OMNITRON-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
10
Rows
10
Columns
270
chassisTable
table.1.3.6.1.4.1.7342.1.1
·
1 row entry
·
21 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk chassisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::chassisTable'
This a table of chassis and their modules.
Chassis modules.
Indexes
| Column | Syntax | OID |
|---|---|---|
| chassisnumThe chassis where the module resides. Ranges in value from 1 - 19. | Integer32 Constraints: range: 1-19 | .1.3.6.1.4.1.7342.1.1.1.1 |
| slotnumThe slot number of the module. For the 19 slot chassis it ranges in value from 1-22. For the 2 slot chassis it ranges in value from 1-2. | Integer32 Constraints: range: 1-22 | .1.3.6.1.4.1.7342.1.1.1.2 |
| chassistypeType of chassis: 1 = 19 module chassis 2 = 2 module chassis 3 = 5 module chassis 4 = 1 module chassis 5 = stand alone chassis 6 = 1-module redundant power chassis | Integer32 Constraints: range: 1-6 | .1.3.6.1.4.1.7342.1.1.1.3 |
| prodtypeThe product type of the module: 61 = iConverter NMM 64 = iConverter Power Supply (19 Module) 65 = iConverter 10FL/T Ethernet 66 = iConverter 100 Fx/Tx Ethernet 67 = iConverter Fiber/Fiber 68 = iConverter 10/100 Ethernet… | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.7342.1.1.1.4 |
| chassisnameThe name of the chassis that is used to set and get names from other modules in the chassis. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.7342.1.1.1.5 |
| partnumThe part number of the module. | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.1.1.1.6 |
| serialnumThe serial number of the module. | OctetString Constraints: range: 8-8 | .1.3.6.1.4.1.7342.1.1.1.7 |
| manufdateThe date the module was manufactured in form YYYYMMDD. | OctetString Constraints: range: 8-8 | .1.3.6.1.4.1.7342.1.1.1.8 |
| softrevThe software revision of the module software. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.7342.1.1.1.9 |
| prodrevThe product revision of the module. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.7342.1.1.1.10 |
| ledstatThe status of any first 32 LEDs on the module, excluding the power LED. If an LED is missing its number is skipped. For an eight LED position device the following is the decoding: ledstat.7 is the top LED… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.11 |
| switchstatThe status of any DIP switches on the module. DIP switch 1 is switchstat.0, DIP switch 2 is switchstat.1, DIP switch 3 is switchstat.2, etc. DIP switch bank 1 is switches 0-7 DIP switch bank 2 is switches… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.12 |
| extended1General extended status for the module. Normally this is the actual setting of the DIP switch selection. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.13 |
| extended2General extended status for the module | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.14 |
| extended3General extended status for the module | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.15 |
| extended4General extended status for the module | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.16 |
| extended5General extended status for the module | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.17 |
| extended6General extended status for the module | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.18 |
| resetmodWriting to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the back… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.19 |
| wrswitchWriting to this variable updates the module switch settings. See switchstat above for the explanation. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.1.1.1.20 |
| modulenameThe name of the module | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.7342.1.1.1.21 |
moduleTable
table.1.3.6.1.4.1.7342.2.1.2
·
1 row entry
·
35 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk moduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::moduleTable'
This a table of modules in the enhances chassis table. It contains as many entries as specified by moduleCount
Chassis modules.
Indexes
| Column | Syntax | OID |
|---|---|---|
| modchassnumThe chassis where the module resides. | Integer32 Constraints: range: 1-19 | .1.3.6.1.4.1.7342.2.1.2.1.1 |
| modslotnumThe slot number within a chassis. | Integer32 Constraints: range: 1-22 | .1.3.6.1.4.1.7342.2.1.2.1.2 |
| modchasstypeThe type of chassis in which the module resides. | Integer32 Constraints: range: 1-6 | .1.3.6.1.4.1.7342.2.1.2.1.3 |
| modprodtypeThe chassis where the module resides. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.7342.2.1.2.1.4 |
| modsoftrevThe modules software revision. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.5 |
| modprodrevThe modules product revision. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.6 |
| modresetWriting to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the back… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.7 |
| modnumportsThe number of ports in this module. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.8 |
| modchassnameThe name of the chassis in which the individual module resides in. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed di… | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.7342.2.1.2.1.9 |
