nsnaNsnasInactivityInterval
NORTEL-SECURE-NETWORK-ACCESS-MIB ·
.1.3.6.1.4.1.45.5.10.1.1.7
Object
scalar
seconds Integer32
The inactivity interval for the current SSCP connection. If this period of time passes without any SSCP messages being received, the SSCP connection will be closed. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero.
Context
- MIB
- NORTEL-SECURE-NETWORK-ACCESS-MIB
- OID
.1.3.6.1.4.1.45.5.10.1.1.7- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- nsnaScalars
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nsnaEnabled Indicates whether NSNA is globally enabled for the system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.1 |
| nsnaFailOpenEnabled This object indicates whether the Fail-Open feature is currently
enabled on the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.10 |
| nsnaFailOpenVlan This object indicates the current Fail-Open Vlan ID. A value of
0 indicates the value either has not been set, or that the
previous value is no longer valid. | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.10.1.1.11 |
| nsnaFailOpenFilterVlan This object indicates the current Vlan ID whose associated filters
are to be used as the Fail-Open filters. A value of 0 indicates
the value either has not been set, or that the … | scalar | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.10.1.1.12 |
| nsnaNsnasConnectionVersion This object indicates the SSCP version being used in the
current NSNAS connection. If there is no current connection,
the value will be 0. | scalar | Integer32 | .1.3.6.1.4.1.45.5.10.1.1.14 |
| nsnaNsnasRadiusServerEnabled This object indicates whether the NSNAS currently connected
to the switch is acting as a RADIUS server. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.15 |
| nsnaNsnasRadiusServerPort If there is an NSNAS currently connected to the switch that
is acting as a RADIUS server, this object returns the port
on which that server listens for RADIUS requests. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.5.10.1.1.16 |
| nsnaNsnasConnectionState Indicates whether the switch currently has a connection to
an NSNAS, whether the switch is currently in the process of
establishing a connection to an NSNAS, or whether an existin… | scalar | Enumeration | .1.3.6.1.4.1.45.5.10.1.1.3 |
| nsnaNsnasInetAddressType If a NSNAS is currently connected to the switch, this indicates
the type of the internet address from which the NSNAS connected.
The contents of nsnaSnasInetAddress will be of thi… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.5.10.1.1.4 |
| nsnaNsnasInetAddress If a NSNAS is currently connected to the switch, this indicates
the internet address from which the NSNAS connected. If there
is not currently a NSNAS connected, this will be an … | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.5.10.1.1.5 |
| nsnaNsnasSendHelloInterval The interval for sending SSCP Hello messages for the current SSCP
connection. If this period of time passes without any SSCP
messages being sent, a Hello message will be generate… | scalar | seconds Integer32 | .1.3.6.1.4.1.45.5.10.1.1.6 |
| nsnaNsnasStatusQuoInterval The status-quo interval for the current or last SSCP connection.
If the NSNAS is disconnected from the switch for any reason, the
switch will wait this period of time before movin… | scalar | seconds Integer32 | .1.3.6.1.4.1.45.5.10.1.1.8 |
| nsnaMacAuthenticationEnabled This object indicates whether MAC Authentication is currently
enabled on the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.10.1.1.9 |