OS-PROV-SOAM-PM-MIB Table View

This table is an extension of the osEthServFlowTable and rows
are automatically added or deleted from this table based upon row
creation and destruction of the osEthServFlowTable. 
          
This table represents the local Flow PM configuration table. The
primary purpose of this table is provide local parameters for the 
SOAM PM function found in [Y.1731] and [MEF SOAM-PM] and instantiated
at a Flow.

osSoamPmFlowEntry row .1.3.6.1.4.1.6926.2.10.33.1.1.1.1

The conceptual row of osSoamPmFlowTable.

Indexes

No indexes recorded

Column	Syntax	OID
osSoamPmFlowOperNextIndex This object contains an unused value for a PM session number on a Flow that can be used for either LM or DM sessions, or a zero to indicate that none exist. This value needs to be read in order to find an available in…	IEEE8021-CFM-MIBDot1afCfmIndexIntegerNextFree Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.1.1.1.1
osSoamPmFlowLmSinglEndResponder This attribute specifies whether the Loss Measurement (LMM) single ended responder is enabled. The value 'true' indicates the single ended Loss Measurement responder is enabled and if a LMM message is re…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.1.1.1.2
osSoamPmFlowSlmSinglEndResponder This attribute specifies whether the Synthetic Loss Measurement (SLM) single ended responder is enabled. The value 'true' indicates the single ended SLM responder is enabled and if a SLM message is rece…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.1.1.1.3
osSoamPmFlowDmSinglEndResponder This attribute specifies whether the Delay Measurement (DMM) single ended responder is enabled. The value 'true' indicates the single ended Delay Measurement responder is enabled and if a DMM message is …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.1.1.1.4

This table contains Configuration Profiles both for LM and DM.

osSoamPmGenPrflEntry row .1.3.6.1.4.1.6926.2.10.33.1.2.1.1

Contains an entry of the table.

Indexes

osSoamPmGenPrflId

Column	Syntax	OID
osSoamPmGenPrflId Id of the profile.	OS-COMMON-TC-MIBEntityName Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.1
osSoamPmGenPrflMessagePeriod This attribute specifies the interval between Los/Delay Measurement OAM message transmission. For Los/Delay Measurement monitoring applications the default value is 1 sec (1000 ms). This attribute is no…	msMEF-SOAM-TC-MIBMefSoamTcMeasurementPeriodTyper/w Type Constraints: range: 3..3600000	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.2
osSoamPmGenPrflFrameSize This attribute specifies the size between 64 bytes and the maximum transmission unit of the EVC. The range of frame sizes from 64 through 2000 octets, in 4 octet increments, is necessary to be supported…	bytesUnsigned32r/w Constraints: range: 64-9600	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.4
osSoamPmGenPrflDataPattern This attribute specifies the data pattern included in a Data TLV when the size of the LM frame is determined by the osSoamLmFrameSize object and osSoamLmTestTlvIncluded is 'false'. If the frame size obje…	MEF-SOAM-TC-MIBMefSoamTcDataPatternTyper/w Type Values: 1 zeroPattern 2 onesPattern	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.5
osSoamPmGenPrflTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size of the LM frame is determined by the osSoamLmFrameSize object. A value of 'true' indicates that the Test TLV is to be included. A value …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.6
osSoamPmGenPrflTestTlvPattern This attribute specifies the type of test pattern to be sent in the LM frame Test TLV when the size of LM PDU is determined by the osSoamLmFrameSize object and osSoamLmTestTlvIncluded is 'true'. If the frame size obje…	MEF-SOAM-TC-MIBMefSoamTcTestPatternTyper/w Type Values: 1 null 2 nullCrc32 3 prbs 4 prbsCrc32	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.7
osSoamPmGenPrflMeasurementInt This attribute specifies a measurement interval in minutes. A measurement interval of 15 minutes is to be supported, other intervals can be supported.	minutesUnsigned32r/w Constraints: range: 1-525600	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.8
osSoamPmGenPrflNumIntsStored This attribute specifies the number of completed measurement intervals to store in the history statistic table. At least 32 completed measurement intervals are to be stored. 96 measurement intervals are …	Unsigned32r/w Constraints: range: 2-1000	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.9
osSoamPmGenPrflRepetitionPeriod This object specifies a configurable repetition time between Measurement Intervals in a Loss Measurement session, in seconds. If the value is 0, there is no time gap between the end of one Measurement Int…	secondsUnsigned32r/w Constraints: range: 0-31536000	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.10
osSoamPmGenPrflAlignMeasInts This attribute specifies whether the measurement intervals for the Loss Measurement session are aligned with a zero offset to real time. The value 'true' indicates that each Measurement Int starts at a ti…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.11
osSoamPmGenPrflLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.97
osSoamPmGenPrflAdminStatus .	OS-COMMON-TC-MIBEntryValidatorr/w Type Values: 1 unknown 2 nothing 3 delete 4 create	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.98
osSoamPmGenPrflOperStatus .	OS-COMMON-TC-MIBProfileStatus Type Values: 1 unknown 5 busy 6 free 9 underProcessing	.1.3.6.1.4.1.6926.2.10.33.1.2.1.1.99

This table contains Configuration Profiles for Ethernet Loss Measurement.

osSoamPmLmPrflEntry row .1.3.6.1.4.1.6926.2.10.33.1.2.2.1

Contains an entry of the table.