| modpartnumThe model of the individual module. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.7342.2.1.2.1.10 |
| modserialnumThe serial number of the individual module. | OctetString Constraints: range: 8-8 | .1.3.6.1.4.1.7342.2.1.2.1.11 |
| modmanufdateThe manufacturing date of the individual module. | OctetString Constraints: range: 8-8 | .1.3.6.1.4.1.7342.2.1.2.1.12 |
| modnameThe name of the individual module. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.7342.2.1.2.1.13 |
| modportvlanThe portvlan map of an individual module. The low order bits encode the possible values. The following are the connection paths that exists between the ports on the module: Used on types 69, 72, 81, 83, 84, 86 … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.14 |
| modextfeaturebitsThe module's extended features bits. The bit definitions are: bit0 - module is capable of being field upgradeable bit1 - module supports MIB Statistics bit2 - module supports Memory I/O extended registers bit3 - module … | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.15 |
| modswbuildnumThe module's software build number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.16 |
| modenable802dot1qProcessingEnables or disables 802_1q processing. 0 = disable 1 = enable | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.17 |
| modtagsubstitutionEnables or disables substitution of 802_1q tags. Currently not implemented by any supported module | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.18 |
| modcommitVLANchangesVLAN information is applied to the module and data saved to persistent storage. This variable is a write only. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.19 |
| modvlanTableClearVLAN table for the module Vlan table to be cleared. This variable is a write only. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.20 |
| modcommitNMMCfgChangesManagement module configuration information is applied to the module and data saved to persistent storage. This variable is a write only. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.21 |
| modLM80volts8 bits each of PS1 Voltage(msB), PS2 Voltage, Total Voltage and an unused byte(lsB). 1-module redundant power chassis. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.22 |
| modLM80currents8 bits each of PS1 Current(msB) (mA/10), PS2 Current, Total Current and an unused byte(lsB). 1-module redundant power chassis. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.23 |
| modLM80misc8 bits each of Temperature(msB) .5C/bit and 2 unused byte(lsB). 1-module redundant power chassis. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.24 |
| modRestoreFactoryDefaultsManagement module configuration information is restored to factory defaults. This variable is a write only. Different types of restore defaults are supported: restoreFactoryDefaults(0,1) Restores fac… | Integer32r/w Constraints: range: 0-6 | .1.3.6.1.4.1.7342.2.1.2.1.25 |
| coreStatusOnlyEnable(1) or disable(0) Core Status Only. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.2.1.26 |
| ingressPolicingTypeSets the module global policy used to count bytes for bandwidth calculation purposes. This is available on the GM3 & GM4. This is not available on the XM5. 1 = L1 includes all bytes in frame, interframe g… | Integer32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.7342.2.1.2.1.27 |
| vlanservicetagValue for service tag. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.28 |
| defaultForwardingMapBit vector for default forwarding map where: bit0 - Port 1 bit1 - Port 2 bit2 - Port 3 bit3 - Port 4 bit4 - Port BPA bit5 - Port BPB | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.2.1.29 |
| modFpgaRevThe current revision of the FPGA. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.2.1.30 |
| modExpPartNumberThe expanded part number of the individual module. The modpartnum object indicates the compressed version of the part number name. If this field is not supported in a module it is left as a null length st… | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.2.1.31 |
| modExpSoftwareRevThe expanded software revision of the individual module. This object allows for an enhanced version of the software revision that include a major and minor component. Major and Minor are always numeric va… | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.2.1.32 |
| modExpLedStatusThis object is the expanded LED status of the individual module. This object reflects the state, color, and blinking rate of each individual LED. Each LED is represented by a single octet. The first octet… | OctetString | .1.3.6.1.4.1.7342.2.1.2.1.33 |
| modHwRevThe current hardware revision of the module. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.2.1.34 |
| modPcbRevThe current PCB revision of the module. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.2.1.35 |
moduleMgtCfgTable
table.1.3.6.1.4.1.7342.2.1.3
·
1 row entry
·
70 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk moduleMgtCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::moduleMgtCfgTable'
This is a table of the management module configuration variables.
