocalAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.29.1.1.2

tcpConnLocalPort

LocalPort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.29.1.1.3

tcpConnRemoteAddress

RemoteAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.29.1.1.4

tcpConnRemotePort

RemotePort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.29.1.1.5

tcpConnTxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.29.1.1.6

tcpConnRxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.29.1.1.7

tcpConnState

State

Enumeration

Enumerated Values:

1	established
2	synSent
3	synRecv
4	finWait1
5	finWait2
6	timewait
7	close
8	closeWait
9	lastack
10	listen
11	closing

.1.3.6.1.4.1.1966.12.1.29.1.1.8

udpConnTable

table

.1.3.6.1.4.1.1966.12.1.30.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk udpConnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::udpConnTable'

udpConnTable

udpConnEntry row .1.3.6.1.4.1.1966.12.1.30.1.1

An entry in the udpConnTable

Indexes

udpConnIndex

Column Syntax OID

udpConnIndex

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.30.1.1.1

udpConnLocalAddress

LocalAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.30.1.1.2

udpConnLocalPort

LocalPort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.30.1.1.3

udpConnRemoteAddress

RemoteAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.30.1.1.4

udpConnRemotePort

RemotePort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.30.1.1.5

udpConnTxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.30.1.1.6

udpConnRxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.30.1.1.7

udpConnState

State

Enumeration

Enumerated Values:

1	established

.1.3.6.1.4.1.1966.12.1.30.1.1.8

tcpConnv6Table

table

.1.3.6.1.4.1.1966.12.1.34.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk tcpConnv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::tcpConnv6Table'

The rip info table.

tcpConnv6Entry row .1.3.6.1.4.1.1966.12.1.34.1.1

An entry in the tcpConnv6Table

Indexes

tcpConnv6Index

Column Syntax OID

tcpConnv6Index

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.34.1.1.1

tcpConnv6LocalAddress

LocalAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.34.1.1.2

tcpConnv6LocalPort

LocalPort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.34.1.1.3

tcpConnv6RemoteAddress

RemoteAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.34.1.1.4

tcpConnv6RemotePort

RemotePort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.34.1.1.5

tcpConnv6TxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.34.1.1.6

tcpConnv6RxQueueBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.34.1.1.7

tcpConnv6State

State

Enumeration

Enumerated Values:

1	established
2	synSent
3	synRecv
4	finWait1
5	finWait2
6	timeWait
7	close
8	closeWait
9	lastAck
10	listen
11	closing

.1.3.6.1.4.1.1966.12.1.34.1.1.8

udpConnv6Table

table

.1.3.6.1.4.1.1966.12.1.35.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk udpConnv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::udpConnv6Table'

udpConnv6Table

udpConnv6Entry row .1.3.6.1.4.1.1966.12.1.35.1.1

An entry in the udpConnv6Table

Indexes

udpConnv6Index

Column Syntax OID

udpConnv6Index

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.35.1.1.1

udpConnv6LocalAddress

LocalAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.35.1.1.2

udpConnv6LocalPort

LocalPort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.35.1.1.3

udpConnv6RemoteAddress

RemoteAddress

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.35.1.1.4

udpConnv6RemotePort

RemotePort

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.35.1.1.5

udpConnv6TxQueueBytes

TxQueue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.35.1.1.6

udpConnv6RxQueueBytes

RxQueue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.35.1.1.7

udpConnv6State

State

Enumeration

Enumerated Values:

1	established

.1.3.6.1.4.1.1966.12.1.35.1.1.8

routev6Table

table

.1.3.6.1.4.1.1966.12.1.36.1 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk routev6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::routev6Table'

The route IPv6 info table.

routev6Entry row .1.3.6.1.4.1.1966.12.1.36.1.1

An entry in the route IPv6 Table

Indexes

routev6Index

Column	Syntax	OID
routev6Index Index	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.36.1.1.1`
routev6Destination Destination	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1966.12.1.36.1.1.2`
routev6PrefixBits PrefixBits	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.1966.12.1.36.1.1.3`
routev6Gateway Gateway	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1966.12.1.36.1.1.4`
routev6Metric Metric	Integer32 Constraints: `range: 1-15`	`.1.3.6.1.4.1.1966.12.1.36.1.1.5`
routev6Flags Flags	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1966.12.1.36.1.1.6`
routev6Interface Interface	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1966.12.1.36.1.1.7`

ripv6InfoTable

table

.1.3.6.1.4.1.1966.12.1.37.1 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ripv6InfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ripv6InfoTable'

The ripv6 info table.

ripv6InfoEntry row .1.3.6.1.4.1.1966.12.1.37.1.1

An entry in the ripv6InfoTable, each relating to a ripv6 entry.

Indexes

ripv6Index

Column	Syntax	OID
ripv6Index The table entry number for this ripv6.	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.37.1.1.1`
ripv6TableIpAddr ripv6IpAddr	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.1966.12.1.37.1.1.2`
ripv6TableLastUpdate Last Update in Seconds	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.37.1.1.3`
ripv6TableBadPackets Last Update in Seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.37.1.1.4`
ripv6TableBadRoutes Last Update in Seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.37.1.1.5`

interfacev6InfoTable

table

.1.3.6.1.4.1.1966.12.1.38.1 · 1 row entry · 5 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk interfacev6InfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::interfacev6InfoTable'

The interface IPv6 info table.

interfacev6InfoEntry row .1.3.6.1.4.1.1966.12.1.38.1.1

An entry in the interface IPv6 table

Indexes

interfacev6Index

Column Syntax OID

interfacev6Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.38.1.1.1

interfacev6Name

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.38.1.1.2

interfacev6Address

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.38.1.1.3

interfacev6PrefixBits

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.38.1.1.4

interfacev6Scope

Enumeration

Enumerated Values:

1	global
2	host
3	link
4	site
5	compatv4
6	unknown

.1.3.6.1.4.1.1966.12.1.38.1.1.5

sslCipherTable

table

.1.3.6.1.4.1.1966.12.1.39.12 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk sslCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::sslCipherTable'

SSL CIpher.

sslCipherEntry row .1.3.6.1.4.1.1966.12.1.39.12.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

sslCipherPriority

Column Syntax OID

sslCipherPriority

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.39.12.1.1

sslCipherStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.39.12.1.2

sslCipherEncryption

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.39.12.1.3

sslCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.39.12.1.4

sslCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.39.12.1.5

sslCipherKeyExchange

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.39.12.1.6

sslCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.39.12.1.7

ethStatsInfoTable

table

.1.3.6.1.4.1.1966.12.1.41.1 · 1 row entry · 37 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ethStatsInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ethStatsInfoTable'

The Ethernet statistics table.

ethStatsInfoEntry row .1.3.6.1.4.1.1966.12.1.41.1.1

An entry in the Ethernet statistics table, each relating to an Ethernet interface.

Indexes

ethStatsIndex

Column Syntax OID

ethStatsIndex

The Ethernet interface number.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.41.1.1.1

ethStatsName

Displays Ethernet statistics.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.41.1.1.2

ethStatsMacAddress

Displays the MAC address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.1966.12.1.41.1.1.3

ethStatsStatus

Displays the Ethernet status:
1 is down and 2 is up.

Enumeration

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.1966.12.1.41.1.1.4

ethStatsBroadcast

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.5

ethStatsDebug

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.6

ethStatsLoopback

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.7

ethStatsPointtoPoint

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.8

ethStatsNoTrailers

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.9

ethStatsRunning

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.10

ethStatsNoArp

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.11

ethStatsPromiscuous

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.12

ethStatsRxMulticast

ethStatsMasterLoadBalancer

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.13

ethStatsSlaveLoadBalancer

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.14

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.15

ethStatsMulticast

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.16

ethStatsSetMedia

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.17

ethStatsAutoMedia

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.18

ethStatsDynamic

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.41.1.1.19

ethStatsLocalAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.41.1.1.20

ethStatsSubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.41.1.1.21

ethStatsBroadcastAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.41.1.1.22

ethStatsMtu

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.23

ethStatsTxQLen

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.24

ethStatsRxBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.25

ethStatsTxBytes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.26

ethStatsRxPackets

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.27

ethStatsTxPackets

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.28

ethStatsRxErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.29

ethStatsTxPktErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.30

ethStatsRxDroppedPkts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.31

ethStatsTxDroppedPkts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.32

ethStatsRxOverruns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.33

ethStatsTxOverruns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.34

ethStatsRxFrameErrs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.35

ethStatsTxCarrierErrs

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.36

ethStatsCollisions

modbusSlaveTCPStatsPortIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.41.1.1.37

modbusSlaveTCPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.1 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusSlaveTCPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusSlaveTCPStatsTable'

Modbus TCP Slave Statistics Table.

modbusSlaveTCPStatsEntry row .1.3.6.1.4.1.1966.12.1.43.1.1

An entry in the Modbus/TCP Slave statistics table, each relating to a serial port.