Indexes

osSoamPmLmPrflId

Column	Syntax	OID
osSoamPmLmPrflId Id of the profile.	OS-COMMON-TC-MIBEntityName Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.1
osSoamPmLmPrflType This attribute specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU generated and received SLR …	Enumerationr/w Enumerated Values: 1 lmLmm 2 lmSlm 3 lmCcm	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.2
osSoamPmLmPrflVersion This attribute indicates the version of the PDUs used to perform Loss Measurement. Version 0 indicates the PDU formats defined in Y.1731-2008. Version 1 indicates the PDU formats defined in Y.1731-2011. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.3
osSoamPmLmPrflMeasurementEnable Indicates LM Measurement values supported by the LM Profile.	SoamLmCapabilitiesr/w Type Values: 0 bForwardTransmitedFrames 1 bForwardReceivedFrames 2 bForwardMinFlr 3 bForwardMaxFlr 4 bForwardAvgFlr 5 bBackwardTransmitedFrames 6 bBackwardReceivedFrames 7 bBackwardMinFlr 8 bBackwardMaxFlr 9 bBackwardAvgFlr 10 bInitiatedMeasurements 11 bReceivedMeasurements 12 bAvailForwardHighLoss 13 bAvailForwardConsHighLoss 14 bAvailForwardAvailable 15 bAvailForwardUnavailable 16 bAvailBackwardHighLoss 17 bAvailBackwardConsHighLoss 18 bAvailBackwardAvailable 19 bAvailBackwardUnavailable 20 bMeasStatsForwardMeasuredFlr 21 bMeasStatsBackwardMeasuredFlr 22 bMeasStatsAvailForwardStatus 23 bMeasStatsAvailBackwardStatus	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.4
osSoamPmLmPrflAvailMeasInt This attribute specifies the availability measurement interval in minutes. A measurement interval of 15 minutes is to be supported, other intervals can be supported.	minutesUnsigned32r/w Constraints: range: 1-525600	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.6
osSoamPmLmPrflAvailFlrThr This attribute specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availability threshold range of 0.00 (0) th…	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.8
osSoamPmLmPrflAvailNumConsInts This object specifies a configurable number of consecutive availability indicators to be used to determine a change in the availability status as indicated by MEF 10.2.1. This parameter is equivalent to the Availability…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.9
osSoamPmLmPrflAvailNumConHighFlr This attribute specifies a configurable number of consecutive FLR measurements to be used for assessing CHLI. This parameter is equivalent to the Resilency parameter of 'p' as specified by MEF 10.2.1. os…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.10
osSoamPmLmPrflNumSynthFramesFlr This object specifies the number of consecutive synthetic loss measurement frames to use in order to calculate the frame loss ratio. This object is only valid for lmSLM LM measurements. It is ignored for…	Unsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.11
osSoamPmLmPrflLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.97
osSoamPmLmPrflAdminStatus .	OS-COMMON-TC-MIBEntryValidatorr/w Type Values: 1 unknown 2 nothing 3 delete 4 create	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.98
osSoamPmLmPrflOperStatus .	OS-COMMON-TC-MIBProfileStatus Type Values: 1 unknown 5 busy 6 free 9 underProcessing	.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.99

This table contains the list of Loss Measurement configuration threshold
values for LM Performance Monitoring. Instances of this managed object
are created automatically by the Flow when the Flow creates an instance 
of OsSoamLmCfg.
          
The main purpose of the threshold configuration table is to configure
threshold alarm notifications indicating that a specific performance
attribute is not being met.
          
Each row in the table represents a Loss Measurement session threshold
set for the defined Flow. This table uses five indices. The first three
indices are the indices of the Maintenance Domain, MaNet, and Flow tables.
The fourth index is the specific LM session on the selected Flow. The
fifth index is the specific threshold set number. 
          
Rows in this table are not created automatically. A row is created in
this table to set up a threshold set on a configured Flow that has a
configured LM session.
          
If two managers try to 'create' the same row at the same time, the first
creation would succeed, the second creation attempt would result in an
error. The second creation attempt would then need to select a new index
value to successfully create a new row.
          
At least one threshold set is necessary for NE SOAM PM compliance. A 
second threshold set on the NE is desirable. More than two threshold 
sets can be configured on the NE if supported on the NE.
          
All the objects in the row have a default value that disables the
particular threshold measurement. In order to enable a threshold 
measurement the particular bit in the osSoamPmLmThrPrflEnable object
is to be set to '1' and the selected threshold measurement is to have
a threshold value configured. Non-configured threshold measurements
are disabled by default.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

osSoamPmLmThrPrflEntry row .1.3.6.1.4.1.6926.2.10.33.1.2.3.1

The conceptual row of osSoamPmLmThrPrflTable.

Indexes

osSoamPmLmThrPrflId

Column	Syntax	OID
osSoamPmLmThrPrflId Id of the profile.	OS-COMMON-TC-MIBEntityName Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.1
osSoamPmLmThrPrflEnable Indicates LM Thresholds notifications supported by the profile.	SoamLmThrCapabilitiesr/w Type Values: 0 bOsSoamLmMaxFlrFwThr 1 bOsSoamLmAvgFlrFwThr 2 bOsSoamLmMaxFlrBwThr 3 bOsSoamLmAvgFlrBwThr 4 bOsSoamLmFwHiLosThr 5 bOsSoamLmBwHiLosThr 6 bOsSoamLmFwConHiLosThr 7 bOsSoamLmBwConHiLosThr 8 bOsSoamLmUnavFwThr 9 bOsSoamLmUnavBwThr 10 bOsSoamLmAvailRatioFwThr 11 bOsSoamLmAvailRatioBwThr	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.2
osSoamPmLmThrPrflMaxFlrFwThr This object is used to set the maximum Fw frame loss ratio threshold value that will be used to determine if a threshold notification generated.	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.4
osSoamPmLmThrPrflAvgFlrFwThr This object is used to set the average Fw frame loss ratio threshold value that will be used to determine if a threshold notification generated.	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.5
osSoamPmLmThrPrflMaxFlrBwThr This object is used to set the maximum Bw frame loss ratio threshold value that will be used to determine if a threshold notification is generated.	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.7
osSoamPmLmThrPrflAvgFlrBwThr This object is used to set the average Bw frame loss ratio threshold value that will be used to determine if a threshold notification is generated.	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.8
osSoamPmLmThrPrflFwHiLosThr This object is used to set the Fw high loss threshold value that will be used to determine if a threshold notification is generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.9
osSoamPmLmThrPrflFwConHiLosThr This object is used to set the consecutive Fw high loss threshold value that will be used to determine if a threshold notification is generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.10
osSoamPmLmThrPrflBwHiLosThr This object is used to set the Bw high loss threshold value that will be used to determine if a threshold notification is generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.11
osSoamPmLmThrPrflBwConHiLosThr This object is used to set the consecutive Bw high loss threshold value that will be used to determine if a threshold notification is generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.12
osSoamPmLmThrPrflFwUnavCountThr This object is used to set the Fw unavailability threshold value that will be used to determine if a threshold notification generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.13
osSoamPmLmThrPrflFwAvailRatioThr This object is used to set the Fw availability/total time ratio threshold value that will be used to determine if a threshold notification generated if the ratio drops below the configured value. The rat…	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.14
osSoamPmLmThrPrflBwUnavCountThr This object is used to set the Bw unavailability threshold value that will be used to determine if a threshold notification generated.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.15
osSoamPmLmThrPrflBwAvailRatioThr This object is used to set the Bw availability/total time ratio threshold value that will be used to determine if a threshold notification generated if the ratio drops below the configured value. The rat…	milli-percentUnsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.16
osSoamPmLmThrPrflLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.97
osSoamPmLmThrPrflAdminStatus .	OS-COMMON-TC-MIBEntryValidatorr/w Type Values: 1 unknown 2 nothing 3 delete 4 create	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.98
osSoamPmLmThrPrflOperStatus .	OS-COMMON-TC-MIBProfileStatus Type Values: 1 unknown 5 busy 6 free 9 underProcessing	.1.3.6.1.4.1.6926.2.10.33.1.2.3.1.99

This table contains Cinfiguration Profiles for Ethernet Delay Measurement.

osSoamPmDmPrflEntry row .1.3.6.1.4.1.6926.2.10.33.1.2.4.1

Contains an entry of the table.

