nsVrOspfExitOverflowInterval
NETSCREEN-VR-OSPF-MIB ·
.1.3.6.1.4.1.3224.18.5.1.1.13
Object
column
PositiveInteger
The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
Context
- MIB
- NETSCREEN-VR-OSPF-MIB
- OID
.1.3.6.1.4.1.3224.18.5.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nsVrOspfGeneralEntry
- Table
- nsVrOspfGeneralTable
- Siblings
- 14
Syntax
PositiveInteger
- Source
- PositiveInteger
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nsVrOspfRouterId A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of … | column | RouterID | .1.3.6.1.4.1.3224.18.5.1.1.1 |
| nsVrOspfRxNewLsas The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3224.18.5.1.1.10 |
| nsVrOspfExtLsdbLimit The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
Wh… | column | Integer32 | .1.3.6.1.4.1.3224.18.5.1.1.11 |
| nsVrOspfMulticastExtensions A Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3224.18.5.1.1.12 |
| nsVrOspfDemandExtensions The router's support for demand routing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3224.18.5.1.1.14 |
| nsVrOspfGeneralVRID Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048] | column | Integer32 | .1.3.6.1.4.1.3224.18.5.1.1.15 |
| nsVrOspfAdminStat The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one inter-
face; 'disabled' disables it on … | column | Status | .1.3.6.1.4.1.3224.18.5.1.1.2 |
| nsVrOspfVersionNumber The current version number of the OSPF proto-
col is 2. | column | Enumeration | .1.3.6.1.4.1.3224.18.5.1.1.3 |
| nsVrOspfAreaBdrRtrStatus A flag to note whether this router is an area
border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3224.18.5.1.1.4 |
| nsVrOspfASBdrRtrStatus A flag to note whether this router is config-
ured as an Autonomous System border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3224.18.5.1.1.5 |
| nsVrOspfExternLsaCount The number of external (LS type 5) link-state
advertisements in the link-state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3224.18.5.1.1.6 |
| nsVrOspfExternLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the external link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3224.18.5.1.1.7 |
| nsVrOspfTOSSupport The router's support for type-of-service rout-
ing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3224.18.5.1.1.8 |
| nsVrOspfOriginateNewLsas The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3224.18.5.1.1.9 |