Indexes

Column Syntax OID

modbusSlaveTCPStatsPortIndex

modbusSlaveTCPStatsSerialMode

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.43.1.1.1

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumeration

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.43.1.1.2

modbusSlaveTCPStatsSerialFrameErrors

Modbus serial port frame errors

modbusMasterTCPStatsPortIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.43.1.1.3

modbusMasterTCPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.2 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusMasterTCPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusMasterTCPStatsTable'

Modbus TCP Master Statistics Table.

modbusMasterTCPStatsEntry row .1.3.6.1.4.1.1966.12.1.43.2.1

An entry in the Modbus/TCP Master statistics table, each relating to a serial port.

Indexes

Column Syntax OID

modbusMasterTCPStatsPortIndex

modbusMasterTCPStatsSerialMode

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.43.2.1.1

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumeration

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.43.2.1.2

modbusMasterTCPStatsSerialFrameErrors

Modbus serial port frame errors

modbusSlaveUDPStatsPortIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.43.2.1.3

modbusSlaveUDPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.3 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusSlaveUDPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusSlaveUDPStatsTable'

Modbus UDP Slave Statistics Table.

modbusSlaveUDPStatsEntry row .1.3.6.1.4.1.1966.12.1.43.3.1

An entry in the Modbus/UDP Slave statistics table, each relating to a serial port.

Indexes

Column Syntax OID

modbusSlaveUDPStatsPortIndex

modbusSlaveUDPStatsSerialMode

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.43.3.1.1

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumeration

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.43.3.1.2

modbusSlaveUDPStatsSerialFrameErrors

Modbus serial port frame errors

modbusMasterUDPStatsPortIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.43.3.1.3

modbusMasterUDPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.4 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusMasterUDPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusMasterUDPStatsTable'

Modbus UDP Master Statistics Table.

modbusMasterUDPStatsEntry row .1.3.6.1.4.1.1966.12.1.43.4.1

An entry in the Modbus/UDP Master statistics table, each relating to a serial port.

Indexes

Column Syntax OID

modbusMasterUDPStatsPortIndex

modbusMasterUDPStatsSerialMode

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.43.4.1.1

Modbus serial device's mode: 0: RTU; 1: ASCII.

Enumeration

Enumerated Values:

0	rtu
1	ascii

.1.3.6.1.4.1.1966.12.1.43.4.1.2

modbusMasterUDPStatsSerialFrameErrors

Modbus serial port frame errors

modbusSlaveTCPStatsGatewayPortIndex modbusSlaveTCPStatsGatewayUIDIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1966.12.1.43.4.1.3

modbusSlaveTCPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.6 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusSlaveTCPStatsGatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusSlaveTCPStatsGatewayTable'

Modbus TCP Slave Gateway Statistics Table.

modbusSlaveTCPStatsGatewayEntry row .1.3.6.1.4.1.1966.12.1.43.6.1

An entry in the modbusStatsGatewayTable.

Indexes

Column	Syntax	OID
modbusSlaveTCPStatsGatewayPortIndex The port number index	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.43.6.1.1`
modbusSlaveTCPStatsGatewayUIDIndex The UID index	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.6.1.2`
modbusSlaveTCPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.1966.12.1.43.6.1.3`
modbusSlaveTCPStatsGatewayUID The UID.	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.6.1.4`
modbusSlaveTCPStatsGatewayRemotePortNumber The remote TCP/UDP port number.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1966.12.1.43.6.1.5`
modbusSlaveTCPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.6.1.6`
modbusSlaveTCPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.6.1.7`
modbusSlaveTCPStatsGatewayExceptions the exceptions count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.6.1.8`
modbusSlaveTCPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.6.1.9`

modbusMasterTCPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.7 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusMasterTCPStatsGatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusMasterTCPStatsGatewayTable'

Modbus Master TCP Gateway Statistics Table.

modbusMasterTCPStatsGatewayEntry row .1.3.6.1.4.1.1966.12.1.43.7.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusMasterTCPStatsGatewayPortIndex modbusMasterTCPStatsGatewayUIDIndex

Column	Syntax	OID
modbusMasterTCPStatsGatewayPortIndex The port number index	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.43.7.1.1`
modbusMasterTCPStatsGatewayUIDIndex The UID index	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.7.1.2`
modbusMasterTCPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.1966.12.1.43.7.1.3`
modbusMasterTCPStatsGatewayUID The UID.	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.7.1.4`
modbusMasterTCPStatsGatewayRemotePortNumber the remote TCP/UDP port number.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1966.12.1.43.7.1.5`
modbusMasterTCPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.7.1.6`
modbusMasterTCPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.7.1.7`
modbusMasterTCPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.7.1.8`
modbusMasterTCPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.7.1.9`

modbusSlaveUDPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.8 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusSlaveUDPStatsGatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusSlaveUDPStatsGatewayTable'

Modbus UDP Slave Gateway Statistics Table.

modbusSlaveUDPStatsGatewayEntry row .1.3.6.1.4.1.1966.12.1.43.8.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusSlaveUDPStatsGatewayPortIndex modbusSlaveUDPStatsGatewayUIDIndex

Column	Syntax	OID
modbusSlaveUDPStatsGatewayPortIndex The port number index	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.43.8.1.1`
modbusSlaveUDPStatsGatewayUIDIndex The UID index	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.8.1.2`
modbusSlaveUDPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.1966.12.1.43.8.1.3`
modbusSlaveUDPStatsGatewayUID The UID.	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.8.1.4`
modbusSlaveUDPStatsGatewayRemotePortNumber the remote TCP/UDP port number.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1966.12.1.43.8.1.5`
modbusSlaveUDPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.8.1.6`
modbusSlaveUDPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.8.1.7`
modbusSlaveUDPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.8.1.8`
modbusSlaveUDPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.8.1.9`

modbusMasterUDPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.9 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk modbusMasterUDPStatsGatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::modbusMasterUDPStatsGatewayTable'

Modbus UDP Master Gateway Statistics Table.

modbusMasterUDPStatsGatewayEntry row .1.3.6.1.4.1.1966.12.1.43.9.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusMasterUDPStatsGatewayPortIndex modbusMasterUDPStatsGatewayUIDIndex

Column	Syntax	OID
modbusMasterUDPStatsGatewayPortIndex The port number index	GenericTableIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1966.12.1.43.9.1.1`
modbusMasterUDPStatsGatewayUIDIndex The UID index	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.9.1.2`
modbusMasterUDPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.1966.12.1.43.9.1.3`
modbusMasterUDPStatsGatewayUID The UID.	Integer32 Constraints: `range: 1-247`	`.1.3.6.1.4.1.1966.12.1.43.9.1.4`
modbusMasterUDPStatsGatewayRemotePortNumber The remote TCP/UDP port number.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1966.12.1.43.9.1.5`
modbusMasterUDPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.9.1.6`
modbusMasterUDPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.9.1.7`
modbusMasterUDPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.9.1.8`
modbusMasterUDPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1966.12.1.43.9.1.9`

ioUdpTable

table

.1.3.6.1.4.1.1966.12.1.45.1.5.3 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioUdpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioUdpTable'

Port UDP Table.

ioUdpEntry row .1.3.6.1.4.1.1966.12.1.45.1.5.3.1

An entry in the ioUdpEntry, each relating to a port.