Chassis modules.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sysAdminStatusThis variable provides the status for a management module's ability to make changes to the system. In backplane slave, a management module cannot make system modification. Modifications must be performed from a managem… | Integer32 Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.1 | ||||||||||
| sysDateTimeThis variable provides the date and time in display format: nn/dd/yyyy hh:mm:ss where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year hh - 2 digit hour 0-23, mm = 2 digit minutes 0-59, ss = 2 digit secs … | OctetStringr/w Constraints: range: 19-19 | .1.3.6.1.4.1.7342.2.1.3.1.2 | ||||||||||
| macAddrMAC address of the management module | OctetString Constraints: range: 17-17 | .1.3.6.1.4.1.7342.2.1.3.1.3 | ||||||||||
| ipAddrManagement address 1 IPv4 address | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.4 | ||||||||||
| subnetmaskManagement address 1 IPv4 subnet mask | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.5 | ||||||||||
| gatewayManagement address 1 IPv4 gateway address | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.6 | ||||||||||
| readCommunitySNMPv1/v2c read community name. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.3.1.7 | ||||||||||
| writeCommunitySNMPv1/v2c write community name. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.3.1.8 | ||||||||||
| mychassnumNMMs chassis number. | Integer32r/w Constraints: range: 1-19 | .1.3.6.1.4.1.7342.2.1.3.1.9 | ||||||||||
| mmnameManagement Modules chassis name. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 255 octets when a module is accessed directly through the serial port, o… | OctetStringr/w Constraints: range: 0-255 | .1.3.6.1.4.1.7342.2.1.3.1.10 | ||||||||||
| traphost1This object is the trap host 1 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.11 | ||||||||||
| traphost2This object is the trap host 2 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.12 | ||||||||||
| traphost3This object is the trap host 3 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.13 | ||||||||||
| traphost4This object is the trap host 4 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.14 | ||||||||||
| traphost5This object is the trap host 5 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.15 | ||||||||||
| traphost6This object is the trap host 6 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.16 | ||||||||||
| traphost7This object is the trap host 7 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.17 | ||||||||||
| traphost8This object is the trap host 8 IPv4 address. Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.18 | ||||||||||
| syslocManagement Modules system location. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port,… | OctetStringr/w Constraints: range: 0-255 | .1.3.6.1.4.1.7342.2.1.3.1.19 | ||||||||||
| sysconManagement Modules system Contact information. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the s… | OctetStringr/w Constraints: range: 0-255 | .1.3.6.1.4.1.7342.2.1.3.1.20 | ||||||||||
| serialpassSerial interfacce password for M2 and M3 modules | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.3.1.21 | ||||||||||
| telnetpassTelnet and SSH plain text password for the M2 and M3 modules | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.3.1.22 | ||||||||||
| ftppasswrdFTP password for the M2 and M3 modules | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.7342.2.1.3.1.23 | ||||||||||
| keepAliveIntervalThis the interval used by the NMM to send out keep alive traps. | Integer32r/w Constraints: range: 10-600 | .1.3.6.1.4.1.7342.2.1.3.1.24 | ||||||||||
| vlanIdOstManagement module VLAN tagged packet ID. | OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095 | .1.3.6.1.4.1.7342.2.1.3.1.25 | ||||||||||
| nmmCfgSerialBaudrateThis variable defines the baud rate for the serial interface to the NMM. Where: 1 = 300 bps 2 = 1200 bps 3 = 2400 bps 4 = 4800 bps 5 = 9600 bps 6 = 19200 bps 7 = 38400 bps 8 = 57600 bps 9 = 115200 bps | Integer32r/w Constraints: range: 1-9 | .1.3.6.1.4.1.7342.2.1.3.1.26 | ||||||||||
| enabledFunctionsThis variable defines which special functions are enabled at the NMM. Where: 0x01 = Keep Alive trap enabled 0x02 = Telnet enabled 0x04 = FTP enabled 0x08 = switch reload enabled 0x10 = VLAN enabled 0x2… | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.7342.2.1.3.1.27 | ||||||||||
| enableSNMPFunctionThis variable defines whether the SNMP Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.28 | ||||||||||
| nmmCfgStateThis variable defines the state of the configuration changes made to the NMM. Where: 0x00 = No changes 0x02 = Changes Pending (not saved in Flash) 0x04 = Saved in Flash, Pending NMM reboot | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.3.1.29 | ||||||||||
| nmmSecureModeThis variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS. Where: 0x00 = No Secure Communications 0x01 = Secure Proxy 0x02 = Secure Slave 0x03 = Secure Master | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.3.1.30 | ||||||||||
| nmmSecureConnStateThis variable returns the secure connection state between the proxy and secure slave. Where: 0x00 = Not connected 0x01 = Connection Pending 0x02 = Connection established 0x03 = Connection terminating | Integer32 Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.3.1.31 | ||||||||||
