NETSCREEN-VR-OSPF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
121

nsVrOspfGeneralTable

table
.1.3.6.1.4.1.3224.18.5.1 · 1 row entry · 15 columns
Open in standard view 
Ospf general information table per VR
nsVrOspfGeneralEntry entry .1.3.6.1.4.1.3224.18.5.1.1
Ospf general information table per VR
Indexes
nsVrOspfGeneralVRID
Column Syntax OID
nsVrOspfRouterId
A 32-bit integer uniquely identifying the
router in the Autonomous System.

By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addres…
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.1.1.1
nsVrOspfAdminStat
The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.
Status
Textual Convention: Status Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.3224.18.5.1.1.2
nsVrOspfVersionNumber
The current version number of the OSPF proto-
col is 2.
Enumeration
Enumerated Values:
2version2
 .1.3.6.1.4.1.3224.18.5.1.1.3
nsVrOspfAreaBdrRtrStatus
A flag to note whether this router is an area
border router.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.1.1.4
nsVrOspfASBdrRtrStatus
A flag to note whether this router is config-
ured as an Autonomous System border router.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.1.1.5
nsVrOspfExternLsaCount
The number of external (LS type 5) link-state
advertisements in the link-state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.1.1.6
nsVrOspfExternLsaCksumSum
The 32-bit unsigned sum of the LS checksums of
the external link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link st…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.1.1.7
nsVrOspfTOSSupport
The router's support for type-of-service rout-
ing.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.1.1.8
nsVrOspfOriginateNewLsas
The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.1.1.9
nsVrOspfRxNewLsas
The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.1.1.10
nsVrOspfExtLsdbLimit
The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.

When the number of non-default AS-external…
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.3224.18.5.1.1.11
nsVrOspfMulticastExtensions
A Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.

Bit 0, if set, indicates that the …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.1.1.12
nsVrOspfExitOverflowInterval
The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-LSAs. When
set to 0, the router will no…
PositiveInteger
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3224.18.5.1.1.13
nsVrOspfDemandExtensions
The router's support for demand routing.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.1.1.14
nsVrOspfGeneralVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.1.1.15

nsVrOspfAreaTable

table
.1.3.6.1.4.1.3224.18.5.2 · 1 row entry · 10 columns
Open in standard view 
Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.
nsVrOspfAreaEntry entry .1.3.6.1.4.1.3224.18.5.2.1
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
Indexes
nsVrOspfAreaVRID nsVrOspfAreaId
Column Syntax OID
nsVrOspfAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.2.1.1
nsVrOspfImportAsExtern
The area's support for importing AS external
link- state advertisements.
Enumerationr/w
Enumerated Values:
1importExternal
2importNoExternal
3importNssa
 .1.3.6.1.4.1.3224.18.5.2.1.3
nsVrOspfSpfRuns
The number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.2.1.4
nsVrOspfAreaBdrRtrCount
The total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.2.1.5
nsVrOspfAsBdrRtrCount
The total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.2.1.6
nsVrOspfAreaLsaCount
The total number of link-state advertisements
in this area's link-state database, excluding
AS External LSA's.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.2.1.7
nsVrOspfAreaLsaCksumSum
The 32-bit unsigned sum of the link-state ad-
vertisements' LS checksums contained in this
area's link-state database. This sum excludes
external (LS type 5) link-state advertisements.
The sum can be used to deter…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.2.1.8
nsVrOspfAreaSummary
The variable nsVrOspfAreaSummary controls the im-
port of summary LSAs into stub areas. It has
no effect on other areas.

If it is noAreaSummary, the router will neither
originate nor propagate summa…
Enumerationr/w
Enumerated Values:
1noAreaSummary
2sendAreaSummary
 .1.3.6.1.4.1.3224.18.5.2.1.9
nsVrOspfAreaStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.2.1.10
nsVrOspfAreaVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.2.1.11

nsVrOspfStubAreaTable

table
.1.3.6.1.4.1.3224.18.5.3 · 1 row entry · 6 columns
Open in standard view 
The set of metrics that will be advertised  by
a default Area Border Router into a stub area.
nsVrOspfStubAreaEntry entry .1.3.6.1.4.1.3224.18.5.3.1
The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.
Indexes
nsVrOspfStubVRID nsVrOspfStubAreaId nsVrOspfStubTOS
Column Syntax OID
nsVrOspfStubAreaId
The 32 bit identifier for the Stub Area. On
creation, this can be derived from the in-
stance.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.3.1.1
nsVrOspfStubTOS
The Type of Service associated with the
metric. On creation, this can be derived from
the instance.
TOSType
Textual Convention: TOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.3224.18.5.3.1.2
nsVrOspfStubMetric
The metric value applied at the indicated type
of service. By default, this equals the least
metric at the type of service among the inter-
faces to other areas.
BigMetricr/w
Textual Convention: BigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.3224.18.5.3.1.3
nsVrOspfStubStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.3.1.4
nsVrOspfStubMetricType
This variable displays the type of metric ad-
vertised as a default route.
Enumerationr/w
Enumerated Values:
1nsVrOspfMetric
2comparableCost
3nonComparable
 .1.3.6.1.4.1.3224.18.5.3.1.5
nsVrOspfStubVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.3.1.6