Indexes

ioUdpEntryIndex

Column Syntax OID

ioUdpEntryIndex

ioUdpNumber

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.1

ioUdpEntryEnable

Enable/disable this UDP entry

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.2

ioUdpEntryStartAddress

The first host IP address in the range of IP addresses
(for IPv4 or IPv6) that the Device Server
send messages to

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.3

ioUdpEntryEndAddress

The last host IP address in the range of IP addresses (for
IPv4, not required for IPv6) that the Device Server will
send messages to.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.4

ioUdpEntryPort

The port that the Device Server will use to
relay messages to servers/hosts.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.5

ioUdpEntryTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.6

ioAnalogCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1 · 1 row entry · 11 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioAnalogCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioAnalogCfgTable'

ioAnalogCfgTable.

ioAnalogCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1

An entry in the ioAnalogCfgTable

Indexes

ioAnalogChannelIndex

Column Syntax OID

ioAnalogChannelIndex

I/O analog channel resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.1

ioAnalogCfgStatus

NOTE: This object also applies to the corresponding rows
in ioAnalogAlarmCfgTable. e.g. If changes are submitted
to row 1 of this table (i.e. channel 1), then changes will
also be submitted for all rows in ioAnalogAlar…

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.2

ioAnalogCfgEnable

Enable/disable this analog I/O resource

ioAnalogCfgAlarmClearMode

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.3

ioAnalogCfgDescription

Description for the I/O resource

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.4

ioAnalogCfgType

Analog I/O resource type. For current and voltage types, please
note that the corresponding hardware jumpers must be set
accordingly.

Enumerationr/w

Enumerated Values:

1	none
2	rtd
3	thermocouple
4	current
5	voltage

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.5

ioAnalogCfgRtdRange

Range for RTD analog I/O

Enumerationr/w

Enumerated Values:

1	pt100A385RangeMinus50to150
2	pt100A385Range0to100
3	pt100A385Range0to200
4	pt100A385Range0to400
5	pt100A385RangeMinus200to200
6	pt100A392RangeMinus50to150
7	pt100A392Range0to100
8	pt100A392Range0to200
9	pt100A392Range0to400
10	pt100A392RangeMinus200to200
11	pt1000A385RangeMinus40to160
12	nickelRangeMinus80to100
13	nickelRange0to100

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.6

ioAnalogCfgThermRange

Range for thermocouple analog I/O

Enumerationr/w

Enumerated Values:

1	j
2	k
3	t
4	e
5	r
6	s
7	b

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.7

ioAnalogCfgCurrentRange

Range for current-measuring analog I/O

Enumerationr/w

Enumerated Values:

1	ampsRange0to20
2	ampsRange4to20

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.8

ioAnalogCfgVoltageRange

Range for voltage-measuring analog I/O

Enumerationr/w

Enumerated Values:

1	voltsRangeMinus10To10
2	voltsRangeMinus5To5
3	voltsRangeMinus1To1
4	millivoltsRangeMinus500to500
5	millivoltsRangeMinus150to150

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.9

ioAnalogCfgAlarmTrigger

Analog I/O alarm trigger type

Enumerationr/w

Enumerated Values:

1	disabled
2	low
3	high

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.10

Analog I/O alarm clear mode

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.11

ioAnalogAlarmCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioAnalogAlarmCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioAnalogAlarmCfgTable'

ioAnalogAlarmCfgTable.

ioAnalogAlarmCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1

An entry in the ioAnalogAlarmCfgTable

Indexes

ioAnalogAlarmCfgChannelIndex ioAnalogAlarmCfgEntryIndex

Column Syntax OID

ioAnalogAlarmCfgChannelIndex

Channel Index

ioAnalogAlarmCfgEntryIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.1

Entry Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.2

ioAnalogCfgAlarmEnable

Enable/disable I/O analog alarm entry

ioAnalogCfgAlarmTriggerLevel

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.3

Trigger level for I/O analog alarm (floating point value)

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.4

ioAnalogCfgAlarmClearLevel

Clear level for non-latching I/O analog alarm (floating point
value)

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.5

ioAnalogCfgAlarmEmail

Enable/disable email notification on triggered analog alarm

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.6

ioAnalogCfgAlarmSyslog

Enable/disable syslog notification on triggered analog alarm

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.7

ioAnalogCfgAlarmSNMP

Enable/disable SNMP trap notification on triggered analog alarm

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.8

ioDigitalCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1 · 1 row entry · 20 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalCfgTable'

ioDigitalCfgTable.

ioDigitalCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1

An entry in the ioDigitalCfgTable

Indexes

ioDigitalChannelIndex

Column Syntax OID

ioDigitalChannelIndex

I/O digital channel resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1

ioDigitalCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2

ioDigitalCfgResourceType

Set your digital I/O resource type to Input or Output
using this object. Please note that the corresponding
hardware jumpers must be set accordingly.

Enumerationr/w

Enumerated Values:

2	input
3	output

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3

ioDigitalCfgEnable

Enable/disable this digital I/O channel

ioDigitalInputCfgInvertSignal

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4

ioDigitalCfgDescription

Description for this digital I/O

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5

ioDigitalInputCfgLatch

Digital Input: Latch type

Enumerationr/w

Enumerated Values:

1	disabled
2	inactiveToActive
3	activeToInactive

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6

Digital Input: Enable/disable signal inversion

ioDigitalInputCfgAlarmTrigger

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7

Digital Input: Alarm trigger type

Enumerationr/w

Enumerated Values:

1	disabled
2	low
3	high

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8

ioDigitalInputCfgAlarmClear

Digital Input: Clear alarm - manual/automatic

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9

ioDigitalInputCfgAlarmEmail

Digital Input: Enable/disable email alert on triggered alarm

ioDigitalInputCfgAlarmSyslog

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10

Digital Input: Enable/disable syslog alert on triggered alarm

ioDigitalInputCfgAlarmSNMP

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11

Digital Input: Enable/disable SNMP trap on triggered alarm

ioDigitalOutputCfgPulseMode

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12

ioDigitalOutputCfgType

Digital Output: Output type

Enumerationr/w

Enumerated Values:

1	sink
2	source
3	sinkAndSource

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13

ioDigitalOutputCfgMode

Digital Output: Output mode

Enumerationr/w

Enumerated Values:

1	manual
2	pulse
3	inactiveToActiveDelay
4	activeToInactiveDelay

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14

Digital Output: Pulse mode (counted or continuous)

Enumerationr/w

Enumerated Values:

1	continuous
2	counted

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15

ioDigitalOutputCfgPulseCount

Digital Output: Pulse count (only applies to counted pulse mode)

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16

ioDigitalOutputCfgInactiveSignalWidth

Digital Output: Inactive signal width, in 100 ms units (only applies
to pulse mode)

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17

ioDigitalOutputCfgActiveSignalWidth

Digital Output: Active signal width, in 100 ms units (only applies
to pulse mode)

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18

ioDigitalOutputCfgDelay

Digital Output: Delay time, in 100 ms units (only applies to
delay mode)

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19

ioDigitalOutputCfgFailsafe

Digital Output: Failsafe action - choose the action that
will take place when the failsafe timer expires

Enumerationr/w

Enumerated Values:

1	none
2	activateOutput
3	deactivateOutput

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20

ioDigitalExtensionCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalExtensionCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalExtensionCfgTable'

I/O Digial Extention Table.

ioDigitalExtensionCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1

An entry in the ioDigitalExtensionCfgTable

Indexes

ioDigitalExtCfgChanIndex

Column Syntax OID

ioDigitalExtCfgChanIndex

I/O resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.1

ioDigitalExtCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.2

ioDigitalExtCfgEnable

Enable/disable this digital I/O Extension

ioDigitalExtCfgConnMethod

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.3

Defines the type of connection being established
Listen for connection, Connect to Host, or Local

Enumerationr/w

Enumerated Values:

0	listen
1	connect
2	local

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.4

ioDigitalExtCfgHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.5

ioDigitalExtCfgPort

The port number the target host is listening on for incoming/outgoing connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.6

ioDigitalExtCfgLinkChannel

The Link Channel that device would make a connection with. The link channel is only valid for Local
connection. The channel must be digital input

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.7

ioDigitalExtCfgKeepalive

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.8

ioDigitalExtCfgMultiHost

Allows user to configure the multihost for client/server initiated connections

ioDigitalExtCfgTunnelName

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.9

The name of the HTTP tunnel associated with the Rlogin service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.10

ioDigitalMultihostTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.3 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalMultihostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalMultihostTable'

I/O Digial Multihost Table.

ioDigitalMultihostEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1

An entry in the ioDigitalMultihostEntry, each relating to digital io channel.

Indexes

ioDigitalMultihostIndex

Column Syntax OID

ioDigitalMultihostIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.1

ioDigitalMultihostStatus

ioDigitalMultihostChanIndex ioDigitalMultihostOutboundIndex

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.2

ioDigitalMultihostMode

Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode

Enumerationr/w

Enumerated Values:

1	all
2	backup

.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.4

ioDigitalMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalMultihostOutboundTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalMultihostOutboundTable'

Multihost outbound table.

ioDigitalMultihostOutboundEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1

An entry in the ioDigitalMultihostOutboundTable.