Indexes

osSoamPmDmPrflId

Column	Syntax	OID
osSoamPmDmPrflId Id of the profile.	OS-COMMON-TC-MIBEntityName Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.1
osSoamPmDmPrflType This attribute indicates what type of Delay Measurement to be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (1-way or 2-way measurements) dm1DmTx(2) 1D…	Enumerationr/w Enumerated Values: 1 dmDmm 2 dm1DmTx 3 dm1DmRx	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.2
osSoamPmDmPrflVersion This attribute indicates the version of the PDUs used to perform Delay Measurement. Version 0 indicates the PDU formats defined in Y.1731-2008. Version 1 indicates the PDU formats defined in Y.1731-2011.…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.3
osSoamPmDmPrflMeasurementEnable Indicates DM Measurement values supported by the DM Profile.	SoamDmCapabilitiesr/w Type Values: 0 bInitiatedMeasurementCounter 1 bReceivedMeasurementCounter 2 bFdTwBins 3 bFdTwMin 4 bFdTwMax 5 bFdTwAvg 6 bFdFwBins 7 bFdFwMin 8 bFdFwMax 9 bFdFwAvg 10 bFdBwBins 11 bFdBwMin 12 bFdBwMax 13 bFdBwAvg 14 bIfdvFwBins 15 bIfdvFwMin 16 bIfdvFwMax 17 bIfdvFwAvg 18 bIfdvBwBins 19 bIfdvBwMin 20 bIfdvBwMax 21 bIfdvBwAvg 22 bIfdvTwBins 23 bIfdvTwMin 24 bIfdvTwMax 25 bIfdvTwAvg 26 bMeasStatsFdTw 27 bMeasStatsFdFw 28 bMeasStatsFdBw 29 bMeasStatsIfdvTw 30 bMeasStatsIfdvFw 31 bMeasStatsIfdvBw	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.4
osSoamPmDmPrflIfdvSelOffset This attribute specifies the selection offset for Inter-Frame Delay Variation measurements. If this value is set to n, then the IFDV is calculated by taking the difference in frame delay between frame F and frame (F…	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.5
osSoamPmDmPrflNuMeasBinPrFdInt This attribute specifies the number of measurement bins per measurement interval for Frame Delay measurements. At least 3 bins are to be supported; at least 10 bins are recommended to be supported.	Unsigned32r/w Constraints: range: 2-100	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.6
osSoamPmDmPrflNuMeasBinPrIfdvInt This attribute specifies the number of measurement bins per measurement interval for Inter-Frame Delay Variation measurements. The minimum number of measurement bins to be supported is 1. The desired …	Unsigned32r/w Constraints: range: 2-100	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.7
osSoamPmDmPrflLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.97
osSoamPmDmPrflAdminStatus .	OS-COMMON-TC-MIBEntryValidatorr/w Type Values: 1 unknown 2 nothing 3 delete 4 create	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.98
osSoamPmDmPrflOperStatus .	OS-COMMON-TC-MIBProfileStatus Type Values: 1 unknown 5 busy 6 free 9 underProcessing	.1.3.6.1.4.1.6926.2.10.33.1.2.4.1.99

This table contains the list of Delay Measurement threshold configuration
values for DM Performance Monitoring. Instances of this managed object
are created automatically by the Flow when the Flow creates an instance 
of OsSoamDmCfg.
          
The main purpose of the threshold configuration table is to configure
threshold alarm notifications indicating that a specific performance
attribute is not being met.
          
Each row in the table represents a Delay Measurement session threshold
set for the defined Flow. This table uses five indices. The first three
indices are the indices of the Maintenance Domain, MaNet, and Flow tables.
The fourth index is the specific DM session on the selected Flow. The
fifth index is the specific threshold set number. 
          
Rows in this table are not created automatically. A row is created in
this table to set up a threshold set on a configured Flow that has a
configured DM session.
          
At least one threshold set is necessary for NE SOAM PM compliance. A 
second threshold set on the NE is desirable. More than two threshold 
sets on the NE can be configured if supported on the NE.
          
All the objects in the row have a default value that disables the
particular threshold measurement. In order to enable a threshold 
measurement the particular bit in the osSoamPmDmThrPrflEnable object
is to be set to '1' and the selected threshold measurement is to have
a threshold value configured. Non-configured threshold measurements
are disabled by default.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

osSoamPmDmThrPrflEntry row .1.3.6.1.4.1.6926.2.10.33.1.2.5.1

The conceptual row of osSoamPmDmThrPrflTable.

Indexes

osSoamPmDmThrPrflId

Column	Syntax	OID
osSoamPmDmThrPrflId Id of the profile.	OS-COMMON-TC-MIBEntityName Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.1
osSoamPmDmThrPrflEnable Indicates DM Thresholds notifications supported by the profile.	SoamDmThrCapabilitiesr/w Type Values: 0 bOsSoamDmMaxFdTwThr 1 bOsSoamDmAvgFdTwThr 2 bOsSoamDmMaxFdFwThr 3 bOsSoamDmAvgFdFwThr 4 bOsSoamDmMaxFdBwThr 5 bOsSoamDmAvgFdBwThr 6 bOsSoamDmMaxIfdvFwThr 7 bOsSoamDmAvgIfdvFwThr 8 bOsSoamDmMaxIfdvBwThr 9 bOsSoamDmAvgIfdvBwThr	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.2
osSoamPmDmThrPrflMaxFdTwThr This object is used to set the maximum two-way delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.4
osSoamPmDmThrPrflAvgFdTwThr This object is used to set the average two-way delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.5
osSoamPmDmThrPrflMaxFdFwThr This object is used to set the maximum Fw delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.10
osSoamPmDmThrPrflAvgFdFwThr This object is used to set the average Fw delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.11
osSoamPmDmThrPrflMaxIfdvFwThr This object is used to set the maximum IFDV threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.13
osSoamPmDmThrPrflAvgIfdvFwThr This object is used to set the average IFDV threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.14
osSoamPmDmThrPrflMaxFdBwThr This object is used to set the maximum Bw delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.16
osSoamPmDmThrPrflAvgFdBwThr This object is used to set the average Bw delay threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.17
osSoamPmDmThrPrflMaxIfdvBwThr This object is used to set the maximum Bw IFDV threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.19
osSoamPmDmThrPrflAvgIfdvBwThr This object is used to set the average Bw IFDV threshold value that will be used to determine if a threshold notification is generated.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.20
osSoamPmDmThrPrflLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.97
osSoamPmDmThrPrflAdminStatus .	OS-COMMON-TC-MIBEntryValidatorr/w Type Values: 1 unknown 2 nothing 3 delete 4 create	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.98
osSoamPmDmThrPrflOperStatus .	OS-COMMON-TC-MIBProfileStatus Type Values: 1 unknown 5 busy 6 free 9 underProcessing	.1.3.6.1.4.1.6926.2.10.33.1.2.5.1.99