nsVrOspfLsdbTable

table
.1.3.6.1.4.1.3224.18.5.4 · 1 row entry · 9 columns
Open in standard view 
The OSPF Process's Link State Database.
nsVrOspfLsdbEntry entry .1.3.6.1.4.1.3224.18.5.4.1
A single Link State Advertisement.
Indexes
nsVrOspfLsdbVRID nsVrOspfLsdbAreaId nsVrOspfLsdbType nsVrOspfLsdbLsid nsVrOspfLsdbRouterId
Column Syntax OID
nsVrOspfLsdbAreaId
The 32 bit identifier of the Area from which
the LSA was received.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.4.1.1
nsVrOspfLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
 .1.3.6.1.4.1.3224.18.5.4.1.2
nsVrOspfLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.4.1.3
nsVrOspfLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.4.1.4
nsVrOspfLsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.4.1.5
nsVrOspfLsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.4.1.6
nsVrOspfLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.4.1.7
nsVrOspfLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3224.18.5.4.1.8
nsVrOspfLsdbVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.4.1.9

nsVrOspfHostTable

table
.1.3.6.1.4.1.3224.18.5.6 · 1 row entry · 6 columns
Open in standard view 
The list of Hosts, and their metrics, that the
router will advertise as host routes.
nsVrOspfHostEntry entry .1.3.6.1.4.1.3224.18.5.6.1
A metric to be advertised, for a given type of
service, when a given host is reachable.
Indexes
nsVrOspfHostVRID nsVrOspfHostIpAddress nsVrOspfHostTOS
Column Syntax OID
nsVrOspfHostIpAddress
The IP Address of the Host.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.6.1.1
nsVrOspfHostTOS
The Type of Service of the route being config-
ured.
TOSType
Textual Convention: TOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.3224.18.5.6.1.2
nsVrOspfHostMetric
The Metric to be advertised.
Metricr/w
Textual Convention: Metric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.3224.18.5.6.1.3
nsVrOspfHostStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.6.1.4
nsVrOspfHostAreaID
The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPF in-
terface is in, or 0.0.0.0
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.6.1.5
nsVrOspfHostVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.6.1.6

nsVrOspfIfTable

table
.1.3.6.1.4.1.3224.18.5.7 · 1 row entry · 21 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.
nsVrOspfIfEntry entry .1.3.6.1.4.1.3224.18.5.7.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
Indexes
nsVrOspfIfVRID nsVrOspfIfIpAddress nsVrOspfAddressLessIf
Column Syntax OID
nsVrOspfIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.7.1.1
nsVrOspfAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.7.1.2
nsVrOspfIfAreaId
A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.
AreaIDr/w
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.7.1.3
nsVrOspfIfType
The OSPF interface type.

By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25…
Enumerationr/w
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
 .1.3.6.1.4.1.3224.18.5.7.1.4
nsVrOspfIfAdminStat
The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is extern…
Statusr/w
Textual Convention: Status Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.3224.18.5.7.1.5
nsVrOspfIfRtrPriority
The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designate…
DesignatedRouterPriorityr/w
Textual Convention: DesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3224.18.5.7.1.6
nsVrOspfIfTransitDelay
The estimated number of seconds it takes to
transmit a link state update packet over this
interface.
UpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.3224.18.5.7.1.7
nsVrOspfIfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request …
UpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.3224.18.5.7.1.8
nsVrOspfIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-

terface. This value must be the same for all
routers attached to a common network.
HelloRanger/w
Textual Convention: HelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.3224.18.5.7.1.9
nsVrOspfIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for a…
PositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3224.18.5.7.1.10
nsVrOspfIfPollInterval
The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.
PositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3224.18.5.7.1.11
nsVrOspfIfState
The OSPF Interface State.
Enumeration
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
 .1.3.6.1.4.1.3224.18.5.7.1.12
nsVrOspfIfDesignatedRouter
The IP Address of the Designated Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.7.1.13
nsVrOspfIfBackupDesignatedRouter
The IP Address of the Backup Designated
Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.7.1.14
nsVrOspfIfEvents
The number of times this OSPF interface has
changed its state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.7.1.15
nsVrOspfIfAuthKey
The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.