Indexes

Column Syntax OID

ioDigitalMultihostChanIndex

Channel Index

ioDigitalMultihostOutboundIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.1

The outbound entry number

ioDigitalMultihostOutboundStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.2

ioDigitalMultihostOutboundHostID

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.3

The host name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.4

ioDigitalMultihostOutboundTcpPort

The host TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.5

ioDigitalMultihostOutboundTunnel

The HTTP tunnel associated with this host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.6

ioDigitalSSLTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5 · 1 row entry · 14 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalSSLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalSSLTable'

io SSL Table.

ioDigitalSSLEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1

An entry in the ioDigitalSSLEntry, each relating to a io.

Indexes

ioDigitalSSLIndex

Column Syntax OID

ioDigitalSSLIndex

io Digital SSL Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.1

ioDigitalSSLStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.2

ioDigitalSSLEnabled

Enables/disables SSL.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.3

ioDigitalSSLuseServer

Uses the SSL/TLS server configuration for the line.

ioDigitalSSLVerifyPeerCertificate

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.4

ioDigitalSSLVersion

Enumerationr/w

Enumerated Values:

1	any
2	tlsv1
3	sslv3

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.5

ioDigitalSSLType

Specify whether the Device Server will act as an
SSL/TLS client or server. The default is Client.

Enumerationr/w

Enumerated Values:

1	client
2	server

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.6

ioDigitalSSLOrganisationUnit

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.7

ioDigitalSSLCountry

A two character country code; for example, US.

OctetStringr/w

Constraints:
range: 0-2

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.8

ioDigitalSSLStateProv

Up to a 128 character entry for the state/province;
for example, IL.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.9

ioDigitalSSLLocality

Up to a 128 character entry for the location;
for example, a city.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.10

ioDigitalSSLOrganisation

Up to a 64 character entry for the organization;
for example, Accounting.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.11

Up to a 64 character entry for the unit in the
organization; for example, Payroll.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.12

ioDigitalSSLCommonName

Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.13

ioDigitalSSLEmail

Up to a 64 character entry for an email address;
for example, acct@anycompany.com.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.14

ioDigitalSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalSSLCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalSSLCipherTable'

Digital SSL Cipher.

ioDigitalSSLCipherEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioDigitalSSLChanIndex ioDigitalSSLCipherIndex

Column Syntax OID

ioDigitalSSLChanIndex

The io number

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.1

ioDigitalSSLCipherIndex

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.2

ioDigitalSSLCipherStatus

ioDigitalSSLCipherEncryption

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.3

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.4

ioDigitalSSLCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.5

ioDigitalSSLCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.6

ioDigitalSSLCipherKeyExchange

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.7

ioDigitalSSLCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.8

ioRelayCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1 · 1 row entry · 11 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelayCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelayCfgTable'

ioRelayCfgTable.

ioRelayCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1

An entry in the ioRelayCfgTable

Indexes

ioRelayChannelIndex

Column Syntax OID

ioRelayChannelIndex

I/O relay channel resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.1

ioRelayCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.2

ioRelayCfgEnable

Enable/disable this Relay I/O channel

ioRelayCfgInactiveSignalWidth

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.3

ioRelayCfgDescription

Description for this relay

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.4

ioRelayCfgMode

Relay output mode

Enumerationr/w

Enumerated Values:

1	manual
2	pulse
3	inactiveToActiveDelay
4	activeToInactiveDelay

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.5

ioRelayCfgPulseMode

Relay pulse mode (only applies when output mode is set to 'pulse'

Enumerationr/w

Enumerated Values:

1	continuous
2	counted

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.6

ioRelayCfgPulseCount

Relay pulse count; only applies for counted pulse mode

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.7

Relay inactive signal width in 100 ms units; only applies to pulse mode

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.8

ioRelayCfgActiveSignalWidth

Relay active signal width in 100 ms units; only applies to pulse mode

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.9

ioRelayCfgDelay

Relay pulse delay, in 100 ms units; only applies to delay mode

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.10

ioRelayCfgFailsafe

Action to take when the failsafe timer expires

Enumerationr/w

Enumerated Values:

1	none
2	activateOutput
3	deactivateOutput

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.11

ioRelayExtensionCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelayExtensionCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelayExtensionCfgTable'

ioRelayExtensionCfgTable

ioRelayExtensionCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1

An entry in the ioReleayExtensionCfgTable

Indexes

ioRelayExtCfgChanIndex

Column Syntax OID

ioRelayExtCfgChanIndex

I/O Relay channel resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.1

ioRelayExtCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.2

ioRelayExtCfgEnable

Enable/disable this digital I/O Extension

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.3

ioRelayExtCfgConnMethod

Defines the type of connection being established
Listen for connection, Connect to Host, or Local

Enumerationr/w

Enumerated Values:

0	listen
1	connect
2	local

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.4

ioRelayExtCfgHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.5

ioRelayExtCfgPort

The port number the target host is listening on for incoming/outgoing connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.6

ioRelayExtCfgLinkChannel

The Link Channel that device would make a connection with. The link channel is only valid for Local
connection. The channel must be digital input

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.7

ioRelayExtCfgKeepalive

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.8

ioRelayExtCfgMultiHost

Allows user to configure the multihost for client/server initiated connections

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.9

ioRelayExtCfgTunnelName

The name of the HTTP tunnel associated with the Rlogin service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.10

ioRelayMultihostTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.3 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelayMultihostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelayMultihostTable'

I/O Multihost Table.

ioRelayMultihostEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1

An entry in the ioRelayMultihostEntry, each relating to digital io channel.

Indexes

ioRelayMultihostIndex

Column Syntax OID

ioRelayMultihostIndex

ioRelayMultihostChanIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.1

ioRelayMultihostStatus

ioRelayMultihostChanIndex ioRelayMultihostOutboundIndex

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.2

ioRelayMultihostMode

Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode

Enumerationr/w

Enumerated Values:

1	all
2	backup

.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.4

ioRelayMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelayMultihostOutboundTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelayMultihostOutboundTable'

Multihost outbound table.

ioRelayMultihostOutboundEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1

An entry in the ioRelayMultihostOutboundTable.

Indexes

Column Syntax OID

ioRelayMultihostChanIndex

Channel Index

ioRelayMultihostOutboundIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.1

The outbound entry number

ioRelayMultihostOutboundStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.2

ioRelayMultihostOutboundHostID

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.3

The host name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.4

ioRelayMultihostOutboundTcpPort

The host TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.5

ioRelayMultihostOutboundTunnel

The HTTP tunnel associated with this host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.6

ioRelaySSLTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5 · 1 row entry · 14 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelaySSLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelaySSLTable'

io Relay SSL Table.

ioRelaySSLEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1

An entry in the ioRelaySSLEntry, each relating to a io.

Indexes

ioRelaySSLIndex

Column Syntax OID

ioRelaySSLIndex

io Relay SSL Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.1

ioRelaySSLStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.2

ioRelaySSLEnabled

Enables/disables SSL.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.3

ioRelaySSLuseServer

Uses the SSL/TLS server configuration for the line.

ioRelaySSLVerifyPeerCertificate

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.4

ioRelaySSLVersion

Enumerationr/w

Enumerated Values:

1	any
2	tlsv1
3	sslv3

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.5

ioRelaySSLType

Specify whether the Device Server will act as an
SSL/TLS client or server. The default is Client.

Enumerationr/w

Enumerated Values:

1	client
2	server

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.6

ioRelaySSLOrganisationUnit

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.7

ioRelaySSLCountry

A two character country code; for example, US.