This table includes configuration attributes and operations for the 
Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM]. 
          
Each row in the table represents a Loss Measurement session for
the defined Flow. This table uses three indices. The first two indices
are the indices of the Flow. The third index is the specific LM session
on the selected Flow. A Loss Measurement session is created on an existing
Flow by first accessing the osSoamPmFlowOperNextIndex object and using this value as 
the osSoamLmCfgIndex in the row creation.
          
Some writable objects in this table are only applicable in certain cases
(as described under each object), and attempts to write values for them 
in other cases will be ignored.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

osSoamLmCfgEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.1.1

The conceptual row of osSoamLmCfgTable.

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex

Column	Syntax	OID
osSoamLmCfgIndex An index to the Loss Measurement Configuration table which indicates the specific measurement session for the Flow. osSoamPmFlowOperNextIndex needs to be inspected to find an available index for row-creat…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.1
osSoamLmCfgEnabled This attribute specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled and SOAM PDUs are sent and/or measurements are collected when …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.2
osSoamLmCfgGenPrfl Name of General Pm configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.3
osSoamLmCfgLmPrfl Name of Lm Availability configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.4
osSoamLmCfgLmThrPrfl Name of Lm Thrs configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.5
osSoamLmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted. If osSoamPmLmPrflType is 'lmCcm', the destination MAC address is always a multicast address indicating the level of the MEG: 01-80-c2-00-00…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.6
osSoamLmCfgDestMepId The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column osSoamLmD…	OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.7
osSoamLmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP is used for SOAM LM frame transmission.…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.8
osSoamLmCfgStartTimeType This attribute specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' is illegal and a write error will be retur…	MEF-SOAM-TC-MIBMefSoamTcOperationTimeTyper/w Type Values: 1 none 2 immediate 3 relative 4 fixed	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.9
osSoamLmCfgFixedStartDateAndTime This attribute specifies the fixed start date/time for the SOAM Loss Measurement session. This attribute is used only used if osSoamLmStartTimeType is 'fixed' and is ignored otherwise. The default value…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.10
osSoamLmCfgRelativeStartTime This attribute specifies the relative start time, from the current system time, for the SOAM LM session. This attribute is used only if osSoamLmStartTimeType is 'relative' and is ignored otherwise. This…	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.11
osSoamLmCfgStopTimeType This attribute specifies the type of stop time to terminate the SOAM LM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indicates that the SOAM LM session never ends…	MEF-SOAM-TC-MIBMefSoamTcOperationTimeTyper/w Type Values: 1 none 2 immediate 3 relative 4 fixed	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.12
osSoamLmCfgFixedStopDateAndTime This attribute specifies the fixed stop date/time for the SOAM Loss Measurement session. This attribute is used only used if osSoamLmStopTimeType is 'fixed' and is ignored otherwise. The default value i…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.13
osSoamLmCfgRelativeStopTime This attribute specifies the relative stop time, from the session start time, to stop the SOAM LM session. This attribute is used only if osSoamLmStopTimeType is 'relative' and is ignored otherwise. Thi…	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.14
osSoamLmCfgSessionStatus This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active. A value of 'notActive' indicates the current LM session is not active, has not started yet, or …	MEF-SOAM-TC-MIBMefSoamTcStatusType Type Values: 1 active 2 notActive	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.15
osSoamLmCfgHistClear This object when written clears the Loss Measurement history Table (osSoamLmHistStatsTable) - all rows are deleted. When read the value always returns 'false'. Writing this value does not change the curr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.16
osSoamLmCfgRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.17
osSoamLmCfgLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.18
osSoamLmCfgSessionStatusEx This object indicates the current extended status of the LM session.	SoamTcStatusExType Type Values: 1 active 2 notActive 3 waitForTimeAlign 4 waitForPortInit 5 waitForRmep 6 waitForFpgaUpgrade 7 waitForLmResponder	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.19
osSoamLmCfgLastHistIndx The last relevant index in osSoamLmHistAvailStatsTable (osSoamLmHistAvailStatsIndex) and osSoamLmHistStatsTable (osSoamLmHistStatsIndex).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.1.1.20

This object contains the last measured results for a SOAM Los 
Measurement session gathered during from the last SOAM PDU received.
          
Each row in the table represents a Loss Measurement session for
the defined Flow. This table uses three indices. The first two indices
are the indices of the Flow. The 
third index is the specific LM session on the selected Flow.
          
Instances of this managed object are created automatically
by the SNMP Agent when the Loss Measurement session is running.
          
The objects in this table can be persistent upon reboot or restart
of a device.

osSoamLmMeasStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.2.1

The conceptual row of osSoamLmMeasStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex

Column	Syntax	OID
osSoamLmMeasStatsAvailFwStatus This attribute indicates the availability status (the outcome of the last availability indicator) in the Fw direction based upon the last received SOAM PDU.	MEF-SOAM-TC-MIBMefSoamTcAvailabilityType Type Values: 1 available 2 unavailable 3 unknown	.1.3.6.1.4.1.6926.2.10.33.1.3.2.1.3
osSoamLmMeasStatsAvailBwStatus This attribute indicates the availability status (the outcome of the last availability indicator) in the Bw direction based upon the last received SOAM PDU.	MEF-SOAM-TC-MIBMefSoamTcAvailabilityType Type Values: 1 available 2 unavailable 3 unknown	.1.3.6.1.4.1.6926.2.10.33.1.3.2.1.4
osSoamLmMeasStatsAvailFwLastTr This object indicates the time of the last transition between available and unavailable in the Fw direction. If there have been no transitions since the Loss Measurement Session was started, this is set t…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.2.1.5
osSoamLmMeasStatsAvailBwLastTr This object indicates the time of the last transition between available and unavailable in the Bw direction. If there have been no transitions since the Loss Measurement Session was started, this is set t…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.2.1.6

This object contains the last results for a SOAM Loss Measurement
session for availability statistics gathered during the interval 
indicated by osSoamLmCfgAvailabilityMeasurementInterval.
          
