PACKETPORT-MIB Table View

This table is used to define the configurable data on a per port basis.

ppCfgPortEntry row .1.3.6.1.4.1.4115.10.1.1.1

An entry in the Configuration Port table.

Indexes

ppCfgPortPortNumber

Column	Syntax	OID
ppCfgPortPortNumber The unique value which identifies the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.10.1.1.1.1
ppCfgPortAdminState The administrative state of the line.	Enumeration Enumerated Values: 1 oos 2 is	.1.3.6.1.4.1.4115.10.1.1.1.2
ppCfgPortCallAgentName Call agent domain name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4115.10.1.1.1.3
ppCfgPortCallAgentIpAddressobsolete Call Agent IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4115.10.1.1.1.4
ppCfgPortProvSignalingProtobsolete The provisioned signaling protocol on the port.	SignalingProtocol Type Values: 0 none 1 ncs	.1.3.6.1.4.1.4115.10.1.1.1.5
ppCfgPortLoopCurrent This object provides the ability to set the loop current high or low.	Enumerationr/w Enumerated Values: 1 normal 2 high	.1.3.6.1.4.1.4115.10.1.1.1.6
ppCfgPortTparobsolete This object contains the maximum value of partial dial timeout in seconds.	Integer32 Constraints: range: 12-20	.1.3.6.1.4.1.4115.10.1.1.1.7
ppCfgPortTcritobsolete This object contains the maximum value of critical dial timeout in seconds.	Integer32 Constraints: range: 3-5	.1.3.6.1.4.1.4115.10.1.1.1.8
ppCfgPortBusyToneTimeOutobsolete Busy tone time out value.	Integer32 Constraints: range: 23-37	.1.3.6.1.4.1.4115.10.1.1.1.9
ppCfgPortDialToneTimeOutobsolete Dial tone time out value.	Integer32 Constraints: range: 12-20	.1.3.6.1.4.1.4115.10.1.1.1.10
ppCfgPortMsgWaitTimeOutobsolete Message waiting time out value.	Integer32 Constraints: range: 12-20	.1.3.6.1.4.1.4115.10.1.1.1.11
ppCfgPortOffHookWarnTimeOutobsolete Off hook warning time out value.	Integer32 Constraints: range: 0-60	.1.3.6.1.4.1.4115.10.1.1.1.12
ppCfgPortRingingTimeOutobsolete Ringing time out value.	Integer32 Constraints: range: 135-225	.1.3.6.1.4.1.4115.10.1.1.1.13
ppCfgPortRingBackTimeOutobsolete RingBack time out value.	Integer32 Constraints: range: 135-225	.1.3.6.1.4.1.4115.10.1.1.1.14
ppCfgPortReorderTimeOutobsolete Reorder time out value.	Integer32 Constraints: range: 23-37	.1.3.6.1.4.1.4115.10.1.1.1.15
ppCfgPortStutterDialToneTimeOutobsolete Stutter dial tone time out value	Integer32 Constraints: range: 12-20	.1.3.6.1.4.1.4115.10.1.1.1.16
ppCfgPortMaxWaitDelayobsolete This object contains the maximum number of seconds a MTA waits after a restart.	Integer32 Constraints: range: 450-750	.1.3.6.1.4.1.4115.10.1.1.1.17
ppCfgPortCallAgentUdpPort This object contains the call agent udp port that is being used for this instance of call signaling.	Integer32 Constraints: range: 1025-65535	.1.3.6.1.4.1.4115.10.1.1.1.18
ppCfgPortTxGainControl The gain control setting (dB) in the upstream, or A-to-D, direction. Setting this value for either line will take affect on ALL telephony lines.	Integer32r/w Constraints: range: -2-2	.1.3.6.1.4.1.4115.10.1.1.1.19
ppCfgPortRxGainControl The gain control setting (dB) in the downstream, or D-to-A, direction. Setting this value for either line will take affect on ALL telephony lines.	Integer32r/w Constraints: range: -2-2	.1.3.6.1.4.1.4115.10.1.1.1.20
ppCfgPortLocUserIndication Treatement/Tone applied in loss of communication (LOC) scenarios.	Enumerationr/w Enumerated Values: 0 silence 1 reorderTone	.1.3.6.1.4.1.4115.10.1.1.1.21
ppCfgPortPacketizationPeriodobsolete The per line packetization period for codec type.	millisecondsPacketizationPeriodType Type Values: 10 ten 20 twenty 30 thirty	.1.3.6.1.4.1.4115.10.1.1.1.22
ppCfgPortCodecobsolete The per line codec type gxxxx.	CodecType Type Values: 1 g711u 2 g711a 3 g7231 4 g729 5 g729a 6 g729e 7 g726 8 g728	.1.3.6.1.4.1.4115.10.1.1.1.23
ppCfgPortDialingMethoddeprecated Indicates the method used to dial the digits for this telephony endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2), dial-pulse signaling is used to dial the digits, Tone dialing(DTMF) is disabled. If Tone &…	Enumerationr/w Enumerated Values: 1 tone 2 pulse 3 toneAndPulse 4 pulseWithDTMFRelay 5 toneAndPulseWithDTMFRelay	.1.3.6.1.4.1.4115.10.1.1.1.24
ppCfgPortT38MaxDatagram Specifies the T38 Max Datagram size for incoming T38 packets. If this is used to allow larger incoming T38 packets then the Call Agent must allocate more bandwidth accordingly	Integer32r/w Constraints: range: 160-65535	.1.3.6.1.4.1.4115.10.1.1.1.25