OctetStringr/w

Constraints:
range: 0-2

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.8

ioRelaySSLStateProv

Up to a 128 character entry for the state/province;
for example, IL.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.9

ioRelaySSLLocality

Up to a 128 character entry for the location;
for example, a city.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.10

ioRelaySSLOrganisation

Up to a 64 character entry for the organization;
for example, Accounting.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.11

Up to a 64 character entry for the unit in the
organization; for example, Payroll.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.12

ioRelaySSLCommonName

Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.13

ioRelaySSLEmail

Up to a 64 character entry for an email address;
for example, acct@anycompany.com.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.14

ioRelaySSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelaySSLCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelaySSLCipherTable'

SSL CIpher.

ioRelaySSLCipherEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioRelaySSLChanIndex ioRelaySSLCipherIndex

Column Syntax OID

ioRelaySSLChanIndex

The io number

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.1

ioRelaySSLCipherIndex

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.2

ioRelaySSLCipherStatus

ioRelaySSLCipherEncryption

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.3

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.4

ioRelaySSLCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.5

ioRelaySSLCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.6

ioRelaySSLCipherKeyExchange

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.7

ioRelaySSLCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.8

ioLineSignalCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1 · 1 row entry · 14 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineSignalCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineSignalCfgTable'

ioLineSignalCfgTable.

ioLineSignalCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1

An entry in the ioLineSignalCfgTable

Indexes

ioLineSignalCfgPortIndex ioLineSignalCfgSignalIndex

Column Syntax OID

ioLineSignalCfgPortIndex

Index of the associated serial port

ioLineSignalCfgSignalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.1

Index of the associate line signal

Enumeration

Enumerated Values:

1	dsr
2	dcd
3	cts
4	dtr
5	rts

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.2

ioLineSignalCfgStatus

ioLineSignalCfgResourceType

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.3

Signifies whether this resource is input or output

Enumeration

Enumerated Values:

2	input
3	output

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.4

ioLineSignalCfgEnable

Enable/disable this resource

ioLineSignalCfgDescription

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.5

Description for this resource

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.6

ioLineSignalInputCfgLatch

Line Signal (input): Latch mode

Enumerationr/w

Enumerated Values:

1	disabled
2	inactiveToActive
3	activeToInactive

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.7

ioLineSignalInputCfgInvertSignal

Line Signal (input): Enable/disable signal inversion

ioLineSignalInputCfgAlarmTrigger

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.8

Line Signal (input): Alarm trigger type

Enumerationr/w

Enumerated Values:

1	disabled
2	low
3	high

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.9

ioLineSignalInputCfgAlarmClear

Line Signal (input): Alarm clear type

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.10

ioLineSignalInputCfgAlarmEmail

Line Signal (input): Enable/disable email alert on alarm trigger

ioLineSignalInputCfgAlarmSyslog

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.11

Line Signal (input): Enable/disable syslog alert on alarm trigger

ioLineSignalInputCfgAlarmSNMP

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.12

Line Signal (input): Enable/disable SNMP alert on alarm trigger

ioLineSignalOutputCfgFailsafe

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.13

Line Signal (output): Action to take when failsafe timer expires

Enumerationr/w

Enumerated Values:

1	none
2	activateOutput
3	deactivateOutput

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.14

ioLineExtensionSigCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineExtensionSigCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineExtensionSigCfgTable'

ioLineExtensionSigCfgTable

ioLineExtensionSigCfgEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1

An entry in the ioLineExtensionCfgTable

Indexes

ioLineExtSigCfgChanIndex

Column Syntax OID

ioLineExtSigCfgChanIndex

I/O resource index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.1

ioLineExtSigCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.2

ioLineExtSigCfgEnable

Enable/disable this digital I/O Extension

ioLineExtSigCfgConnMethod

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.3

Defines the type of connection being established
Listen for connection, Connect to Host, or Local

Enumerationr/w

Enumerated Values:

0	listen
1	connect
2	local

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.4

ioLineExtSigCfgHost

The name of the target host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.5

ioLineExtSigCfgPort

The port number the target host is listening on for incoming/outgoing connections.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.6

ioLineExtSigCfgLinkChannel

The Link Channel that device would make a connection with. The link channel is only valid for Local
connection. The channel must be digital input

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.7

ioLineExtSigCfgKeepalive

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.8

ioLineExtSigCfgMultiHost

Allows user to configure the multihost for client/server initiated connections

ioLineExtSigCfgTunnelName

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.9

The name of the HTTP tunnel associated with the Rlogin service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.10

ioLineMultihostSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.3 · 1 row entry · 3 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineMultihostSigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineMultihostSigTable'

I/O Multihost Table.

ioLineMultihostSigEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1

An entry in the ioLineMultihostEntry, each relating to digital io channel.

Indexes

ioLineMultihostSigIndex

Column Syntax OID

ioLineMultihostSigIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.1

ioLineMultihostSigStatus

ioLineMultihostSigChanIndex ioLineMultihostOutboundSigIndex

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.2

ioLineMultihostModeSig

Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode

Enumerationr/w

Enumerated Values:

1	all
2	backup

.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.4

ioLineMultihostOutboundSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineMultihostOutboundSigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineMultihostOutboundSigTable'

Multihost outbound table.

ioLineMultihostOutboundSigEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1

An entry in the ioLineMultihostOutboundTable.

Indexes

Column Syntax OID

ioLineMultihostSigChanIndex

Channel Index

ioLineMultihostOutboundSigIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.1

The outbound entry number

ioLineMultihostOutboundSigStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.2

ioLineMultihostOutboundSigHostID

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.3

The host name.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.4

ioLineMultihostOutboundSigTcpPort

The host TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.5

ioLineMultihostOutboundSigTunnel

The HTTP tunnel associated with this host.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.6

ioLineSSLSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5 · 1 row entry · 14 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineSSLSigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineSSLSigTable'

io SSL Table.

ioLineSSLSigEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1

An entry in the ioDigitalSSLEntry, each relating to a io.

Indexes

ioLineSSLSigIndex

Column Syntax OID

ioLineSSLSigIndex

io SSL Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.1

ioLineSSLSigStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.2

ioLineSSLSigEnabled

Enables/disables SSL.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.3

ioLineSSLSiguseServer

Uses the SSL/TLS server configuration for the line.

ioLineSSLSigVerifyPeerCertificate

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.4

ioLineSSLSigVersion

Enumerationr/w

Enumerated Values:

1	any
2	tlsv1
3	sslv3

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.5

ioLineSSLSigType

Specify whether the Device Server will act as an
SSL/TLS client or server. The default is Client.

Enumerationr/w

Enumerated Values:

1	client
2	server

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.6

ioLineSSLSigOrganisationUnit

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.7

ioLineSSLSigCountry

A two character country code; for example, US.

OctetStringr/w

Constraints:
range: 0-2

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.8

ioLineSSLSigStateProv

Up to a 128 character entry for the state/province;
for example, IL.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.9

ioLineSSLSigLocality

Up to a 128 character entry for the location;
for example, a city.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.10

ioLineSSLSigOrganisation

Up to a 64 character entry for the organization;
for example, Accounting.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.11

Up to a 64 character entry for the unit in the
organization; for example, Payroll.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.12

ioLineSSLSigCommonName

Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.13

ioLineSSLSigEmail

Up to a 64 character entry for an email address;
for example, acct@anycompany.com.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.14

ioLineSSLSigCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineSSLSigCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineSSLSigCipherTable'

SSL CIpher.

ioLineSSLSigCipherEntry row .1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioLineSSLSigChanIndex ioLineSSLSigCipherIndex

Column Syntax OID

ioLineSSLSigChanIndex

The io number

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.1

ioLineSSLSigCipherIndex

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.2

ioLineSSLSigCipherStatus

ioLineSSLSigCipherEncryption

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.3

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.4

ioLineSSLSigCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.5

ioLineSSLSigCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.6

ioLineSSLSigCipherKeyExchange

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.7

ioLineSSLSigCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.8

ioAnalogStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioAnalogStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioAnalogStatusTable'

ioAnalogStatusTable.

ioAnalogStatusEntry row .1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1

An entry in the ioAnalogStatusTable

Indexes

ioAnalogStatusChannelIndex

Column Syntax OID

ioAnalogStatusChannelIndex

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.1

ioAnalogStatusEnabled

Enabled

ioAnalogStatusDescription

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.2

Description

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.3

ioAnalogFunction

kill - Apply configuration changes to this entry

Enumerationr/w

Enumerated Values:

1	none
2	kill
6	clearAlarm
7	clearMin
8	clearMax

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.4

ioAnalogStatusInputState

Input state.

Enumeration

Enumerated Values:

1	normal
2	open
3	short

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.5

ioAnalogStatusValue

Current analog input value.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.6

ioAnalogStatusMinimum

Minimum analog input value.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.7

ioAnalogStatusMaximum

Maximum analog input value.

ioDigitalStatusChannelIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.8

ioAnalogStatusAlarmLevel

Alarm level.