| nmmIpProtocolStateThis variable defines whether the IP protocol is active or disabled. 0 = Active 1 = Disabled | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.7342.2.1.3.1.32 | ||||||||||
| nmmIpDisabledThis variable defines the configuration value for IP protocol's desired state. 0 = ipActive 1 = ipDisabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.33 | ||||||||||
| vlanPriManagement module VLAN tagged packet priority. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.7342.2.1.3.1.34 | ||||||||||
| enableSNMPWritesPermit SNMP SET operations. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.35 | ||||||||||
| cpuVoltageInvoltage input to cpu. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.3.1.36 | ||||||||||
| cpuVoltageOutVoltage out from the cpu. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.3.1.37 | ||||||||||
| cpuTemperatureThe ambient temperature of the CPU. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.3.1.38 | ||||||||||
| nmmSecureSlaveSlotThe slot number of the secure slave in the remote chassis when configured for SECURE COMMUNICATIONS. | Integer32 Constraints: range: 0-19 | .1.3.6.1.4.1.7342.2.1.3.1.39 | ||||||||||
| dhcpIpAddrThis object is the IPv4 address as returned by the DHCP server | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.40 | ||||||||||
| dhcpSubnetmaskThis object is the IPv4 subnet mask as returned by the DHCP server | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.41 | ||||||||||
| dhcpGatewayThis object is theIPv4 gateway address as returned by the DHCP server | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.42 | ||||||||||
| nmmOAMmgmtModeThis variable configures the protocol the Management module will use to communicate with remote chassis when operating in secure mode. Where: 0x01 = (OAM_OFF) No Secure Communications protocol 0x02 = (Auto S… | Integer32r/w Constraints: range: 1-5 | .1.3.6.1.4.1.7342.2.1.3.1.43 | ||||||||||
| customertagValue for customer tag. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.7342.2.1.3.1.44 | ||||||||||
| servicetagValue for service tag. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.7342.2.1.3.1.45 | ||||||||||
| cnodeControlControls whether the module is operating as a Cnode. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.46 | ||||||||||
| cnodeCIRCnode CIR Where: 1 = 64 Kbps 2 = 128 Kbps 3 = 192 Kbps | Integer32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.7342.2.1.3.1.47 | ||||||||||
| enableSNMPv3FunctionThis variable defines whether the SNMPv3 Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.48 | ||||||||||
| slaveWriteThis variable defines whether the module should be allowed to make configurations to itself when in the chassis slave mode. Where: 00 = slaveWrite disabled 01 = slaveWrite enabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.49 | ||||||||||
| snmpTrapTypeThis variable defines which version of SNMP traps are supported, where: 1 = SNMPv1 traps 2 = SNMPv2c traps 3 = SNMPv3 traps | Integer32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.7342.2.1.3.1.50 | ||||||||||
| capsMaskCapablility bits for this management module. | Unsigned32 Constraints: range: 0-4294967295 | .1.3.6.1.4.1.7342.2.1.3.1.51 | ||||||||||
| slaveTrapsThis variable defines whether the module should be allowed to transmit traps out ethernet ports eventhough it is not a chassis master. Where: 00 = slaveTraps disabled 01 = slaveTraps enabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.52 | ||||||||||
| slaveTrapsForwardThis variable defines whether the module should be allowed to forward traps to the chassis master when module is a chassis slave. Default is forward. Where: 00 = slaveTrapsForward disabled 01 = slaveTrapsForward ena… | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.3.1.53 | ||||||||||
| ipAddr2Management address 2 IPv4 address | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.54 | ||||||||||
| subnetmask2Management address 2 IPv4 subnet mask | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.55 | ||||||||||
| gateway2Management address 2 IPv4 gateway address | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.56 | ||||||||||
| ipaddrEVCassociation*** This object is deprecated *** | OctetStringr/w Constraints: range: 0-45 | .1.3.6.1.4.1.7342.2.1.3.1.57 | ||||||||||
| ipaddr2EVCassociation*** This object is deprecated *** | OctetStringr/w Constraints: range: 0-45 | .1.3.6.1.4.1.7342.2.1.3.1.58 | ||||||||||
| bootpEnableEnable or disable BOOTP. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.7342.2.1.3.1.59 | ||||||||||
| tftpEnableEnable or disable TFTP. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.7342.2.1.3.1.60 | ||||||||||
| tftpServerIpAddressThis object is the TFTP IPv4 address. Setting this object also impacts the tftpServerIpAddressString returned value. If an IPv4 address is written to this object the two objects return the same value. … | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.61 | ||||||||||
| dhcptftpServerIpAddressTFTP Server IPv4 address as returned by the DHCP Server | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.7342.2.1.3.1.62 | ||||||||||
| tftpFileNameSelects the TFTP file name. | OctetStringr/w Constraints: range: 1-23 | .1.3.6.1.4.1.7342.2.1.3.1.63 | ||||||||||
| modeTypeSets the module Mode Type to normal, AP, or SP. | OMNITRON-TC-MIBOstModeTyper/w Type Values:
