osSoamPmThrCrossingAlarm

An osSoamPmThrCrossingAlarm notification is sent if the 
following conditions are met for a particular type.
          
For an aboveAlarm five conditions need to be met:
          
a) measurement of the parameter is enabled via osSoamLmCfgMeasurementEnable
   for a LM crossing or osSoamDmCfgMeasurementEnable for a DM crossing; 
   and
          
b) the parameter threshold is configured in the osSoamPmLmThrPrflTable
   or osSoamDmThrCfgTable; and 
          
c) the threshold crossing type of bPmThrAboveAlarm is enabled; 
   and
          
d) the measured value of the parameter exceeds the value configured in
   the osSoamPmLmThrPrflTable for a LM crossing entry or
   osSoamDmThrCfgTable for a DM crossing entry for a type of
   bPmThrAboveAlarm; and
          
e) no previous osSoamPmThrCrossingAlarm notifications with type
   aboveAlarm have been sent relating to the same threshold in the
   osSoamPmLmThrPrflTable or osSoamDmThrCfgTable and the
   same parameter, during this measurement interval.
          
For a setAlarm five conditions need to be met:
          
a) measurement of the parameter is enabled via osSoamLmCfgMeasurementEnable
   for a LM crossing or osSoamDmCfgMeasurementEnable for a DM crossing; 
   and
          
b) the parameter threshold is configured in the osSoamPmLmThrPrflTable
   or osSoamDmThrCfgTable; and 
          
c) the threshold crossing type of bPmThrSetClearAlarm is enabled; 
   and
          
d) the measured value of the parameter exceeds the value configured in
   the osSoamPmLmThrPrflTable for a LM crossing entry or
   osSoamDmThrCfgTable for a DM crossing entry for a type of
   bPmThrSetClearAlarm for the measurement interval; and
          
e) the previous measured value did not 
   exceed the value configured in the osSoamPmLmThrPrflTable for
   a LM crossing entry or osSoamDmThrCfgTable for a DM crossing
   entry for a type of bPmThrSetClearAlarm.
          
For a clearAlarm five conditions need to be met:
          
a) measurement of the parameter is enabled via osSoamLmCfgMeasurementEnable
   for a LM crossing or osSoamDmCfgMeasurementEnable for a DM crossing; 
   and
          
b) the parameter threshold is configured in the osSoamPmLmThrPrflTable
   or osSoamDmThrCfgTable; and 
          
c) the threshold crossing type of bPmThrSetClearAlarm is enabled; 
   and
          
d) the measured value of the parameter did not exceed the value configured 
   in the osSoamPmLmThrPrflTable for a LM crossing entry or
   osSoamDmThrCfgTable for a DM crossing entry for a type of
   bPmThrSetClearAlarm for the measurement interval; and
          
e) the previous measured value did  
   exceed the value configured in the osSoamPmLmThrPrflTable for
   a LM crossing entry or osSoamDmThrCfgTable for a DM crossing
   entry for a type of bPmThrSetClearAlarm.
          
In the case of thresholds applied to a maximum or average measurement
counter, the previous measured value is the value of the counter at the
end of the preceding measurement interval.  In the case of thresholds
applied to the last measured value, it is the previous measured value.
          
The management entity that receives the notification can identify
the system from the network source address of the notification,
and can identify the LM or DM session reporting the threshold
crossing by the indices in the osSoamPmNotifObjThrId object,
including osEthServId, osEthServFlowId, and the osSoamLmCfgIndex or osSoamDmCfgIndex. 
          
An agent is not to generate more than one osSoamLmThrCrossingAlarm
'notification-event' of a given type per LM or DM session as specified
by osSoamPmNotifCfgAlarmInt. A 'notification-event' is the
transmission of a single notification to a list of notification
destinations.
          
If additional threshold crossing events occur within the 
osSoamPmNotifCfgAlarmInt period, then notification 
generation for these changes are suppressed by the agent until 
the current alarm interval expires. At the end of an alarm interval 
period, one notification-event is generated if any threshold
crossing events occurred since the start of the alarm interval period. 
In such a case, another alarm interval period is started right away.

MIB

OS-PROV-SOAM-PM-MIB

OID

.1.3.6.1.4.1.6926.2.10.33.0.4

Type

notification

Status

current

Parent

osSoamPmNotifs

Groups

1