This table is used to define the surveillance data on a per port basis.

ppSurvPortEntry row .1.3.6.1.4.1.4115.10.2.1.1

An entry in the Configuration Port table.

Indexes

ppSurvPortNumber

Column	Syntax	OID
ppSurvPortNumber The unique value which identifies the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.10.2.1.1.1
ppSurvPortMaintState The maintenance state of the line.	Enumeration Enumerated Values: 1 isnr 2 isnr-trafbsy 3 istrbl-mismatch 4 istrbl-fef 5 istrbl-tstf 6 istrbl-diag 7 istrbl-lcprt 8 oosnr-unprov 9 oosnr 10 oostrbl 11 oostrbl-tstf 12 oostrbl-diag 13 oostrbl-lcprt	.1.3.6.1.4.1.4115.10.2.1.1.2
ppSurvPortDigitMapobsolete The digit map set by the call agent.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4115.10.2.1.1.3
ppSurvPortLcDiagRequest Setting this value to true will send a diagnostics request on the line. Reading this value will always return false. The maintenance state of the line indicates if diagnostics are being run on the line.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4115.10.2.1.1.4
ppSurvPortDeprovRequest Setting this value to true will send a deprovisioning request on the line. Reading this value will always return false. The maintenance state of the line will indicate if the line is deprovisioned.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4115.10.2.1.1.5
ppSurvPortLcDiagLastResult The last result of diags for this line. If diagnostics are in progress it will return results pending.	Enumeration Enumerated Values: 1 diagnostics-passed 2 slac-revision-failure 3 mpi-failure 4 power-or-clock-failure 5 pcm-failure 6 standby-hook-failure 7 active-hook-failure 8 vf-failure 9 ringing-failure 10 invalid-state-to-init-diags 11 line-is-unprovisioned 12 diagnostics-results-pending	.1.3.6.1.4.1.4115.10.2.1.1.6

This table describes the codec capabilities
of the Packetport.

ppSurvMtaCodecCapEntry row .1.3.6.1.4.1.4115.10.2.2.1

An entry in the MTA codec capabilities table.

Indexes

ppSurvMtaCodecCapIndex

Column	Syntax	OID
ppSurvMtaCodecCapIndexobsolete The index for this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.10.2.2.1.1
ppSurvMtaCodecCapTypeobsolete A codec type supported by this device.	CodecType Type Values: 1 g711u 2 g711a 3 g7231 4 g729 5 g729a 6 g729e 7 g726 8 g728	.1.3.6.1.4.1.4115.10.2.2.1.2

A table of the signaling capabilities of the Packetport.

ppSurvMtaSigCapEntry row .1.3.6.1.4.1.4115.10.2.3.1

An entry in the signaling capabilities table.

Indexes

ppSurvMtaSigCapIndex

Column	Syntax	OID
ppSurvMtaSigCapIndexobsolete The index for this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4115.10.2.3.1.1
ppSurvMtaSigCapProtocolobsolete A signaling protocol this device supports.	SignalingProtocol Type Values: 0 none 1 ncs	.1.3.6.1.4.1.4115.10.2.3.1.2

This table allows control of the reporting of debug messages in 
the PacketPort device. For each system module (i.e. subsystem) 
of the device, a specific reporting level may be chosen.

ppSurvMtaDevDebugLevelControlEntry row .1.3.6.1.4.1.4115.10.2.18.1.1

Allows configuration of the reporting of debug messages for a
particular system module in the PacketPort device.

Indexes

ppSurvMtaDevDebugModule

Column	Syntax	OID
ppSurvMtaDevDebugModule The system module to which this entry applies.	Enumeration Enumerated Values: 1 generic 2 callP 3 dsp 4 lineCard 5 ppMtc 6 rtp	.1.3.6.1.4.1.4115.10.2.18.1.1.1
ppSurvMtaDevDebugReportingLevel Controls the level of debugging output for a particular system module.	PpDebugReportingLevelr/w Type Values: 0 off 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 8 level8 9 level9 10 level10	.1.3.6.1.4.1.4115.10.2.18.1.1.2