NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
19

nnethernetTable

table
.1.3.6.1.4.1.562.73.1.1.2.4.1 · 1 row entry · 19 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk nnethernetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB::nnethernetTable' 
Ethernet management related
parameters are defined in this table.
nnethernetTableEntry row .1.3.6.1.4.1.562.73.1.1.2.4.1.1
Ethernet management parameters are
listed in this table.
Indexes
Column Syntax OID
nnethernetIddeprecated
ethernetId is the identifier for the
ethernet interfaces.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.1
nnethernetDescr
Brief description of the ethernet.The maximum
length of this parameter is 25 characters.
OctetStringr/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.2
nnethernetDhcpRelayServerAddr
The DHCP relay server Ipaddress.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.3
nnethernetDhcpRelayGatewayAddr
The DHCP relay gateway address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.4
nnethernetFailOverEnable
This object toggles the failover enable mode for
a particular Ethernet interface. The default mode
is failover disabled. At present this is only
applicable for data using source forwarding on an
Ethernet interface. I…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.5
nnethernetHoldDownTime
The time, in seconds, that an Ethernet interface
should be in holdDown when it receives an up signal.
In other words, no source forwarding traffic should
be sent on the Ethernet interface during the holdDown
time per…
Integer32r/w
Constraints:
range: 3-900
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.6
nnethernetIcmpRedirectEnable
This object toggles the ICMP redirect mode for
a particular Ethernet interface. The default mode
is redirect disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.7
nnethernetIcmpUnreachableEnable
This object toggles the ICMP unreachable mode
for a particular Ethernet interface. The default
mode is unreachable disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.8
nnethernetIpAddr
The ethernet IP address. The parameters
ethernetIpAddr
and ethernetSubnetMask have to be set together,giving
first IpAddress and then Subnetmask, in a same request.
Unless an IpAddress and a Subnet mask are not set the…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.9
nnethernetSubnetMask
The ethernet subnet mask. The parameters
ethernetIpAddr
and ethernetSubnetMask have to be set together,giving
first IpAddress and then Subnetmask, in a same request.
Unless an IpAddress and a Subnet mask are not set th…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.10
nnethernetIpDirectedBroadcastEnable
This object toggles the IP directed braodcast mode
for a particular Ethernet interface. The default
mode is unreachable disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.11
nnethernetIpMulticast
Specifies the multicast type.
Enumerationr/w
Enumerated Values:
1pass
2block
3ospfrip2
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.12
nnethernetMtu
Specifies the message transfer size. It has a
range of 64-4072. The default value is 1500.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.13
nnethernetSpeed
Specifies the ethernet speed. The values are
10 or 100 or auto.
Enumerationr/w
Enumerated Values:
1speed-10MBPs
2speed-100MBPs
3speed-Auto
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.14
nnethernetMode
Specifies the ethernet mode to be half-duplex
or full-duplex. The default value is half-duplex.
Enumerationr/w
Enumerated Values:
1half-duplex
2full-duplex
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.15
nnethernetShutdownEnable
This object when enabled shuts down the particular
Ehternet interface. Default value is disabled.
Both cannot be shutdown at same time. Either of the
two Ethernet interfaces, with valid IpAddress, should
be up and ru…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.16
nnethernetVlanId
Vlan Tagging enabled in VLAN forwarding mode
for this Id.
Integer32r/w
Constraints:
range: 1-4098
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.17
nnethernetRowStatus
RowStatus is used to add/delete
a row in the table. Adding or deleting a row
corresponds to creating or deleting an ethernet
entry. In order to add a row to the ethernet
table, a set should be done with the value
4 (c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.18
nnethernetDropPackets
The total number of drop packet statistics for the LAN interface
when the box encounters packet drops like Tunnel encapsulation errors, VLAN packets
dropped due to QoS (classification errors, queuing errors),VLAN packe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.562.73.1.1.2.4.1.1.19