| .1.3.6.1.4.1.7342.2.1.3.1.64 | ||||||||||
| dhcpPortNumberSets the DHCP port number. 2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B 3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B 5 ports and higher modules: 1=None, 2..n+1 = Port 1..n | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.3.1.65 | ||||||||||
| dhcpTagVidThis object configures the DHCP Tag VLAN ID. | OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095 | .1.3.6.1.4.1.7342.2.1.3.1.66 | ||||||||||
| trapSrcIpSelectSelects the trap source address, IP1(1) or IP2(2). | Unsigned32r/w Constraints: range: 1-2 | .1.3.6.1.4.1.7342.2.1.3.1.67 | ||||||||||
| muxGroupDefaultsThis object when written sets the Mux Grouping defaults for a management module. When read the value always returns 'false'. Writing this sets the Mux Group EVC and bandwidth profile configurations. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.7342.2.1.3.1.68 | ||||||||||
| portFwdCpuThis object enables forwarding of managment traffic from the selected ports only for M2 modules only. Management traffic from ports not defined is dropped. all(0) Management traffic f… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.3.1.69 | ||||||||||
| portFwdCpuListThis object enables forwarding of managment traffic from the selected ports only for M3, M4, and M5 modules only. Management traffic from ports not defined is dropped. | OMNITRON-TC-MIBOstPortListr/w | .1.3.6.1.4.1.7342.2.1.3.1.70 |
modulePortsTable
table.1.3.6.1.4.1.7342.2.1.4
·
1 row entry
·
21 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk modulePortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::modulePortsTable'
This a table of Ports per module. There are as many entries as specified by modnumports in the moduleEntry
Ports per module table.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| portnumUsed to get or set state of port. | OMNITRON-TC-MIBOstPortNumber Type Constraints: range: 0..99 | .1.3.6.1.4.1.7342.2.1.4.1.1 | ||||||||
| portStateUsed to get or set state of port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.4.1.2 | ||||||||
| portEgressRateUsed to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.4.1.3 | ||||||||
| portpriorityUsed to get or set port user-priority. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.7342.2.1.4.1.4 | ||||||||
| portcanonicalformatIndicatorUsed to get or set port cfi. Currently not used and defaulted to 0 | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.5 | ||||||||
| portvlanidentifierUsed to get or set port VID. | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.7342.2.1.4.1.6 | ||||||||
| portmlistcriteriaUsed to get or set port membership criteria. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.7 | ||||||||
| portingresssecurityUsed to get or set port ingress security. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.8 | ||||||||
| portegresspolicyUsed to get or set port egress policy. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.7342.2.1.4.1.9 | ||||||||
| portIngressRateUsed to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.4.1.10 | ||||||||
| portSpeedUsed to get the port speed. 0 = undefined 1 = speed10Mbps 2 = speed100Mbps 3 = speed1Gbps 4 = speed10Gbps | Integer32 Constraints: range: 0-4 | .1.3.6.1.4.1.7342.2.1.4.1.11 | ||||||||
| portUnidirectionalAhOamEnableUsed to get/set the unidirectional support. 0 = uniDisabled 1 = uniEnabled | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.12 | ||||||||
| portIngressRateDropOrPauseUsed to get/set behavior on overflow. 0 = undefined 1 = inDrop 2 = inPause | Integer32r/w Constraints: range: 0-2 | .1.3.6.1.4.1.7342.2.1.4.1.13 | ||||||||
| portIngressRateCBSUsed to get or set the port throughput limit selection. | Integer32r/w Constraints: range: 5-256000 | .1.3.6.1.4.1.7342.2.1.4.1.14 | ||||||||
| portL2CPmgntProcessingUsed to get or set the port L2Cp processing method. 0 = undefined 1 = inDrop 2 = inForward 3 = inTunnel | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.4.1.15 | ||||||||
| portEgressQosPolicyUsed to get or set the port egress QoS Policy. 0 = undefined 1 = fairWeight 2 = starving | Integer32r/w Constraints: range: 0-2 | .1.3.6.1.4.1.7342.2.1.4.1.16 | ||||||||
| portAccessTypeUsed to get or set the port access type. 0 = undefined 1 = tunnel 2 = access 3 = trunk | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.4.1.17 | ||||||||
| portStatsClearUsed to clear the statistics table for this port | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.18 | ||||||||
| portLinkStateReports the link state of the port. 0 = No link 1 = Linked | Integer32 Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.4.1.19 | ||||||||
| portDuplexThe object indcates the linked port duplex mode. undefined(0) Port is not linked or state of duplex is unknown halfDuplex(1) Port is linked at half duplex fullDuplex(2) Port is linke… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.4.1.20 | ||||||||
| portMacAddressMAC address of the port. If a MAC address doesn't exist on a port the value returned is all zeros. | OctetString Constraints: range: 17-17 | .1.3.6.1.4.1.7342.2.1.4.1.21 |
portStatsTable
table.1.3.6.1.4.1.7342.2.1.5
·
1 row entry
·
40 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::portStatsTable'
This a table of Statistics per port.
extended module statitical information.
