NORTEL-SECURE-NETWORK-ACCESS-MIB Table View

The table of subnets from which NSNASs will connect.

nsnaNsnasEntry row .1.3.6.1.4.1.45.5.10.1.2.1

A set of objects that specify a subnet from which NSNASs will
connect, along with related configuration parameters.

Indexes

nsnaNsnasAddressType nsnaNsnasAddress nsnaNsnasAddressMask

Column	Syntax	OID
nsnaNsnasAddressType The type of internet address contained in nsnaNsnasAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.10.1.2.1.1
nsnaNsnasAddress The internet address portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddressMask specifies the subnet of the NSNAS.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.45.5.10.1.2.1.2
nsnaNsnasAddressMask The address mask portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddress specifies the subnet of the NSNAS.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.45.5.10.1.2.1.3
nsnaNsnasPort The port on which NSNASs connecting from this subnet will connect.	Unsigned32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.45.5.10.1.2.1.4
nsnaNsnasRowStatus This object is used for row create/deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.10.1.2.1.5

The table of per-port NSNA configuration parameters.  There must
be an entry in this table for each NSNA-capable port.

nsnaPortEntry row .1.3.6.1.4.1.45.5.10.1.3.1

NSNA configuration parameters for a port.

Indexes

nsnaPortIfIndex

Column	Syntax	OID
nsnaPortIfIndex The ifIndex corresponding to the port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.5.10.1.3.1.1
nsnaPortMode The NSNA mode of the port.	Enumerationr/w Enumerated Values: 1 disabled 2 static 3 dynamic 4 uplink 5 secure	.1.3.6.1.4.1.45.5.10.1.3.1.2
nsnaPortGreenVlanId The green VLAN ID of the port. This value is only used when the corresponding value of nsnaPortMode is static(2). Otherwise, the value will be 0.	NsnaVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.45.5.10.1.3.1.3
nsnaPortVoipVlans The set of VOIP VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is static(2), dynamic(3), or secure(5).	RAPID-CITYIdListr/w	.1.3.6.1.4.1.45.5.10.1.3.1.4
nsnaPortUplinkVlans The set of uplink VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is uplink(4).	RAPID-CITYIdListr/w	.1.3.6.1.4.1.45.5.10.1.3.1.5
nsnaPortState The current NSNA color of the port.	Enumeration Enumerated Values: 1 none 2 red 3 green 4 yellow	.1.3.6.1.4.1.45.5.10.1.3.1.6
nsnaPortDhcpState The DHCP state of the port.	Enumeration Enumerated Values: 1 blocked 2 unblocked	.1.3.6.1.4.1.45.5.10.1.3.1.7
nsnaPortHubModeEnabled Indicates whether Hub Mode is enabled on a port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.5.10.1.3.1.8
nsnaPortHubModeMaxClients The maximum number of clients allowed on a port when Hub Mode is enabled. The value is ignored if Hub Mode is disabled.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.45.5.10.1.3.1.9

The table of per-Vlan NSNA configuration parameters.  There must
be an entry in this table for every Vlan.

nsnaVlanEntry row .1.3.6.1.4.1.45.5.10.1.4.1

NSNA configuration parameters for a Vlan.

Indexes

nsnaVlanId

Column	Syntax	OID
nsnaVlanId The ID of the Vlan.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.10.1.4.1.1
nsnaVlanColor The NSNA color of the Vlan.	Enumerationr/w Enumerated Values: 1 none 2 red 3 green 4 yellow 5 voip	.1.3.6.1.4.1.45.5.10.1.4.1.2
nsnaVlanFilterSetName The name of the filter set associated with the VLAN. An empty value means that no filter set is associated with the VLAN.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.45.5.10.1.4.1.3
nsnaVlanFilterSetId The ID of the filter set associated with the VLAN. A value of 0 means that no filter set is associated with the VLAN.	Integer32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.45.5.10.1.4.1.4
nsnaVlanYellowSubnetType The type of internet address contained in the corresponding instance of nsnaVlanYellowSubnet.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.10.1.4.1.5
nsnaVlanYellowSubnet The yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.5.10.1.4.1.6
nsnaVlanYellowSubnetMask The number of bits in the network mask of the yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4).	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.45.5.10.1.4.1.7

The table of per-client NSNA state information.  There must
be an entry in this table for every NSNA client.

nsnaClientEntry row .1.3.6.1.4.1.45.5.10.1.5.1

State information for an NSNA client.

Indexes

nsnaClientIfIndex nsnaClientMacAddress

Column	Syntax	OID
nsnaClientIfIndex The ifIndex of the port on which the client is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.5.10.1.5.1.1
nsnaClientMacAddress The MAC address of the client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.5.10.1.5.1.2
nsnaClientDeviceType The type of device of the client.	Enumeration Enumerated Values: 0 unknown 1 pc 2 ipPhone 3 passive	.1.3.6.1.4.1.45.5.10.1.5.1.3
nsnaClientVlanId The Vlan ID of the client.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.10.1.5.1.4
nsnaClientAddressType The type of address contained in the corresponding instance of nsnaClientAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.10.1.5.1.5
nsnaClientAddress The IP address of the client.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.45.5.10.1.5.1.6
nsnaClientExpired Indicates whether this client has been aged-out.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.5.10.1.5.1.7
nsnaClientFilterVlanId The Vlan ID whose associated filter set is installed on this port for this client. This is used when MAC Authentication is enabled. If MAC Authentication is no enabled, this object will return the same value as nsnaCl…	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.10.1.5.1.8
nsnaClientStatus The status of this client.	Enumeration Enumerated Values: 1 authenticatedByNsnas 2 authenticatedLocally 3 disallowedByNsnas 4 isolatedByNsnas 5 blacklistedByNsnas	.1.3.6.1.4.1.45.5.10.1.5.1.9

The table of static NSNA client configuration.  This is
used for authenticating clients on static NSNA ports.

nsnaStaticClientEntry row .1.3.6.1.4.1.45.5.10.1.6.1

Static NSNA client configuration.

Indexes

nsnaStaticClientVlanId nsnaStaticClientMacAddress

Column	Syntax	OID
nsnaStaticClientVlanId The VLAN ID in which a client is allowed.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.45.5.10.1.6.1.1
nsnaStaticClientMacAddress The MAC address of an allowed client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.5.10.1.6.1.2
nsnaStaticClientDeviceType The type of device of the allowed client.	Enumerationr/w Enumerated Values: 1 pc 2 ipPhone 3 passive	.1.3.6.1.4.1.45.5.10.1.6.1.3
nsnaStaticClientAddressType The type of address contained in the corresponding instance of nsnaStaticClientAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.5.10.1.6.1.4
nsnaStaticClientAddress The IP address to be used for the allowed client.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.5.10.1.6.1.5
nsnaStaticClientRowStatus Used for row creation/deletion. When creating a row, the corresponding instances of nsnaStaticClientDeviceType, nsnaStaticClientAddressType, and nsnaStaticClientAddress must be set before this object can be made active…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.10.1.6.1.6

The table of IP phone signature string configuration.
This is used for recognizing IP phones.

nsnaIpPhoneSignatureEntry row .1.3.6.1.4.1.45.5.10.1.7.1

IP phone signature string configuration.

Indexes

nsnaIpPhoneSignatureString

Column	Syntax	OID
nsnaIpPhoneSignatureString The signature string of an IP phone.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.45.5.10.1.7.1.1
nsnaIpPhoneSignatureRowStatus Used for row creation/deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.5.10.1.7.1.2