Integer32

Constraints:
range: 0-5

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.9

ioDigitalStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1 · 1 row entry · 9 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioDigitalStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioDigitalStatusTable'

ioDigitalStatusTable.

ioDigitalStatusEntry row .1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1

An entry in the ioDigitalStatusTable

Indexes

Column Syntax OID

ioDigitalStatusChannelIndex

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.1

ioDigitalStatusEnabled

Enabled

ioDigitalStatusDescription

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.2

Description

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.3

ioDigitalStatusType

Resource type

Enumeration

Enumerated Values:

1	unknown
2	input
3	output

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.4

ioDigitalFunction

kill - Apply configuration changes to this entry

Enumerationr/w

Enumerated Values:

1	none
2	kill
3	activateOutput
4	deactivateOutput
5	clearInputLatch
6	clearAlarmLatch

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.5

ioDigitalStatusState

Digital State. .

Enumerationr/w

Enumerated Values:

1	inactive
2	active

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.6

ioDigitalStatusLatchedInputState

For digital inputs only.

Enumeration

Enumerated Values:

1	none
2	inactiveToActive
3	activeToInactive

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.7

ioDigitalStatusInputAlarm

LineSignal State. .

Enumeration

Enumerated Values:

1	notTriggered
2	triggered

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.8

ioDigitalStatusExtensionState

For digital inputs and outputs only.

Enumeration

Enumerated Values:

1	disable
2	enabledDisconnected
3	connected
4	notAvailable

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.9

ioRelayStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioRelayStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioRelayStatusTable'

ioRelayStatusTable.

ioRelayStatusEntry row .1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1

An entry in the ioRelayStatusTable

Indexes

ioRelayStatusChannelIndex

Column Syntax OID

ioRelayStatusChannelIndex

Index

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.1

ioRelayStatusEnabled

Enabled

ioRelayStatusExtensionState

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.2

ioRelayStatusDescription

Description

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.3

ioRelayFunction

kill - Apply configuration changes to this entry

Enumerationr/w

Enumerated Values:

1	none
2	kill
3	activateOutput
4	deactivateOutput

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.4

ioRelayStatusState

Relay State. .

Enumerationr/w

Enumerated Values:

1	inactive
2	active

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.5

For digital inputs/outputs/relays only.

Enumeration

Enumerated Values:

1	disable
2	enabledDisconnected
3	connected
4	notAvailable

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.6

ioLineSignalStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ioLineSignalStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ioLineSignalStatusTable'

ioLineSignalStatusTable.

ioLineSignalStatusEntry row .1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1

An entry in the ioLineSignalStatusTable

Indexes

ioLineSignalStatusPortIndex ioLineSignalStatusSignalIndex

Column Syntax OID

ioLineSignalStatusPortIndex

Index

ioLineSignalStatusSignalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.1

Index

Enumeration

Enumerated Values:

1	dsr
2	dcd
3	cts
4	dtr
5	rts

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.2

ioLineSignalStatusEnabled

Enabled

ioLineSignalStatusDescription

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.3

Description

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.4

ioLineSignalStatusType

resource type

Enumeration

Enumerated Values:

1	unknown
2	input
3	output

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.5

ioLineSignalFunction

kill - Apply configuration changes to this entry

Enumerationr/w

Enumerated Values:

1	none
2	kill
3	activateOutput
4	deactivateOutput
5	clearInputLatch
6	clearAlarmLatch

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.6

ioLineSignalStatusState

LineSignal State. .

Enumerationr/w

Enumerated Values:

1	inactive
2	active

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.7

ioLineSignalStatusLatchedInputState

LineSignal State. .

Enumeration

Enumerated Values:

1	none
2	inactiveToActive
3	activeToInactive

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.8

ioLineSignalStatusInputAlarm

LineSignal State. .

Enumeration

Enumerated Values:

1	notTriggered
2	triggered

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.9

ioLineSignalStatusExtensionState

For serial inputs and outputs only.

Enumeration

Enumerated Values:

1	disable
2	enabledDisconnected
3	connected
4	notAvailable

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.10

clusteringTable

table

.1.3.6.1.4.1.1966.12.1.46.1 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk clusteringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::clusteringTable'

The Clustering table.

clusteringEntry row .1.3.6.1.4.1.1966.12.1.46.1.1

An entry in the clusteringEntry, each relating to a port.

Indexes

clusteringIndex

Column Syntax OID

clusteringIndex

The table entry number.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.46.1.1.1

clusteringStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.46.1.1.2

clusteringServerName

The slave server's name.

OctetStringr/w

Constraints:
range: 1-15

.1.3.6.1.4.1.1966.12.1.46.1.1.3

clusteringSlaveIP

The remote slave server's IP address.

dynamicDNSSSLCipherPriority

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.46.1.1.4

clusteringPort

The port number on the clustered slave server.

GenericTableIndexr/w

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.46.1.1.5

clusteringPortName

The slave server's port name.

OctetStringr/w

Constraints:
range: 1-54

.1.3.6.1.4.1.1966.12.1.46.1.1.6

clusteringSlavePort

The starting TCP port on the slave server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.1966.12.1.46.1.1.7

clusteringMasterPort

The starting TCP port on the master server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.1966.12.1.46.1.1.8

clusteringProtocol

The protocol used to connect between the slave and server.

Enumerationr/w

Enumerated Values:

1	telnet
2	ssh
3	notUsed

.1.3.6.1.4.1.1966.12.1.46.1.1.9

clusteringSlaveIPTunnel

The HTTP tunnel associated with the slave IP

OctetStringr/w

Constraints:
range: 1-14

.1.3.6.1.4.1.1966.12.1.46.1.1.10

dynamicDNSSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.47.18 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk dynamicDNSSSLCipherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::dynamicDNSSSLCipherTable'

SSL CIpher.

dynamicDNSSSLCipherEntry row .1.3.6.1.4.1.1966.12.1.47.18.1

An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry.

Indexes

Column Syntax OID

dynamicDNSSSLCipherPriority

The cipher priority. 1- highest 5 - lowest.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.1966.12.1.47.18.1.1

dynamicDNSSSLCipherStatus

dynamicDNSSSLCipherEncryption

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.47.18.1.2

SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any.

Enumerationr/w

Enumerated Values:

1	none
2	any
3	aes
4	tripledes
5	des
6	arctwo
7	arcfour

.1.3.6.1.4.1.1966.12.1.47.18.1.3

dynamicDNSSSLCipherKeySizeMin

The minimum key size value that will be used for
the specified encryption type. The default is 40.

Enumerationr/w

Enumerated Values:

1	min40
2	min56
3	min64
4	min128
5	min168
6	min256

.1.3.6.1.4.1.1966.12.1.47.18.1.4

dynamicDNSSSLCipherKeySizeMax

The maximum key size value that will be used for the
specified encryption type. The default is 256.

Enumerationr/w

Enumerated Values:

1	max40
2	max56
3	max64
4	max128
5	max168
6	max256

.1.3.6.1.4.1.1966.12.1.47.18.1.5

dynamicDNSSSLCipherKeyExchange

Enumerationr/w

Enumerated Values:

1	any
2	rsa
3	edhrsa
4	edhdss
5	adh

.1.3.6.1.4.1.1966.12.1.47.18.1.6

dynamicDNSSSLCipherHMAC

Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any.

Enumerationr/w

Enumerated Values:

1	any
2	sha
3	md5

.1.3.6.1.4.1.1966.12.1.47.18.1.7

vmodemPhoneInfoTable

table

.1.3.6.1.4.1.1966.12.1.49.1 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk vmodemPhoneInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::vmodemPhoneInfoTable'

The vmodem phone  info table.

vmodemPhoneInfoEntry row .1.3.6.1.4.1.1966.12.1.49.1.1

An entry in the vmodemPhoneInfoTable, each relating to a host.

Indexes

vmodemPhoneIndex

Column Syntax OID

vmodemPhoneIndex

The table entry number for this vmodem phone table

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.49.1.1.1

vmodemPhoneStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.49.1.1.2

vmodemPhone

The modem name used for this modem entry. If blank, this entry
is currently unused.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.1966.12.1.49.1.1.3

vmodemPhoneIP

The IP address corresponding to a phone number. If the IP address
is blank, then the Host IP address will be used

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.49.1.1.4

vmodemPhonePort

TCP port number corresponding to a phone number.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.49.1.1.5

vmodemPhoneTunnelName

The name of the HTTP tunnel associated with this service.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.49.1.1.6

vmodemPhoneHostName

The name of a configured host that will correspond to the phone
number.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.49.1.1.7

ipsecTable

table

.1.3.6.1.4.1.1966.12.1.50.1 · 1 row entry · 24 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ipsecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ipsecTable'

The IPsec table.

ipsecEntry row .1.3.6.1.4.1.1966.12.1.50.1.1

An entry in the ipsecEntry, each relating to a IPsec tunnel.

