nsnaNsnasSendHelloInterval
NORTEL-SECURE-NETWORK-ACCESS-MIB ·
.1.3.6.1.4.1.45.5.10.1.1.6
Object
scalar
seconds Integer32
The interval for sending SSCP Hello messages for the current SSCP connection. If this period of time passes without any SSCP messages being sent, a Hello message will be generated. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero.
Context
- MIB
- NORTEL-SECURE-NETWORK-ACCESS-MIB
- OID
.1.3.6.1.4.1.45.5.10.1.1.6- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- nsnaScalars
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nsnaEnabled Indicates whether NSNA is globally enabled for the system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.1 |
| nsnaFailOpenEnabled This object indicates whether the Fail-Open feature is currently
enabled on the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.10 |
| nsnaFailOpenVlan This object indicates the current Fail-Open Vlan ID. A value of
0 indicates the value either has not been set, or that the
previous value is no longer valid. | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.10.1.1.11 |
| nsnaFailOpenFilterVlan This object indicates the current Vlan ID whose associated filters
are to be used as the Fail-Open filters. A value of 0 indicates
the value either has not been set, or that the … | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.10.1.1.12 |
| nsnaNsnasConnectionVersion This object indicates the SSCP version being used in the
current NSNAS connection. If there is no current connection,
the value will be 0. | scalar | Integer32 | .1.3.6.1.4.1.45.5.10.1.1.14 |
| nsnaNsnasRadiusServerEnabled This object indicates whether the NSNAS currently connected
to the switch is acting as a RADIUS server. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.15 |
| nsnaNsnasRadiusServerPort If there is an NSNAS currently connected to the switch that
is acting as a RADIUS server, this object returns the port
on which that server listens for RADIUS requests. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.5.10.1.1.16 |
| nsnaNsnasConnectionState Indicates whether the switch currently has a connection to
an NSNAS, whether the switch is currently in the process of
establishing a connection to an NSNAS, or whether an existin… | scalar | Enumeration | .1.3.6.1.4.1.45.5.10.1.1.3 |
| nsnaNsnasInetAddressType If a NSNAS is currently connected to the switch, this indicates
the type of the internet address from which the NSNAS connected.
The contents of nsnaSnasInetAddress will be of thi… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.5.10.1.1.4 |
| nsnaNsnasInetAddress If a NSNAS is currently connected to the switch, this indicates
the internet address from which the NSNAS connected. If there
is not currently a NSNAS connected, this will be an … | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.5.10.1.1.5 |
| nsnaNsnasInactivityInterval The inactivity interval for the current SSCP connection. If this
period of time passes without any SSCP messages being received,
the SSCP connection will be closed. If there is … | scalar | seconds Integer32 | .1.3.6.1.4.1.45.5.10.1.1.7 |
| nsnaNsnasStatusQuoInterval The status-quo interval for the current or last SSCP connection.
If the NSNAS is disconnected from the switch for any reason, the
switch will wait this period of time before movin… | scalar | seconds Integer32 | .1.3.6.1.4.1.45.5.10.1.1.8 |
| nsnaMacAuthenticationEnabled This object indicates whether MAC Authentication is currently
enabled on the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.9 |