Indexes
| Column | Syntax | OID |
|---|---|---|
| txOctetsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.1 |
| txDropPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.2 |
| txBroadcastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.3 |
| txMulticastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.4 |
| txUnicastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.5 |
| txGoodPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.6 |
| txErrorPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.7 |
| txPausePktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.8 |
| txCollisionsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.9 |
| txSingleCollisionStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.10 |
| txMultipleCollisionStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.11 |
| txDeferedTransmitStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.12 |
| txLateCollisionStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.13 |
| txExcessiveCollisionStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.14 |
| txDroppedEventsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.15 |
| rxOctetsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.16 |
| rxDropPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.17 |
| rxBroadcastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.18 |
| rxMulticastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.19 |
| rxUnicastPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.20 |
| rxGoodPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.21 |
| rxTotalPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.22 |
| rxErrorPktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.23 |
| rxPausePktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.24 |
| rxUndersizePktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.25 |
| rxOversizePktsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.26 |
| rxFragmentsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.27 |
| rxJabbersStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.28 |
| rxAlignmentErrorsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.29 |
| rxFCSErrorsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.30 |
| rxSymbolErrorsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.31 |
| rxCRCAlignErrorsStatistics counter - Object name explains its usage. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.32 |
| rxPackets64Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.33 |
| rxPackets65to127Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.34 |
| rxPackets128to255Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.35 |
| rxPackets256to511Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.36 |
| rxPackets512to1023Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.37 |
| rxPackets1024to1518Statistics counter - packets of octet count in object name. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.5.1.38 |
| txOctets6464 bit octet transmission counter. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.7342.2.1.5.1.39 |
| rxOctets6464 bit octet receive counter. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.7342.2.1.5.1.40 |
moduleVLANTable
table.1.3.6.1.4.1.7342.2.1.6
·
1 row entry
·
9 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk moduleVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::moduleVLANTable'
This a table of VLAN entries per module. There is a maximum of 64 valid entries in the table
VLAN module table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| indexUsed to get or set elements in the vlan table entry. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.7342.2.1.6.1.1 |
| validityflagUsed to set or delete a VLAN table entry. 0 = entry does not exists or is to be deleted, 1 = entry to be created or re-activated (in the case the entry was modified, the module needs to be notified of the change. … | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.2 |
| vlanidentifierUsed to set or get the vlan identifier. valid settable range is 0-4095 | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.7342.2.1.6.1.3 |
| port1MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.4 |
| port2MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.5 |
| port3MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.6 |
| port4MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.7 |
| port5MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.8 |
| port6MembershipUsed to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.6.1.9 |
portAHTable
table.1.3.6.1.4.1.7342.2.1.7
·
1 row entry
·
37 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk portAHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::portAHTable'
This is a table of AH parameter entries per port.
AH port table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ahEnabledUsed to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.7.1.1 | ||||
| ahLpbkModeUsed to get or set the state of the OAM remote loopback. 0 = off - remote loopback is not active 1 = on - remote loopback has been activated | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.7.1.2 | ||||
| ahLocalModeUsed to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSI… | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.7.1.3 | ||||
| ahRemoteModeUsed to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSI… | Integer32 Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.7.1.4 | ||||
| ahLocalMuxStateUsed to get local multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames | Integer32 Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.7.1.5 | ||||
| ahRemoteMuxStateUsed to get remote multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames | Integer32 Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.7.1.6 | ||||
| ahLocalParserStateUsed to get local parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Parse… | Integer32 Constraints: range: 0-2 | .1.3.6.1.4.1.7342.2.1.7.1.7 | ||||
| ahRemoteParserStateUsed to get remote parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Pars… | Integer32 Constraints: range: 0-2 | .1.3.6.1.4.1.7342.2.1.7.1.8 | ||||
| ahLocalSupportVarUsed to get local configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable R… | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.7342.2.1.7.1.9 | ||||
| ahLocalLinkFlagsUsed to get Link Event status in bit encoded value. where: bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating … | Integer32 Constraints: range: 0-127 | .1.3.6.1.4.1.7342.2.1.7.1.10 | ||||
| ahLocalLpbkTimeoutUsed to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300. | Integer32r/w Constraints: range: 0-300 | .1.3.6.1.4.1.7342.2.1.7.1.11 | ||||
| ahRemoteSupportVarUsed to get remote configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable … | Integer32 Constraints: range: 0-31 | .1.3.6.1.4.1.7342.2.1.7.1.12 | ||||
| ahRemoteLinkFlagsUsed to get Link Event status in bit encoded value. bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating bit6 = Remote Stable | Integer32 Constraints: range: 0-127 | .1.3.6.1.4.1.7342.2.1.7.1.13 | ||||
| ahRemoteLpbkTimeoutUsed to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300. | Integer32 Constraints: range: 0-300 | .1.3.6.1.4.1.7342.2.1.7.1.14 | ||||
