portEgressRate

Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type:
    Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7)
    where:
    0 = 100 Mbps
    1 = 128 kbps
    2 = 256 kbps
    3 = 512 kbps
    4 = 1 Mbps
    5 = 2 Mbps
    6 = 4 Mbps
    7 = 8 Mbps
    Used on types 100, 101 (lower limit=1, upper limit=20)
    where:
    1 = 64 kbps
    2 = 128 kbps
    3 = 256 kbps
    4 = 512 kbps
    5 = 768 kbps
    6 = 1 Mbps
    7 = 2 Mbps
    8 = 3 Mbps
    9 = 4 Mbps
    10 = 5 Mbps
    11 = 6 Mbps
    12 = 7 Mbps
    13 = 8 Mbps
    14 = 9 Mbps
    15 = 10 Mbps
    16 = 20 Mbps
    17 = 30 Mbps
    18 = 40 Mbps
    19 = 50 Mbps
    20 = 100 Mbps
    Used on types 105, 106 (lower limit=1, upper limit=33)
    1 = 64 kbps
    2 = 128 kbps
    3 = 256 kbps
    4 = 512 kbps
    5 = 768 kbps
    6 = 1 Mbps
    7 = 2 Mbps
    8 = 3 Mbps
    9 = 4 Mbps
    10 = 5 Mbps
    11 = 6 Mbps
    12 = 7 Mbps
    13 = 8 Mbps
    14 = 9 Mbps
    15 = 10 Mbps
    16 = 20 Mbps
    17 = 30 Mbps
    18 = 40 Mbps
    19 = 50 Mbps
    20 = 60 Mbps
    21 = 70 Mbps
    22 = 80 Mbps
    23 = 90 Mbps
    24 = 100 Mbps
    25 = 200 Mbps
    26 = 300 Mbps
    27 = 400 Mbps
    28 = 500 Mbps
    29 = 600 Mbps
    30 = 700 Mbps
    31 = 800 Mbps
    32 = 900 Mbps
    33 = 1000 Mbps
    Types 97, 99, 102, 108, 109, 112, 113 use numeric values in kpbs
    with a lower limit of 64 and an upper limit of 1,000,000.
    Types not listed have no limit.

MIB

OMNITRON-MIB

OID

.1.3.6.1.4.1.7342.2.1.4.1.3

Type

column

Access

readwrite

Status

current

Parent

modulePortsEntry