ppCfgMtaFeatureSwitch

MTA Feature Switch activates certain functionality and compliancies in the MTA.
          
hashBypass(1):   Disable cfg file Hash checking during provisioning sequence.
maxCPEBypass(2): MTA MAC address will not be entered in the CPE table
                 or counted against the MaxCpeAllowed variable.
mtaFilterBypass(4): MTA packets will not be filtered with CPE filtered packets.
proprietaryCoex(8): Enable the Arris proprietary version of MTA coexistence 
                    and notifications
kdcLoadBalancerSkip(16): Skips the IP check of the KDC load balancer IP forwarding 
                         feature.
usmUserCompareSkip(32): Skips the comparison of the Pcable USM User Name with User Name 
                        in received in a SNMPv3 packet.
snmpInformBypass(64): Skips the verification of the SNMP inform.
ifIndexShiftEnable(128): Shift to using endpoint indices 9&10 to 10&11.
pktcVersionSelector(256):  Used to select PacketCable 1.5 support.
mtaProvHaltNoTod(512):  Halt PacketCable Provisioning when no TOD server available.
diagLoopRingerTestLowWarning(2048): Enable the display of Low Warning result of 
                                     Linecard Loop Diags Ringer Test.
mtaSafeReset(4096): mta will not reset via snmpset pktcMtaDevResetNow until all the lines are in idle.
---------- Docsis3.0 ppCfgMtaFeatureSwitch Bit descriptions ----------
          
0x00000001 Disable cfg file Hash checking during provisioning sequence.
0x00000002 MTA MAC address will not be counted against the MaxCpeAllowed variable.
0x00000004 UNUSED
0x00000008 UNUSED
0x00000010 Skips the IP check of the KDC load balancer IP forwarding feature.
0x00000020 UNUSED
0x00000040 Skips the verification of the SNMP inform.
0x00000080 UNUSED
0x00000100 UNUSED
0x00000200 UNUSED
0x00000400 Do not strip leading '/' from the MTA config file name.
0x00000800 Report Warning if Loop Diags Ringer Test result is below minimum criteria.
0x00001000 mta will not be reset until all the lines are in idle.
0x80000000 Do not set this bit.  It is used to detect an invalid MTA Feature Switch setting. Some 
           provisioning servers pad the MTA Feature Switch value with leading 1's!
          
All other bits are unused.

MIB

PACKETPORT-MIB

OID

.1.3.6.1.4.1.4115.10.1.24

Type

scalar

Access

readwrite

Status

current

Parent

ppConfiguration