Indexes

ipsecIndex

Column Syntax OID

ipsecIndex

The table entry number for this IPsec tunnel.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.50.1.1.1

ipsecStatus

ipsecLocalExternalIpAddress

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.50.1.1.2

ipsecName

The IPsec tunnel name.
To delete an IPsec, set this field to blank.
If blank, this entry is currently unused.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.1966.12.1.50.1.1.3

ipsecAuthMethod

The type of authentication Method that the IPsec tunnel will use

Enumerationr/w

Enumerated Values:

0	sharedSecret
2	rsaSignature
3	x509Certificate

.1.3.6.1.4.1.1966.12.1.50.1.1.4

ipsecSecret

The IPsec tunnel secret. This applies to all IPsec and
and L2TP/IPsec tunnels

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.1966.12.1.50.1.1.5

ipsecLocalDevice

Define local device (the Device Server) either in left or right

Enumerationr/w

Enumerated Values:

1	left
2	right

.1.3.6.1.4.1.1966.12.1.50.1.1.6

ipsecBootaction

Select one of the boot action from: start, add or ignore.

Enumerationr/w

Enumerated Values:

1	start
2	add
3	ignore

.1.3.6.1.4.1.1966.12.1.50.1.1.7

ipsecLocalIpAddress

IPv4/IPv6 or FQDN(Fully Qualified Domain Name)

OctetStringr/w

Constraints:
range: 0-126

.1.3.6.1.4.1.1966.12.1.50.1.1.8

External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T through
a router/firewall. Only Available if Nat-T is on.

OctetStringr/w

Constraints:
range: 0-126

.1.3.6.1.4.1.1966.12.1.50.1.1.9

ipsecLocalNextHop

The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address.
Leave blank if using the default gateway configured in the IOLAN's->Network->Gateways settings.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.50.1.1.10

ipsecLocalHostNetwork

The network we are trying to create a VPN connection for. Leave blank when creating
a host to host VPN connection.

ipsecRemoteExternalIpAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.50.1.1.11

ipsecLocalNetmaskBit

If the local host/network address is IPv4,
then the Subnet/Prefix Bits range is 0-32. If the IP address
is IPv6, then the Subnet/Prefix Bits range is 0-128.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.50.1.1.12

ipsecRemoteIpAddress

IPv4/IPv6 or FQDN(Fully Qualified Domain Name)

OctetStringr/w

Constraints:
range: 0-126

.1.3.6.1.4.1.1966.12.1.50.1.1.13

External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T throught
a router/firewall. Only Available if Nat-T is on.

OctetStringr/w

Constraints:
range: 0-126

.1.3.6.1.4.1.1966.12.1.50.1.1.14

ipsecRemoteNextHop

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.50.1.1.15

ipsecRemoteHostNetwork

The host/network we are trying to create a VPN connection for. Leave blank when creating
a host to host VPN connection.

ipsecRemoteValCritCountry

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.50.1.1.16

ipsecRemoteNetmaskBit

If the remote host/network address is IPv4,
then the Subnet/Prefix Bits range is 0-32. If the IP address
is IPv6, then the Subnet/Prefix Bits range is 0-128.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.50.1.1.17

A two character country code; for example, US.

OctetStringr/w

Constraints:
range: 0-2

.1.3.6.1.4.1.1966.12.1.50.1.1.18

ipsecRemoteValCritStateProv

Up to a 128 character entry for the state/province;
for example, IL.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.50.1.1.19

ipsecRemoteValCritLocality

Up to a 128 character entry for the location;
for example, a city.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.50.1.1.20

ipsecRemoteValCritOrganisation

Up to a 64 character entry for the organization;
for example, Accounting.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.50.1.1.21

ipsecRemoteValCritOrganisationUnit

Up to a 64 character entry for the unit in the
organization; for example, Payroll.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.50.1.1.22

ipsecRemoteValCritCommonName

Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.1966.12.1.50.1.1.23

ipsecRemoteValCritEmail

Up to a 64 character entry for an email address;
for example, acct@anycompany.com.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.50.1.1.24

ipv6AddressEth1Table

table

.1.3.6.1.4.1.1966.12.1.51.2 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ipv6AddressEth1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ipv6AddressEth1Table'

Ethernet 1 IPv6 custom address table.

ipv6AddressEth1Entry row .1.3.6.1.4.1.1966.12.1.51.2.1

Ethernet 1 IPv6 custom entry.

Indexes

ipv6AddressEth1Index

Column Syntax OID

ipv6AddressEth1Index

Ethernet 1 custom IPv6 address index.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.51.2.1.1

ipv6AddressEth1Status

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.51.2.1.2

ipv6AddressEth1Addr

(Ethernet 1) Either enter a network prefix that the Device
Server will use to derive an IPv6 address using the Device
Server's MAC address (must turn ipv6AddressAuto1 on)
or enter a specific IPv6 address.

ipv6AddressEth1PrefixBits

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.51.2.1.3

(Ethernet 1) The IPv6 prefix bits of either the network or
IPv6 address.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.51.2.1.4

ipv6AddressEth1Auto

(Ethernet 1) When on, the Device Server will derive
an IPv6 address from the entered network prefix and the
Device Server's MAC address.

ipv6AddressEth1SendAdvertise

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.2.1.5

(Ethernet 1) When on, the Device Server will include
the IPv6 address in router advertisements.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.2.1.6

ipv6AddressEth2Table

table

.1.3.6.1.4.1.1966.12.1.51.3 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ipv6AddressEth2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ipv6AddressEth2Table'

Ethernet 2 IPv6 custom address table.

ipv6AddressEth2Entry row .1.3.6.1.4.1.1966.12.1.51.3.1

Ethernet 2 IPv6 custom entry.

Indexes

ipv6AddressEth2Index

Column Syntax OID

ipv6AddressEth2Index

Ethernet 2 custom IPv6 address index.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.51.3.1.1

ipv6AddressEth2Status

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.51.3.1.2

ipv6AddressEth2Addr

(Ethernet 2) Either enter a network prefix that the Device
Server will use to derive an IPv6 address using the Device
Server's MAC address or enter a specific IPv6 address.

ipv6AddressEth2PrefixBits

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.51.3.1.3

(Ethernet 2) The IPv6 prefix bits of either the network or
IPv6 address.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.51.3.1.4

ipv6AddressEth2Auto

(Ethernet 2) When on, the Device Server will derive
an IPv6 address from the entered network prefix and the
Device Server's MAC address.

ipv6AddressEth2SendAdvertise

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.3.1.5

(Ethernet 2) When on, the Device Server will include
the IPv6 address in router advertisements.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.3.1.6

ipv6AddressEth3Table

table

.1.3.6.1.4.1.1966.12.1.51.4 · 1 row entry · 6 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk ipv6AddressEth3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::ipv6AddressEth3Table'

Ethernet 3 IPv6 custom address table.

ipv6AddressEth3Entry row .1.3.6.1.4.1.1966.12.1.51.4.1

Ethernet 3 IPv6 custom entry.

Indexes

ipv6AddressEth3Index

Column Syntax OID

ipv6AddressEth3Index

Ethernet 3 custom IPv6 address index.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.51.4.1.1

ipv6AddressEth3Status

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.51.4.1.2

ipv6AddressEth2Addr

(Ethernet 2) Either enter a network prefix that the Device
Server will use to derive an IPv6 address using the Device
Server's MAC address or enter a specific IPv6 address.

ipv6AddressEth3PrefixBits

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.51.4.1.3

(Ethernet 3) The IPv6 prefix bits of either the network or
IPv6 address.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.51.4.1.4

ipv6AddressEth3Auto

(Ethernet 3) When on, the Device Server will derive
an IPv6 address from the entered network prefix and the
Device Server's MAC address.

ipv6AddressEth3SendAdvertise

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.4.1.5

(Ethernet 3) When on, the Device Server will include
the IPv6 address in router advertisements.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.51.4.1.6

vpnexceptionTable

table

.1.3.6.1.4.1.1966.12.1.53.1 · 1 row entry · 4 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk vpnexceptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::vpnexceptionTable'

vpnexceptionTable

vpnexceptionEntry row .1.3.6.1.4.1.1966.12.1.53.1.1

vpnexceptionEntry

Indexes

vpnexceptionIndex

Column Syntax OID

vpnexceptionIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.53.1.1.1

vpnexceptionStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.53.1.1.2

vpnexceptionIpAddress

The IPv4 or IPv6 address of the host or network that will communicate with
the Device Server outside of the VPN tunnel.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.53.1.1.3

vpnexceptionPrefixBits

The IPv4 subnet bits or IPv6 prefix bits for the network. 0-128.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.1966.12.1.53.1.1.4

httpTunTunnelCfgTable

table

.1.3.6.1.4.1.1966.12.1.54.1.1.1 · 1 row entry · 11 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk httpTunTunnelCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::httpTunTunnelCfgTable'

The httpTunTunnelCfg table.

httpTunTunnelCfgEntry row .1.3.6.1.4.1.1966.12.1.54.1.1.1.1

An entry in the httpTunTunnelCfgEntry, each relating to a tunnel.