| ahLocalOUIUsed to get the Organizational Unique ID of the local port. | OctetString Constraints: range: 3-3 | .1.3.6.1.4.1.7342.2.1.7.1.15 | ||||
| ahRemoteOUIUsed to get the Organizational Unique ID of the remote port. | OctetString Constraints: range: 3-3 | .1.3.6.1.4.1.7342.2.1.7.1.16 | ||||
| ahErroredSymbolPeriodWindowUsed to get or set errored symbol period window for the local port. | Unsigned32r/w Constraints: range: 0-60 | .1.3.6.1.4.1.7342.2.1.7.1.17 | ||||
| ahErroredSymbolPeriodThresholdUsed to get or set errored symbol period threshold for the local port. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.18 | ||||
| ahErroredFrameWindowUsed to get or set the errored symbol window for the local port. | Unsigned32r/w Constraints: range: 0-60 | .1.3.6.1.4.1.7342.2.1.7.1.19 | ||||
| ahErroredFrameThresholdUsed to get or set the errored symbol threshold for the local port. | Unsigned32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.7342.2.1.7.1.20 | ||||
| ahErroredFramePeriodWindowUsed to get or set the errored frame period window for the local port. | Unsigned32r/w Constraints: range: 0-60 | .1.3.6.1.4.1.7342.2.1.7.1.21 | ||||
| ahErroredFramePeriodThresholdUsed to get or set the errored frame period threshold for the local port. | Unsigned32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.7342.2.1.7.1.22 | ||||
| ahErroredFrameSecondsWindowUsed to get or set the errored frame seconds window for the local port. | Unsigned32r/w Constraints: range: 0-900 | .1.3.6.1.4.1.7342.2.1.7.1.23 | ||||
| ahErroredFrameSecondsThresholdUsed to get or set the errored frame seconds threshold for the local port. | Unsigned32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.7342.2.1.7.1.24 | ||||
| ahRemoteLinkPortUsed to get the port number of the remote partner. Value is in the Range 1-5. A zero port number indicates no connection or not supported | Integer32 Constraints: range: 0-5 | .1.3.6.1.4.1.7342.2.1.7.1.25 | ||||
| ahSymbolErrorRunningTotalThis object indicates the 802.3ah Symbol Error Running Total value from the last OAM sublayer reset or clear operation. A value of zero indicates that no symbol errors have been detected since the last re… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.26 | ||||
| ahSymbolErrorEventTotalThis object indicates the number of 802.3ah Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.27 | ||||
| ahFrameErrorRunningTotalThis object indicates the sum of the 802.3ah errored frames that have been detected since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have been detected… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.28 | ||||
| ahFrameErrorEventTotalThis object indicates the number of 802.3ah Errored Frame Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.29 | ||||
| ahFramePeriodRunningTotalThis object indicates the sum of 802.3ah the frame errors that have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.30 | ||||
| ahFramePeriodEventTotalThis object indicates the number of 802.3ah Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no E… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.31 | ||||
| ahFrameSecondsSummaryRunningTotalThis object indicates the sum of the 802.3ah errored frame seconds that have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored fra… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.32 | ||||
| ahFrameSecondsSummaryEventTotalThis object indicates the number of 802.3ah Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.7.1.33 | ||||
| ahClearStatisticsThis object when written clears the 802.3ah statistic counters associated with a specific port. When read the value always returns 'false'. Writing this value does not change any items in the configuratio… | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.7342.2.1.7.1.34 | ||||
| ahTransmissionRateThis object sets maximum 802.3ah PDU transmission rate. The default value is 10 (10 frames per second) | Frames/secUnsigned32r/w Constraints: range: 5-100 | .1.3.6.1.4.1.7342.2.1.7.1.35 | ||||
| ahCriticalEventModeUsed to get or set the state of the local critical event mode. 0 = local critical events not enabled 1 = local critical events are enabled | Unsigned32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.7342.2.1.7.1.36 | ||||
| ahCriticalEventTrapListUsed to the SNMP traps which will cause the generation of a local critical event. It is a list of zero or more trap numbers separated by a comma or range, '..'. Example values: 5 5,110,112 100..110 5,… | OctetStringr/w Constraints: range: 0-45 | .1.3.6.1.4.1.7342.2.1.7.1.37 |
portSFPTable
table.1.3.6.1.4.1.7342.2.1.8
·
1 row entry
·
16 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk portSFPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::portSFPTable'
This is a table of AH parameter entries per port.
SFP port table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| portSFPstatusUsed to get present or absence of SFP device. 0 = undefined 1 = notPresent 2 = present | Integer32 Constraints: range: 0-2 | .1.3.6.1.4.1.7342.2.1.8.1.1 |
| portSFPpageA0Used to get SFP device EEPROM address A0 | OctetString Constraints: range: 0-256 | .1.3.6.1.4.1.7342.2.1.8.1.2 |
| portSFPpageA2Used to get SFP device EEPROM address A2 | OctetString Constraints: range: 0-256 | .1.3.6.1.4.1.7342.2.1.8.1.3 |
| portSfpBitRateSFP Bitrate in Mbps | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.2.1.8.1.4 |
| portSfpVendorNameSFP Vendor Name | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.5 |
| portSfpVendorPartNumberSFP Vendor Name | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.6 |
| portSfpVendorSerialNumberSFP Serial Number | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.7 |
| portSfpDateCodeSFP Date Code | OctetString Constraints: range: 0-10 | .1.3.6.1.4.1.7342.2.1.8.1.8 |
| portSfpTemperatureSFP tempearture in degrees Centigrade | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.2.1.8.1.9 |
| portSfpVccSFP VCC in volts | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.2.1.8.1.10 |
| portSfpBiasCurrentSFP Bias Current in millamps | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.2.1.8.1.11 |
| portSfpTxPowerSFP Transmission power in dBm | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.12 |
| portSfpRxPowerSFP Transmission power in dBm | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.13 |
| portSfpTypeSFP type based upon Transceiver Code field. For example: '1000BASE-LX', '1000BASE-T', '10G BASE-SR', etc. | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.7342.2.1.8.1.14 |
| portSfpWavelengthSFP Transmission wavelength in nm | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.7342.2.1.8.1.15 |
| portSfpTxDistanceSFP transmission distance, all non-zero fields displayed. If more than one field is filled displays fields separated by a comma. For example: '12km (9um), 12000m (9um)' '100m (cable)' '30m (OM1), 80m (OM2), 300m (… | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.7342.2.1.8.1.16 |
userTable
table.1.3.6.1.4.1.7342.2.1.9
·
1 row entry
·
6 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk userTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::userTable'
This is a table of SNMPv3 users.
