nsVpnMonTunnelType

NETSCREEN-VPN-MON-MIB · .1.3.6.1.4.1.3224.4.1.1.1.6
MIB view Table view

Object

column Enumeration 
Protocol type used for the tunnel

Context

MIB
NETSCREEN-VPN-MON-MIB
OID
.1.3.6.1.4.1.3224.4.1.1.1.6
Type
column
Access
readonly
Status
current
Parent
nsVpnMonEntry
Table
nsVpnMonTable
Siblings
41

Syntax

Enumeration

Values & Constraints

Enumerated Values
0reserved
1proto-isakmp
2proto-ipsec-ah
3proto-ipsec-esp
4proto-ipcomp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nsVpnMonIndex
A unique value for each active VPN tunnel. Its value ranges between 1 and 65535 and may not be contiguous. Due to the dynamic nature of active VPN tunnels, the index has no oth…
columnInteger32.1.3.6.1.4.1.3224.4.1.1.1.1
nsVpnMonKeyType
a value which identifies a key exchange protocol to be used for the negotiation
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.10
nsVpnMonP1Auth
a value which identifies Phase 1 authentication method
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.11
nsVpnMonVpnType
The type of this VPN tunnel, either a dialup or site-to-site
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.12
nsVpnMonRmtGwIp
The peer Gateway's IP address
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.3224.4.1.1.1.13
nsVpnMonRmtGwId
The peer Gateway's ID
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3224.4.1.1.1.14
nsVpnMonMyGwIp
The local Gateway's IP address
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.3224.4.1.1.1.15
nsVpnMonMyGwId
The local Gateway's ID
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3224.4.1.1.1.16
nsVpnMonOutSpi
The SPI for outgoing packets
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.17
nsVpnMonInSpi
The SPI for incoming packets
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.18
nsVpnMonMonState
The monitoring status, if it is on, an icmp ping will be sent over the tunnel periodically to test the connectivity and latency
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.19
nsVpnMonInPlyId
The incoming policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.2
nsVpnMonTunnelState
The current tunnel status determined by the icmp ping if The monitoring status is on.
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.20
nsVpnMonP1State
The IKE's Phase 1 status
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.21
nsVpnMonP1LifeTime
an active Phase 1 sa's time left before re-key. -1 means unlimited lifetime.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.22
nsVpnMonP2State
The IKE's Phase 2 status
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.23
nsVpnMonP2LifeTime
an active Phase 2 sa's time left before re-key. -1 means unlimited life time.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.24
nsVpnMonP2LifeBytes
an active Phase 2 sa's bytes left before re-key. -1 means unlimited life bytes.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.25
nsVpnMonDelayAvg
a kind of rolling average of latency, in milliseconds. -1 has no meaning here, which means nsVpnMonDelayAvg has not been calculated yet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.26
nsVpnMonDelayLast
latency in last sample, in milliseconds. -1 means either vpn tunnel is inactive or vpn tunnel monitor is not turned on.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.27
nsVpnMonAvail
percentage over 30 samples
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.28
nsVpnMonSaId
SA identifier, also used as table index
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.29
nsVpnMonOutPlyId
The outgoing policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.3
nsVpnMonGroupId
Group Identifier
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.30
nsVpnMonUsrId
User Identifier
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.31
nsVpnMonStartSessRequestTime
Start Session request timestamp
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.3224.4.1.1.1.32
nsVpnMonStartSessEstTime
Start Session establish timestamp
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.3224.4.1.1.1.33
nsVpnMonEndSessTime
End Session timestamp [when session terminates]
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.3224.4.1.1.1.34
nsVpnMonBytesIn
Incoming bytes through this sa.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3224.4.1.1.1.35
nsVpnMonBytesOut
Outgoing bytes through this sa.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3224.4.1.1.1.36
nsVpnMonPacketsIn
Incoming packets through this sa.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3224.4.1.1.1.37
nsVpnMonPacketsOut
Outgoing packets through this sa.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3224.4.1.1.1.38
nsVpnMonIfIndex
interface index.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3224.4.1.1.1.39
nsVpnMonVpnName
A textual string contains information about the VPN entity from which this tunnel was derived.
columnOctetString.1.3.6.1.4.1.3224.4.1.1.1.4
nsVpnMonUpdateTime
Timestamp [Whenever any member of the row gets updated, the timestamp is updated]
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.3224.4.1.1.1.40
nsVpnMonDN
DN name
columnOctetString.1.3.6.1.4.1.3224.4.1.1.1.41
nsVpnMonIfInfo
Internal id assigned to this interface. Stays persistent across resets.
columnInteger32.1.3.6.1.4.1.3224.4.1.1.1.42
nsVpnMonVsysName
A textual string contains the Virtual system to which this tunnel belongs.
columnOctetString.1.3.6.1.4.1.3224.4.1.1.1.5
nsVpnMonEspEncAlg
a value which identifies a particular algorithm to be used to provide secrecy protection for ESP.
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.7
nsVpnMonEspAuthAlg
The ESP Authentication Algorithm used in the IPsec.
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.8
nsVpnMonAhAlg
a value which identifies a particular algorithm to be used to provide integrity protection for AH.
columnEnumeration.1.3.6.1.4.1.3224.4.1.1.1.9