Indexes

httpTunTunnelCfgIndex

Column Syntax OID

httpTunTunnelCfgIndex

The table entry number for this tunnel.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.1

httpTunTunnelCfgStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.2

httpTunTunnelCfgValid

Specifies whether this tunnel is valid or not.

httpTunTunnelCfgConnectHost

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.3

httpTunTunnelCfgName

The name of this tunnel. Tunnel names should be unique.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.4

httpTunTunnelCfgMode

Specifies whether this tunnel endpoint should listen or connect. A
functional HTTP tunnel consists of two endpoints: a listener and a connecter.

Enumerationr/w

Enumerated Values:

1	listen
2	connect

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.5

For tunnels in connect mode, specifies the remote host to
connect to.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.6

httpTunTunnelCfgConnectUseProxy

For tunnels in connect mode, specifies whether to use
an HTTP proxy.

httpTunTunnelCfgListenRestrictIp

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.7

For tunnels in listen mode, specifies whether to
restrict the other tunnel endpoint to a fixed IP address.
Use 0.0.0.0 for no restriction

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.8

httpTunTunnelCfgHttps

Specifies whether this tunnel should use HTTPS for communication.

httpTunTunnelCfgRestrictAccess

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.9

Specifies whether this tunnel should restrict access to local
connections.

httpTunConnectionCfgIndex

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.10

httpTunTunnelCfgSecret

Specifies the shared secret for this tunnel. If the shared secret
blank, the tunnel will be unauthenticated.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.11

httpTunConnectionCfgTable

table

.1.3.6.1.4.1.1966.12.1.54.1.2.1 · 1 row entry · 10 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk httpTunConnectionCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::httpTunConnectionCfgTable'

The httpTunConnectionCfg table.

httpTunConnectionCfgEntry row .1.3.6.1.4.1.1966.12.1.54.1.2.1.1

An entry in the httpTunConnectionCfgEntry, each relating to a Connection.

Indexes

Column Syntax OID

httpTunConnectionCfgIndex

The table entry number for this Connection.

httpTunConnectionCfgStatus

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.1

httpTunConnectionCfgValid

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.2

Specifies whether this Connection is valid or not.

httpTunConnectionCfgTunnelName

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.3

The name of the tunnel associated with this connection.

OctetStringr/w

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.4

httpTunConnectionCfgProtocol

The protocol used by this connection.

Enumerationr/w

Enumerated Values:

1	tcp
2	udp

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.5

httpTunConnectionCfgDestinationHost

The destination host for this connection. Application traffic tunneled in this
connection will be forwarded to this host.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.6

httpTunConnectionCfgDestinationPort

The destination port for this connection. Application traffic tunneled in this
connection will be forwarded to this TCP/UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.7

httpTunConnectionCfgLocalPort

The local listening port for this connection. Application that wish to use
this tunnel/connection should connect to this TCP/UDP port on the device server.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.8

httpTunConnectionCfgLocalIpAlias

(Optional) Specifies the local IP alias for this connection. If specified,
application who wish to use this tunnel/connection can connect to the local IP alias
and TCP/UDP port. This is useful when you want to create …

httpTunConnectionCfgRestrictAccess

Type Constraints:
range: 4

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.9

Specifies whether to restrict access to local application traffic only.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.10

httpTunTunnelStatsTable

table

.1.3.6.1.4.1.1966.12.1.54.2.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk httpTunTunnelStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::httpTunTunnelStatsTable'

The httpTunTunnelStats table.

httpTunTunnelStatsEntry row .1.3.6.1.4.1.1966.12.1.54.2.1.1.1

An entry in the httpTunTunnelStatsEntry, each relating to a tunnel.

Indexes

httpTunTunnelStatsIndex

Column Syntax OID

httpTunTunnelStatsIndex

The table entry number for this tunnel.

httpTunTunnelStatsConnectHost

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.1

httpTunTunnelStatsName

The name of this tunnel.

OctetString

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.2

httpTunTunnelStatsMode

Specifies whether this tunnel endpoint is listening or connecting.

Enumeration

Enumerated Values:

1	listen
2	connect

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.3

For tunnels in connect mode, specifies the remote host to
connect to.

OctetString

Constraints:
range: 0-50

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.4

httpTunTunnelStatsConnected

Specifies whether this tunnel is connected.

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.5

httpTunTunnelStatsHttps

Specifies whether this tunnel is using HTTPS for communication.

httpTunTunnelStatsAuthFailed

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.6

Specifies whether authentication failed for this tunnel.

httpTunConnectionStatsIndex

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.7

httpTunConnectionStatsTable

table

.1.3.6.1.4.1.1966.12.1.54.2.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk httpTunConnectionStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::httpTunConnectionStatsTable'

The httpTunConnectionStats table.

httpTunConnectionStatsEntry row .1.3.6.1.4.1.1966.12.1.54.2.2.1.1

An entry in the httpTunConnectionStatsEntry, each relating to a Connection.

Indexes

Column Syntax OID

httpTunConnectionStatsIndex

The table entry number for this connection.

httpTunConnectionStatsTunnelName

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.1

The name of the tunnel associated with this connection.

OctetString

Constraints:
range: 0-14

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.2

httpTunConnectionStatsType

The type of connection:
direct - Originating from this end of tunnel
reverse - Originating from other end of tunnel

Enumeration

Enumerated Values:

2	direct
3	reverse

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.3

httpTunConnectionStatsProtocol

The protocol used by this connection.

Enumeration

Enumerated Values:

1	tcp
2	udp

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.4

httpTunConnectionStatsDestinationIp

The destination IP for this connection.

Ipv4v6Address

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.5

httpTunConnectionStatsDestinationPort

The destination port for this connection.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.6

httpTunConnectionStatsSourceIp

The source (originating) IP for this connection.

Ipv4v6Address

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.7

httpTunConnectionStatsLocalPort

The local listening port for this connection.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.8

wlanProfileTable

table

.1.3.6.1.4.1.1966.12.1.56.1.2.1 · 1 row entry · 29 columns

Open in standard view

Uses the perle variant from /opt/observium/mibs/perle.

Command help

Walk wlanProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-IOLAN-SDS-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-IOLAN-SDS-MIB::wlanProfileTable'

The WLAN profile table.

wlanProfileEntry row .1.3.6.1.4.1.1966.12.1.56.1.2.1.1

An entry in the wlanProfileEntry, each relating to a WLAN profile.

Indexes

wlanProfileIndex

Column Syntax OID

wlanProfileIndex

The table entry number for this user.

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.1

wlanProfileStatus

Type Values:

1	active
2	modified
4	applyChanges
6	discardChanges

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.2

wlanProfileEnable

Only enabled profiles are considered for association with access points.

wlanProfileConnectPriority

Type Values:

1	no
2	yes

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.3

The connect priority which the IOLAN uses when attempting to connect to an access point.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.4

wlanProfileName

The name for this profile.
To delete the profile, set this field to blank.
If blank, this entry is currently unused.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.5

wlanProfileSsid

The SSID for this profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.6

wlanProfileScanBand

This profile is considered only if the access point is using the selected band.

bandBoth: either 2.4GHz or 5GHz bands
band2g4: 2.4GHz band
band5g: 5GHz band

Enumerationr/w

Enumerated Values:

1	bandBoth
2	band2g4
3	band5g

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.7

wlanProfileScanDfs

Enable/disable scanning of DFS channels.

Type Values:

1	off
2	on

.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.8

wlanProfileHiddenSsid

Specify whether the access point hides (Yes) or broadcasts (No) the SSID.