Note that unauthentica…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3224.18.5.7.1.16
nsVrOspfIfStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.7.1.17
nsVrOspfIfMulticastForwarding
The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NB…
Enumerationr/w
Enumerated Values:
1blocked
2multicast
3unicast
 .1.3.6.1.4.1.3224.18.5.7.1.18
nsVrOspfIfDemand
Indicates whether Demand OSPF procedures (hel-

lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.7.1.19
nsVrOspfIfAuthType
The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3224.18.5.7.1.20
nsVrOspfIfVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.7.1.21

nsVrOspfIfMetricTable

table
.1.3.6.1.4.1.3224.18.5.8 · 1 row entry · 6 columns
Open in standard view 
The TOS metrics for  a  non-virtual  interface
identified by the interface index.
nsVrOspfIfMetricEntry entry .1.3.6.1.4.1.3224.18.5.8.1
A particular TOS metric for a non-virtual in-
terface identified by the interface index.
Indexes
nsVrOspfIfMetricVRID nsVrOspfIfMetricIpAddress nsVrOspfIfMetricAddressLessIf nsVrOspfIfMetricTOS nsVrOspfIfMetricVRID
Column Syntax OID
nsVrOspfIfMetricIpAddress
The IP address of this OSPF interface. On row
creation, this can be derived from the in-
stance.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.8.1.1
nsVrOspfIfMetricAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the value of ifIndex for in-
terfaces having no IP Addres…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.8.1.2
nsVrOspfIfMetricTOS
The type of service metric being referenced.
On row creation, this can be derived from the
instance.
TOSType
Textual Convention: TOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.3224.18.5.8.1.3
nsVrOspfIfMetricValue
The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed.
Metricr/w
Textual Convention: Metric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.3224.18.5.8.1.4
nsVrOspfIfMetricStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.8.1.5
nsVrOspfIfMetricVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.8.1.6

nsVrOspfVirtIfTable

table
.1.3.6.1.4.1.3224.18.5.9 · 1 row entry · 12 columns
Open in standard view 
Information about this router's virtual inter-
faces.
nsVrOspfVirtIfEntry entry .1.3.6.1.4.1.3224.18.5.9.1
Information about a single Virtual Interface.
Indexes
nsVrOspfVirtIfVRID nsVrOspfVirtIfAreaId nsVrOspfVirtIfNeighbor
Column Syntax OID
nsVrOspfVirtIfAreaId
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.9.1.1
nsVrOspfVirtIfNeighbor
The Router ID of the Virtual Neighbor.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.9.1.2
nsVrOspfVirtIfTransitDelay
The estimated number of seconds it takes to
transmit a link- state update packet over this
interface.
UpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.3224.18.5.9.1.3
nsVrOspfVirtIfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state reque…
UpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.3224.18.5.9.1.4
nsVrOspfVirtIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.
HelloRanger/w
Textual Convention: HelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.3224.18.5.9.1.5
nsVrOspfVirtIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for t…
PositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3224.18.5.9.1.6
nsVrOspfVirtIfState
OSPF virtual interface states.
Enumeration
Enumerated Values:
1down
4pointToPoint
 .1.3.6.1.4.1.3224.18.5.9.1.7
nsVrOspfVirtIfEvents
The number of state changes or error events on
this Virtual Link
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.9.1.8
nsVrOspfVirtIfAuthKey
If Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.

Note that unauthenticated interfaces need no
authentication key, and simple password authen-
ticatio…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3224.18.5.9.1.9
nsVrOspfVirtIfStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.9.1.10
nsVrOspfVirtIfAuthType
The authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3224.18.5.9.1.11
nsVrOspfVirtIfVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.9.1.12

nsVrOspfNbrTable

table
.1.3.6.1.4.1.3224.18.5.10 · 1 row entry · 12 columns
Open in standard view 
A table of non-virtual neighbor information.
nsVrOspfNbrEntry entry .1.3.6.1.4.1.3224.18.5.10.1
The information regarding a single neighbor.
Indexes
nsVrOspfNbrVRID nsVrOspfNbrIpAddr nsVrOspfNbrAddressLessIndex
Column Syntax OID
nsVrOspfNbrIpAddr
The IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.10.1.1
nsVrOspfNbrAddressLessIndex
On an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.3224.18.5.10.1.2
nsVrOspfNbrRtrId
A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.10.1.3
nsVrOspfNbrOptions
A Bit Mask corresponding to the neighbor's op-
tions field.

Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.10.1.4
nsVrOspfNbrPriority
The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.
DesignatedRouterPriorityr/w
Textual Convention: DesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3224.18.5.10.1.5
nsVrOspfNbrState
The State of the relationship with this Neigh-
bor.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.3224.18.5.10.1.6
nsVrOspfNbrEvents
The number of times this neighbor relationship
has changed state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.10.1.7
nsVrOspfNbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.10.1.8
nsVrOspfNbmaNbrStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.10.1.9
nsVrOspfNbmaNbrPermanence
This variable displays the status of the en-
try. 'dynamic' and 'permanent' refer to how
the neighbor became known.
Enumeration
Enumerated Values:
1dynamic
2permanent
 .1.3.6.1.4.1.3224.18.5.10.1.10
nsVrOspfNbrHelloSuppressed
Indicates whether Hellos are being suppressed

to the neighbor
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.10.1.11
nsVrOspfNbrVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.10.1.12

nsVrOspfVirtNbrTable

table
.1.3.6.1.4.1.3224.18.5.11 · 1 row entry · 9 columns
Open in standard view 
A table of virtual neighbor information.
nsVrOspfVirtNbrEntry entry .1.3.6.1.4.1.3224.18.5.11.1
Virtual neighbor information.
Indexes
nsVrOspfVirtNbrVRID nsVrOspfVirtNbrArea nsVrOspfVirtNbrRtrId
Column Syntax OID
nsVrOspfVirtNbrArea
The Transit Area Identifier.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.11.1.1
nsVrOspfVirtNbrRtrId
A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.11.1.2
nsVrOspfVirtNbrIpAddr
The IP address this Virtual Neighbor is us-
ing.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.11.1.3
nsVrOspfVirtNbrOptions
A Bit Mask corresponding to the neighbor's op-
tions field.

Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.11.1.4
nsVrOspfVirtNbrState
The state of the Virtual Neighbor Relation-
ship.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.3224.18.5.11.1.5
nsVrOspfVirtNbrEvents
The number of times this virtual link has
changed its state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.11.1.6
nsVrOspfVirtNbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.18.5.11.1.7
nsVrOspfVirtNbrHelloSuppressed
Indicates whether Hellos are being suppressed
to the neighbor
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3224.18.5.11.1.8
nsVrOspfVirtNbrVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.11.1.9

nsVrOspfExtLsdbTable

table
.1.3.6.1.4.1.3224.18.5.12 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's Links State Database.
nsVrOspfExtLsdbEntry entry .1.3.6.1.4.1.3224.18.5.12.1
A single Link State Advertisement.
Indexes
nsVrOspfExtLsdbVRID nsVrOspfExtLsdbType nsVrOspfExtLsdbLsid nsVrOspfExtLsdbRouterId
Column Syntax OID
nsVrOspfExtLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
5asExternalLink
 .1.3.6.1.4.1.3224.18.5.12.1.1
nsVrOspfExtLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.12.1.2
nsVrOspfExtLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.3224.18.5.12.1.3
nsVrOspfExtLsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.12.1.4
nsVrOspfExtLsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.12.1.5
nsVrOspfExtLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.18.5.12.1.6
nsVrOspfExtLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 36-36
 .1.3.6.1.4.1.3224.18.5.12.1.7
nsVrOspfExtLsdbVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.12.1.8

nsVrOspfAreaAggregateTable

table
.1.3.6.1.4.1.3224.18.5.14 · 1 row entry · 7 columns
Open in standard view 
A range of IP addresses  specified  by  an  IP
address/IP  network  mask  pair.   For example,
class B address range of X.X.X.X with a network
mask  of  255.255.0.0 includes all IP addresses
from X.X.0.0  to  X.X.255.255.   Note  that  if
ranges  are configured such that one range sub-
sumes  another  range  (e.g.,   10.0.0.0   mask
255.0.0.0  and  10.1.0.0 mask 255.255.0.0), the
most specific match is the preferred one.
nsVrOspfAreaAggregateEntry entry .1.3.6.1.4.1.3224.18.5.14.1
A range of IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.25…
Indexes
nsVrOspfAreaAggregateVRID nsVrOspfAreaAggregateAreaID nsVrOspfAreaAggregateLsdbType nsVrOspfAreaAggregateNet nsVrOspfAreaAggregateMask
Column Syntax OID
nsVrOspfAreaAggregateAreaID
The Area the Address Aggregate is to be found
within.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.3224.18.5.14.1.1
nsVrOspfAreaAggregateLsdbType
The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.
Enumeration
Enumerated Values:
3summaryLink
7nssaExternalLink
 .1.3.6.1.4.1.3224.18.5.14.1.2
nsVrOspfAreaAggregateNet
The IP Address of the Net or Subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.14.1.3
nsVrOspfAreaAggregateMask
The Subnet Mask that pertains to the Net or
Subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.18.5.14.1.4
nsVrOspfAreaAggregateStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3224.18.5.14.1.5
nsVrOspfAreaAggregateEffect
Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.
Enumerationr/w
Enumerated Values:
1advertiseMatching
2doNotAdvertiseMatching
 .1.3.6.1.4.1.3224.18.5.14.1.6
nsVrOspfAreaAggregateVRID
Virtual Router ID. VRID range for system created
VRs: [1-1024] and for user created VRs: [1025-2048]
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3224.18.5.14.1.7