User table entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| userIndexUser table index | Integer32 Constraints: range: 1-4 | .1.3.6.1.4.1.7342.2.1.9.1.1 |
| snmpv3UserNameSNMPv3 user name. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.9.1.2 |
| snmpv3SecurityLevelSNMPv3 security level 0 = undefined 1 = no authentication/no privacy 2 = authentication/no privacy 3 = authentication/privacy | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.7342.2.1.9.1.3 |
| snmpv3AuthPasswordSNMPv3 user authentication password. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.9.1.4 |
| snmpv3PrivPasswordSNMPv3 user privacy password. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.7342.2.1.9.1.5 |
| snmpv3UserTypeSNMPv3 User Type 0 = undefined 1 = admin 2 = read-write 3 = read-only 4 = deny | Integer32r/w Constraints: range: 0-4 | .1.3.6.1.4.1.7342.2.1.9.1.6 |
.1.3.6.1.4.1.7342.2.1.11
·
1 row entry
·
15 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk ostEnvironmentalStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-MIB::ostEnvironmentalStatusTable'
This table supports the module environmental status objects.
This is an environmental table entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ostEnvironmentalPs1StatusThis object indicates the status of Power Supply PS1 or PSA. notApplicable(0) Power Supply PS1/PSA is not supported notInstalled(1) Power Supply PS1/PSA is not installed installedNotPowered… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.11.1.1 | ||||||||
| ostEnvironmentalPs1VoltageInThis object indicates PS1/PSA voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading. | millivoltsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.11.1.2 | ||||||||
| ostEnvironmentalPs1VoltageOutThis object indicates PS1/PSA voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading. | millivoltsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.3 | ||||||||
| ostEnvironmentalPs1CurrentOutThis object indicates PS1/PSA current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading. | milliampsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.4 | ||||||||
| ostEnvironmentalPs2StatusThis object indicates the status of Power Supply PS2 or PSB. notApplicable(0) Power Supply PS2/PSB is not supported notInstalled(1) Power Supply PS2/PSB is not installed installedNotPowered… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.11.1.5 | ||||||||
| ostEnvironmentalPs2VoltageInThis object indicates PS2/PSB voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading. | millivoltsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.11.1.6 | ||||||||
| ostEnvironmentalPs2VoltageOutThis object indicates PS2/PSB voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading. | millivoltsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.7 | ||||||||
| ostEnvironmentalPs2CurrentOutThis object indicates PS2/PSB current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading. | milliampsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.8 | ||||||||
| ostEnvironmentalTemperatureThis object indicates the module internal ambient temperature in degrees centigrade. A value of zero indicates that the current temperature is 0 degrees or the module incapable of supplying a temperature … | degrees centigradeSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.7342.2.1.11.1.9 | ||||||||
| ostEnvironmentalFan1StatusThis object indicates the status of Fan 1. notApplicable(0) Fan 1 is not supported notInstalled(1) Fan 1 is not installed installedNotPowered(2) Fan 1 is installed, but not powered install… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.11.1.10 | ||||||||
| ostEnvironmentalFan1SpeedThis object indicates the speed of Fan 1 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. | rpmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.11 | ||||||||
| ostEnvironmentalFan2StatusThis object indicates the status of Fan 2. notApplicable(0) Fan 2 is not supported notInstalled(1) Fan 2 is not installed installedNotPowered(2) Fan 2 is installed, but not powered install… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.11.1.12 | ||||||||
| ostEnvironmentalFan2SpeedThis object indicates the speed of Fan 2 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. | rpmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.13 | ||||||||
| ostEnvironmentalFan3StatusThis object indicates the status of Fan 3. notApplicable(0) Fan 3 is not supported notInstalled(1) Fan 3 is not installed installedNotPowered(2) Fan 3 is installed, but not powered install… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.7342.2.1.11.1.14 | ||||||||
| ostEnvironmentalFan3SpeedThis object indicates the speed of Fan 3 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. | rpmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.7342.2.1.11.1.15 |