nnethernetDescr
NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB ·
.1.3.6.1.4.1.562.73.1.1.2.4.1.1.2
Object
column
r/w
OctetString
Brief description of the ethernet.The maximum length of this parameter is 25 characters.
Context
- MIB
- NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.2.4.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nnethernetTableEntry
- Table
- nnethernetTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-25
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnethernetId deprecated ethernetId is the identifier for the
ethernet interfaces. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.1 |
| nnethernetSubnetMask The ethernet subnet mask. The parameters
ethernetIpAddr
and ethernetSubnetMask have to be set together,giving
first IpAddress and then Subnetmask, in a same request.
Unless an Ip… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.10 |
| nnethernetIpDirectedBroadcastEnable This object toggles the IP directed braodcast mode
for a particular Ethernet interface. The default
mode is unreachable disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.11 |
| nnethernetIpMulticast Specifies the multicast type. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.12 |
| nnethernetMtu Specifies the message transfer size. It has a
range of 64-4072. The default value is 1500. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.13 |
| nnethernetSpeed Specifies the ethernet speed. The values are
10 or 100 or auto. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.14 |
| nnethernetMode Specifies the ethernet mode to be half-duplex
or full-duplex. The default value is half-duplex. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.15 |
| nnethernetShutdownEnable This object when enabled shuts down the particular
Ehternet interface. Default value is disabled.
Both cannot be shutdown at same time. Either of the
two Ethernet interfaces, wi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.16 |
| nnethernetVlanId Vlan Tagging enabled in VLAN forwarding mode
for this Id. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.17 |
| nnethernetRowStatus RowStatus is used to add/delete
a row in the table. Adding or deleting a row
corresponds to creating or deleting an ethernet
entry. In order to add a row to the ethernet
table, a… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.18 |
| nnethernetDropPackets The total number of drop packet statistics for the LAN interface
when the box encounters packet drops like Tunnel encapsulation errors, VLAN packets
dropped due to QoS (classific… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.19 |
| nnethernetDhcpRelayServerAddr The DHCP relay server Ipaddress. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.3 |
| nnethernetDhcpRelayGatewayAddr The DHCP relay gateway address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.4 |
| nnethernetFailOverEnable This object toggles the failover enable mode for
a particular Ethernet interface. The default mode
is failover disabled. At present this is only
applicable for data using source… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.5 |
| nnethernetHoldDownTime The time, in seconds, that an Ethernet interface
should be in holdDown when it receives an up signal.
In other words, no source forwarding traffic should
be sent on the Ethernet… | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.6 |
| nnethernetIcmpRedirectEnable This object toggles the ICMP redirect mode for
a particular Ethernet interface. The default mode
is redirect disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.7 |
| nnethernetIcmpUnreachableEnable This object toggles the ICMP unreachable mode
for a particular Ethernet interface. The default
mode is unreachable disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.8 |
| nnethernetIpAddr The ethernet IP address. The parameters
ethernetIpAddr
and ethernetSubnetMask have to be set together,giving
first IpAddress and then Subnetmask, in a same request.
Unless an IpA… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.2.4.1.1.9 |