Each row in the table represents a Loss Measurement session for
the defined MEP. 
          
Instances of this managed object are created automatically
by the SNMP Agent when the Loss Measurement session is running..

osSoamLmLastAvailStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.3.1

The conceptual row of osSoamLmLastAvailStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex

Column	Syntax	OID
osSoamLmLastAvailStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.2
osSoamLmLastAvailStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.3
osSoamLmLastAvailStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.4
osSoamLmLastAvailStatsFwHiLos This object is the number of high loss intervals (HLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in ME…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.5
osSoamLmLastAvailStatsBwHiLos This object is the number of high loss intervals (HLI) over time in the Bw direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in ME…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.6
osSoamLmLastAvailStatsFwConHiLos This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs that is determined to fall within a CHLI…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.7
osSoamLmLastAvailStatsBwConHiLos This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs that is determined to fall within a CHLI.…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.8
osSoamLmLastAvailStatsFwAvail This object contains the number of availability indicators evaluated as available in the Fw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.9
osSoamLmLastAvailStatsBwAvail This object contains the number of availability indicators evaluated as available in the Bw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.10
osSoamLmLastAvailStatsFwUnav This object contains the number of availability indicators evaluated as unavailable in the Fw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.11
osSoamLmLastAvailStatsBwUnav This object contains the number of availability indicators evaluated as unavailable in the Bw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.3.1.12

This table contains the results for the current Measurement
Interval in a SOAM Loss Measurement session gathered during the interval
indicated by osSoamLmCfgMeasurementInterval.
          
A row in this table is created automatically
by the SNMP Agent when the Loss Measurement session is configured.
          
Each row in the table represents the current statistics for a Loss
Measurement session for the defined MEP.

osSoamLmLastStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.4.1

The conceptual row of osSoamLmLastStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex

Column	Syntax	OID
osSoamLmLastStatsIndex The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int that occurs after the session is started is a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.1
osSoamLmLastStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.2
osSoamLmLastStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.3
osSoamLmLastStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.4
osSoamLmLastStatsFwTxFrames This attribute contains the number of frames transmitted in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames only and OAM PDUs that are in …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.5
osSoamLmLastStatsFwRxFrames This attribute contains the number of frames received in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames only and OAM PDUs that are in a hi…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.6
osSoamLmLastStatsFwMinFlr This attribute contains the minimum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.7
osSoamLmLastStatsFwMaxFlr This attribute contains the maximum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.8
osSoamLmLastStatsFwAvgFlr This attribute contains the average one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.9
osSoamLmLastStatsBwTxFrames This attribute contains the number of frames transmitted in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm and is undefined when osSoamPmLmPrflType is…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.10
osSoamLmLastStatsBwRxFrames This attribute contains the number of frames received in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm and is undefined when osSoamPmLmPrflType is l…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.11
osSoamLmLastStatsBwMinFlr This attribute contains the minimum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.12
osSoamLmLastStatsBwMaxFlr This attribute contains the maximum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.13
osSoamLmLastStatsBwAvgFlr This attribute contains the average one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.14
osSoamLmLastStatsInitiatedMeas This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmLmPrflType is lmLmm, lmSlm, or lmCcm. It indicates the num…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.15
osSoamLmLastStatsReceivedMeas This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute only applies when osSoamPmLmPrflType is lmLmm, lmSlm, or lmCcm …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.4.1.16

This table contains the results for availability history Measurement
Ints in a SOAM Loss Measurement session.
          
Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a 
measurement interval is completed.
          
Each row in the table represents the history statistics for a Los
Measurement session measurement interval for the defined Flow. This
table uses five indices. The first three indices are the indices of
the Maintenance Domain, MaNet, and Flow tables. The fourth index is the
specific LM session on the selected Flow. The fifth index index the
specific measurement interval.
          
At least 32 completed measurement intervals are to be supported. 96
completed measurement intervals are recommended to be supported. If
there are at least 32 rows in the table and a new measurement interval
completes and a new row is to be added to the table, the oldest completed
measurement interval can be deleted (row deletion). If the measurement
interval is other than 15 minutes then a minimum of 8 hours of 
completed measurement intervals are to be supported and 24 hours are
recdommended to be supported.
          
Bw statistic objects are undefined if osSoamPmLmPrflType is 1mCcm.
          
Except for osSoamLmHistAvailStatsIndex and 
osSoamLmHistAvailStatsSuspect, each object in this table applies only
if the corresponding bit is set in osSoamPmLmPrflMeasurementEnable.
          
The rows and objects in this table are to be persistent upon reboot 
or restart of a device.

osSoamLmHistAvailStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.5.1

The conceptual row of osSoamLmHistAvailStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex osSoamLmHistAvailStatsIndex

Column	Syntax	OID
osSoamLmHistAvailStatsIndex The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int that occurs after the session is started is a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.1
osSoamLmHistAvailStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.2
osSoamLmHistAvailStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.3
osSoamLmHistAvailStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.4
osSoamLmHistAvailStatsFwHiLos This object is the number of high loss intervals (HLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in ME…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.5
osSoamLmHistAvailStatsBwHiLos This object is the number of high loss intervals (HLI) over time in the Bw direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found in ME…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.6
osSoamLmHistAvailStatsFwConHiLos This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs that is determined to fall within a CHLI…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.7
osSoamLmHistAvailStatsBwConHiLos This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs that is determined to fall within a CHLI.…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.8
osSoamLmHistAvailStatsFwAvail This object contains the number of availability indicators evaluated as available in the Fw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.9
osSoamLmHistAvailStatsBwAvail This object contains the number of availability indicators evaluated as available in the Bw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.10
osSoamLmHistAvailStatsFwUnav This object contains the number of availability indicators evaluated as unavailable in the Fw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.11
osSoamLmHistAvailStatsBwUnav This object contains the number of availability indicators evaluated as unavailable in the Bw direction by this Flow during this measurement interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.5.1.12

This table contains the results for history Measurement
Ints in a SOAM Loss Measurement session.
          
Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a 
measurement interval is completed.
          
Each row in the table represents the history statistics for a Los
Measurement session measurement interval for the defined Flow. This
table uses five indices. The first three indices are the indices of
the Maintenance Domain, MaNet, and Flow tables. The fourth index is the
specific LM session on the selected Flow. The fifth index index the
specific measurement interval.
          
At least 32 completed measurement intervals are to be supported. 96
completed measurement intervals are recommended to be supported. If
there are at least 32 rows in the table and a new measurement interval
completes and a new row is to be added to the table, the oldest completed
measurement interval can be deleted (row deletion). If the measurement
interval is other than 15 minutes then a minimum of 8 hours of 
completed measurement intervals are to be supported and 24 hours are
recdommended to be supported.
          
Bw statistic objects are undefined if osSoamPmLmPrflType is 1mCcm.
          
Except for osSoamLmHistStatsIndex and osSoamLmHistStatsSuspect, 
each object in this table applies only if the corresponding bit is set in 
osSoamPmLmPrflMeasurementEnable.
          
The rows and objects in this table are to be persistent upon reboot 
or restart of a device.

osSoamLmHistStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.3.6.1

The conceptual row of osSoamLmHistStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamLmCfgIndex osSoamLmHistStatsIndex

Column	Syntax	OID
osSoamLmHistStatsIndex The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int that occurs after the session is started is a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.1
osSoamLmHistStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.2
osSoamLmHistStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.3
osSoamLmHistStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.4
osSoamLmHistStatsFwTxFrames This attribute contains the number of frames transmitted in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames only and OAM PDUs that are in …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.5
osSoamLmHistStatsFwRxFrames This attribute contains the number of frames received in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames only and OAM PDUs that are in a hi…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.6
osSoamLmHistStatsFwMinFlr This attribute contains the minimum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.7
osSoamLmHistStatsFwMaxFlr This attribute contains the maximum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.8
osSoamLmHistStatsFwAvgFlr This attribute contains the average one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.9
osSoamLmHistStatsBwTxFrames This attribute contains the number of frames transmitted in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm and is undefined when osSoamPmLmPrflType is…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.10
osSoamLmHistStatsBwRxFrames This attribute contains the number of frames received in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm and is undefined when osSoamPmLmPrflType is l…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.11
osSoamLmHistStatsBwMinFlr This attribute contains the minimum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.12
osSoamLmHistStatsBwMaxFlr This attribute contains the maximum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.13
osSoamLmHistStatsBwAvgFlr This attribute contains the average one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.14
osSoamLmHistStatsInitiatedMeas This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmLmPrflType is lmLmm, lmSlm, or lmCcm. It indicates the num…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.15
osSoamLmHistStatsReceivedMeas This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute only applies when osSoamPmLmPrflType is lmLmm, lmSlm, or lmCcm …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.3.6.1.16

This table includes configuration attributes and operations for the 
Delay Measurement function.  
          
Each row in the table represents a Delay Measurement session for
the defined Flow. This table uses four indices. The first three indices
are the indices of the Maintenance Domain, MaNet, and Flow tables. The 
fourth index is the specific DM session on the selected Flow. 
          
A Delay Measurement session is created on an existing Flow by first 
accessing the osSoamDmOperNextIndex object and using this value as 
the osSoamDmCfgIndex in the row creation.
          
Some writable objects in this table are only applicable in certain cases
(as descrbied under each object), and attempts to write values for them 
in other cases will be ignored.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

osSoamDmCfgEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.1.1

The conceptual row of osSoamDmCfgTable.

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex

Column	Syntax	OID
osSoamDmCfgIndex An index to the Delay Measurement Configuration table which indicates the specific measurement session for the Flow. osSoamPmFlowOperNextIndex needs to be inspected to find an available index for row-crea…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.1
osSoamDmCfgEnabled This attribute specifies whether the Delay Measurement session is enabled. The value 'true' indicates the Delay Measurement session is enabled AND SOAM PDUs are sent and/or measurements are collected whe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.2
osSoamDmCfgGenPrfl Name of General Pm configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.3
osSoamDmCfgDmPrfl Name of Dm configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.4
osSoamDmCfgDmThrPrfl Name of Dm Thr configuration profile.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.5
osSoamDmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted. If osSoamPmDmPrflType is 'dmDmm', the destination address is to be the unicast address of the destination MEP. An error is returned if this …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.6
osSoamDmCfgDestMepId The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will be used if the value of the column osSoamDmD…	OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.7
osSoamDmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP is used for SOAM LM frame transmission.…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.8
osSoamDmCfgSourceMacAddress The Source MAC Address Field of the received SOAM DM session PDUs. If osSoamPmDmPrflType is dm1DmRx this object indicates the source address of the dm1DmTx DM session. This object is only …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.9
osSoamDmCfgStartTimeType This object specifies the type of start time of the SOAM DM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' is illegal and a write error will be returned…	MEF-SOAM-TC-MIBMefSoamTcOperationTimeTyper/w Type Values: 1 none 2 immediate 3 relative 4 fixed	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.10
osSoamDmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the SOAM Delay Measurement session. This object is used only used if osSoamDmCfgStartTimeType is 'fixed' and is ignored otherwise. The default value i…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.11
osSoamDmCfgRelativeStartTime This object specifies the relative start time, from the current system time, for the SOAM DM session. This object is used only if osSoamDmCfgStartTimeType is 'relative' and is ignored otherwise. This ob…	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.12
osSoamDmCfgStopTimeType This object specifies the type of stop time to terminate the SOAM DM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indicates that the SOAM DM session never ends on…	MEF-SOAM-TC-MIBMefSoamTcOperationTimeTyper/w Type Values: 1 none 2 immediate 3 relative 4 fixed	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.13
osSoamDmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the SOAM Delay Measurement session. This object is used only used if osSoamDmCfgStopTimeType is 'fixed' and is ignored otherwise. The default value is …	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.14
osSoamDmCfgRelativeStopTime This object specifies the relative stop time, from the session start time, to stop the SOAM DM session. This object is used only if osSoamDmCfgStopTimeType is 'relative' and is ignored otherwise. This o…	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.15
osSoamDmCfgSessionStatus This object indicates the current status of the DM session. A value of 'active' indicates the current DM session is active. A value of 'notActive' indicates the current DM session is not active, has not started yet, or …	MEF-SOAM-TC-MIBMefSoamTcStatusType Type Values: 1 active 2 notActive	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.16
osSoamDmCfgHistClear This object when written clears the Delay Measurement history tables (osSoamDmHistStatsTable and osSoamDmHistStatsBinsTable) - all rows are deleted. When read the value always returns 'false'. Writing t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.17
osSoamDmCfgRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.18
osSoamDmCfgLastError Last configuration error description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.19
osSoamDmCfgSessionStatusEx This object indicates the current extended status of the DM session.	SoamTcStatusExType Type Values: 1 active 2 notActive 3 waitForTimeAlign 4 waitForPortInit 5 waitForRmep 6 waitForFpgaUpgrade 7 waitForLmResponder	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.20
osSoamDmCfgLastHistIndx The last relevant index in osSoamDmHistStatsTable (osSoamDmHistStatsIndex).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.1.1.21

This table includes configuration attributes for the Delay Measurement 
bins to collect stats.
          
Each row in the table is automatically created when the Delay
Measurement session is defined for the selected Flow. The number of rows
created is based upon three items: the DM type, the number of bins
defined for each type, and whether bins are enabled for each type.
          
The first four indices are the same as used to create the DM session:
Maintenance Domain, MaNet, Flow identification, and osSoamDmCfgIndex. The
fifth index is the type of bin, and the sixth index is the bin number.
          
For a dmDmm session all six types of bins can be created. For a dm1DmmTx
session no bins are created. For a dm1DmmRx session only types 
FwFd and FwIfdv can be created.
          
The number of bins created for a bin type is based upon: the 
osSoamPmDmPrflNuMeasBinPrFdInt object, the 
osSoamPmDmPrflNuMeasBinPrIfdvInt object, and
the osSoamPmDmPrflMeasurementEnable object.
          
For instance, if a dmDmm session with Bins per Frame Delay Int 
set to 5, Bins per Frame Delay Variation Int set to 3, and all 
of the appropriate bits set in osSoamDmMeasurementCfgEnable, the 
following number of rows would be created:
          
For bin types TwFd(1), FwFd(2), and 
BwFd(3) = 5 bins * 3 types = 15 rows
          
For bin types TwIfdv(4), FwIfdv(5), BwIfdv(6) = 
3 bins * 3 types = 9 rows.         
          
This gives a total of 24 rows created for the DMM session example.
          
Each value in the bin defaults to 5000us greater than the previous bin,
with the first bin default value set to 0.
          
For the delay example above (5 bins), the following default values 
would be written to the bins:
      bin 1:     0  (range is 0us <= measurement < 5,000us)
      bin 2:  5000  (range is 5,000us <= measurement < 10,000us)
      bin 3: 10000  (range is 10,000us <= measurement < 15,000us)
      bin 4: 15000  (range is 15,000us <= measurement < 20,000us)
      bin 5: 20000  (range is 20,000us <= measurement < infinity)
          
For the delay variation example above (3 bins), the following default 
values would be written to the bins:
      bin 1:     0  (range is 0us <= measurement < 5,000us)
      bin 2:  5000  (range is 5,000us <= measurement < 10,000us)
      bin 3: 10000  (range is 10,000us <= measurement < infinity)
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device. 
          
Rows are only created if the corresponding measurement type has been enabled 
via the osSoamPmDmPrflMeasurementEnable object.

osSoamDmCfgMeasBinEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.2.1

The conceptual row of osSoamDmCfgMeasBinTable.

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex osSoamDmCfgMeasBinType

Column	Syntax	OID
osSoamDmCfgMeasBinType This attribute specifies whether the bin number is for Frame Delay or Inter-Frame Delay Variation.	MEF-SOAM-TC-MIBMefSoamTcDelayMeasurementBinType Type Values: 1 twoWayFrameDelay 2 forwardFrameDelay 3 backwardFrameDelay 4 twoWayIfdv 5 forwardIfdv 6 backwardIfdv 7 twoWayFrameDelayRange 8 forwardFrameDelayRange 9 backwardFrameDelayRange	.1.3.6.1.4.1.6926.2.10.33.1.4.2.1.1
osSoamDmCfgMeasBinPrflId Name of Bins configuration profile that is found in osProvBinPrflTable.	OS-COMMON-TC-MIBEntityNamer/w Type Constraints: range: 1..30	.1.3.6.1.4.1.6926.2.10.33.1.4.2.1.2

This table contains the results for the current Measurement
Interval in a SOAM Delay Measurement session gathered.
          
A row of this table is created or updated automatically
by the SNMP Agent when the Delay Measurement session is running and a
measurement interval is completed.
          
Each row in the table represents the current statistics for a Delay
Measurement session for the defined Service/Flow.
          
The objects in this table do not need to be persistent upon reboot or
restart of a device.

osSoamDmLastStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.4.1

The conceptual row of osSoamDmLastStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex

Column	Syntax	OID
osSoamDmLastStatsIndex The last relevant index in osSoamDmHistStatsTable (osSoamDmHistStatsIndex).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.1
osSoamDmLastStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmDmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.2
osSoamDmLastStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmDmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.3
osSoamDmLastStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.4
osSoamDmLastStatsFdTwMin This attribute contains the minimum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.5
osSoamDmLastStatsFdTwMax This attribute contains the maximum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.6
osSoamDmLastStatsFdTwAvg This attribute contains the average two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.7
osSoamDmLastStatsFdFwMin This attribute contains the minimum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.8
osSoamDmLastStatsFdFwMax This attribute contains the maximum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.9
osSoamDmLastStatsFdFwAvg This attribute contains the average one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.10
osSoamDmLastStatsFdBwMin This attribute contains the minimum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.11
osSoamDmLastStatsFdBwMax This attribute contains the maximum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.12
osSoamDmLastStatsFdBwAvg This attribute contains the average one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.13
osSoamDmLastStatsIfdvFwMin This attribute contains the minimum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.14
osSoamDmLastStatsIfdvFwMax This attribute contains the maximum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.15
osSoamDmLastStatsIfdvFwAvg This attribute contains the average one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.16
osSoamDmLastStatsIfdvBwMin This attribute contains the minimum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.17
osSoamDmLastStatsIfdvBwMax This attribute contains the maximum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.18
osSoamDmLastStatsIfdvBwAvg This attribute contains the average one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.19
osSoamDmLastStatsInitiatedMeas This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmDmPrflType is dmDmm or dm1DmRx and is undefined if osSoamPm…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.23
osSoamDmLastStatsReceivedMeas This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute applies when osSoamPmDmPrflType is dmDmm or dm1DmRx and is unde…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.4.1.24

This table contains the result bins for the current Measurement
Interval in a SOAM Delay Measurement session.
          
Each row in the table represents the current bin statistics for a
Delay Measurement session for the defined Service/Flow.
          
A row in this table is created automatically
by the SNMP Agent when the Delay Measurement session is configured.

osSoamDmLastStatsBinsEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.5.1

The conceptual row of osSoamDmLastStatsBinsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex osSoamDmCfgMeasBinType OS-PROV-BINS-MIBosProvBinCfgBinIndex

Column	Syntax	OID
osSoamDmLastStatsBinsCounter This attribute contains the count of the number of completed measurements initiated in this measurement interval whose value falls within the range specified for this bin (that is, greater than or equal to the measureme…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.5.1.1

This table contains the results for history Measurement
Ints in a SOAM Delay Measurement session.
          
Rows of this table are created automatically
by the SNMP Agent when the Delay Measurement session is running and a
measurement interval is completed.
          
Each row in the table represents the measurement interval history
statistics for a Delay Measurement session for the defined Flow. This
table uses four indices. The first two indices are the indices of
the EService name and Flow ID. The third index is the
specific DM session on the selected Flow. The fourth index is the 
measurement interval.
          
Several completed measurement intervals are to be supported, number of them are
definded by osSoamPmGenPrflNumIntsStored. 96 completed measurement intervals are
recommended to be supported. If there are osSoamPmGenPrflNumIntsStored rows in the
table and a new measurement interval completes and a new row is to be added to
the table, the oldest completed measurement interval can be deleted (row deletion).
If the measurement interval is other than 15 minutes then a minimum of 8 hours of 
completed measurement intervals are to be supported and 24 hours are
recdommended to be supported.
          
Unless otherwise indicated, the objects in this table 
are ignored if osSoamPmDmPrflType is dm1DmTx. Bw statistic objects
are undefined if osSoamPmDmPrflType is dm1DmRx. Two-way objects are
undefined if osSoamPmDmPrflType is dm1DmTx or dm1DmRx.
          
Except for osSoamDmHistStatsIndex and osSoamDmHistStatsSuspect, 
each object in this table applies only if the corresponding bit is set in 
osSoamPmDmPrflMeasurementEnable.
          
The rows and objects in this table are to be persistent upon reboot 
or restart of a device.

osSoamDmHistStatsEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.6.1

The conceptual row of osSoamDmHistStatsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex osSoamDmHistStatsIndex

Column	Syntax	OID
osSoamDmHistStatsIndex The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int that occurs after the session is started is a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.1
osSoamDmHistStatsEndTime The time that the measurement interval ended. This object applies regardless of the value of osSoamPmDmPrflType.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.2
osSoamDmHistStatsElapTime The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmDmPrflType.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.3
osSoamDmHistStatsSuspect Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the measurement interval. Conditions for a dis…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.4
osSoamDmHistStatsFdTwMin This attribute contains the minimum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.5
osSoamDmHistStatsFdTwMax This attribute contains the maximum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.6
osSoamDmHistStatsFdTwAvg This attribute contains the average two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflType is dm1DmTx or dm1DmRx.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.7
osSoamDmHistStatsFdFwMin This attribute contains the minimum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.8
osSoamDmHistStatsFdFwMax This attribute contains the maximum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.9
osSoamDmHistStatsFdFwAvg This attribute contains the average one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.10
osSoamDmHistStatsFdBwMin This attribute contains the minimum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.11
osSoamDmHistStatsFdBwMax This attribute contains the maximum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.12
osSoamDmHistStatsFdBwAvg This attribute contains the average one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyncFlag is set to 'true'. The value of this att…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.13
osSoamDmHistStatsIfdvFwMin This attribute contains the minimum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.14
osSoamDmHistStatsIfdvFwMax This attribute contains the maximum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.15
osSoamDmHistStatsIfdvFwAvg This attribute contains the average one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.16
osSoamDmHistStatsIfdvBwMin This attribute contains the minimum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.17
osSoamDmHistStatsIfdvBwMax This attribute contains the maximum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.18
osSoamDmHistStatsIfdvBwAvg This attribute contains the average one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of this attribute is undefined when osSoamPmDmPr…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.19
osSoamDmHistStatsInitiatedMeas This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmDmPrflType is dmDmm or dm1DmRx and is undefined if osSoamPm…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.23
osSoamDmHistStatsReceivedMeas This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute applies when osSoamPmDmPrflType is dmDmm or dm1DmRx and is unde…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.6.1.24

This table contains the result bins for the history Measurement
Ints in a SOAM Delay Measurement session.
          
Rows of this table are created automatically
by the SNMP Agent when the Delay Measurement session is running and a
measurement interval is completed.
          
Each row in the table represents the measurement interval history
statistics for a specific bin in a Delay Measurement session for the
defined Flow. This table uses six indices. The first two indices are the indices of
the EService name and Flow ID. The third index is the
specific DM session on the selected Flow. The fourth index is the 
measurement interval.
The fifth  index is the specific bin type. The sixth index is the specific bin number.
          
Several completed measurement intervals are to be supported, number of them are
definded by osSoamPmGenPrflNumIntsStored. 96 completed measurement intervals
are recommended to be supported. If there are at least osSoamPmGenPrflNumIntsStored
rows in the table and a new measurement interval completes and a new row is to
be added to the table, the oldest completed measurement interval can be deleted (row
deletion). If the measurement interval is other than 15 minutes then a minimum of 8
hours of completed measurement intervals are to be supported and 24 hours are
recdommended to be supported.
          
Rows in this table pertaining to a given measurement interval are 
deleted when (and only when) the corresponding row in the 
osSoamDmHistStatsTable is deleted.
          
The objects in this table are ignored if osSoamPmDmPrflType is 1DmTx.
          
This table applies only if the corresponding bit is set in 
osSoamPmDmPrflMeasurementEnable.
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

osSoamDmHistStatsBinsEntry row .1.3.6.1.4.1.6926.2.10.33.1.4.7.1

The conceptual row of osSoamDmHistStatsBinsTable

Indexes

OS-ETH-SERV-MIBosEthServId OS-ETH-SERV-MIBosEthServFlowId osSoamDmCfgIndex osSoamDmHistStatsIndex osSoamDmCfgMeasBinType OS-PROV-BINS-MIBosProvBinCfgBinIndex

Column	Syntax	OID
osSoamDmHistStatsBinsCounter This attribute contains the count of the number of completed measurements initiated in this measurement interval whose value falls within the range specified for this bin (that is, greater than or equal to the measureme…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6926.2.10.33.1.4.7.1.1