NETSCREEN-VPN-MON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
42

nsVpnMonTable

table
.1.3.6.1.4.1.3224.4.1.1 · 1 row entry · 42 columns
Open in standard view
Uses the netscreen variant from /opt/observium/mibs/netscreen.
Command help
Walk nsVpnMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETSCREEN-VPN-MON-MIB' -M '/opt/observium/mibs/netscreen:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETSCREEN-VPN-MON-MIB::nsVpnMonTable' 
A list of active VPN tunnel entries.
nsVpnMonEntry row .1.3.6.1.4.1.3224.4.1.1.1
A VPN tunnel entry containing attributes for both IKE Phase 1
and Phase 2 as well as associated policy
Indexes
Column Syntax OID
nsVpnMonIndex
A unique value for each active VPN tunnel. Its value ranges
between 1 and 65535 and may not be contiguous. Due to the
dynamic nature of active VPN tunnels, the index has no other
meaning but a pure index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.1
nsVpnMonInPlyId
The incoming policy ID for which this tunnel is created for.
-1 means no policy associates with this SA.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.2
nsVpnMonOutPlyId
The outgoing policy ID for which this tunnel is created for.
-1 means no policy associates with this SA.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.3
nsVpnMonVpnName
A textual string contains information about the VPN entity
from which this tunnel was derived.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3224.4.1.1.1.4
nsVpnMonVsysName
A textual string contains the Virtual system to which this
tunnel belongs.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3224.4.1.1.1.5
nsVpnMonTunnelType
Protocol type used for the tunnel
Enumeration
Enumerated Values:
0reserved
1proto-isakmp
2proto-ipsec-ah
3proto-ipsec-esp
4proto-ipcomp
 .1.3.6.1.4.1.3224.4.1.1.1.6
nsVpnMonEspEncAlg
a value which identifies a particular algorithm to be used to
provide secrecy protection for ESP.
Enumeration
Enumerated Values:
0reserved
1esp-des-iv64
2esp-des
3esp-3des
4esp-rc5
5esp-idea
6esp-cast
7esp-blowfish
8esp-3idea
9esp-des-iv32
10esp-rc4
11esp-null
12esp-aes
20esp-aes192
21esp-aes256
 .1.3.6.1.4.1.3224.4.1.1.1.7
nsVpnMonEspAuthAlg
The ESP Authentication Algorithm used in the IPsec.
Enumeration
Enumerated Values:
0reserved
1hmac-md5
2hmac-sha
3des-mac
4ipdk
 .1.3.6.1.4.1.3224.4.1.1.1.8
nsVpnMonAhAlg
a value which identifies a particular algorithm to be used to
provide integrity protection for AH.
Enumeration
Enumerated Values:
0reserved
2ah-md5
3ah-sha
4ah-des
 .1.3.6.1.4.1.3224.4.1.1.1.9
nsVpnMonKeyType
a value which identifies a key exchange protocol to be used
for the negotiation
Enumeration
Enumerated Values:
0manual
1auto-ike
 .1.3.6.1.4.1.3224.4.1.1.1.10
nsVpnMonP1Auth
a value which identifies Phase 1 authentication method
Enumeration
Enumerated Values:
0unused
1preshared-key
2dss-Signature
3rsa-Signature
4rsa-Encryption1
5rsa-Encryption2
 .1.3.6.1.4.1.3224.4.1.1.1.11
nsVpnMonVpnType
The type of this VPN tunnel, either a dialup or site-to-site
Enumeration
Enumerated Values:
0reserved
1dialup
2site-to-site
 .1.3.6.1.4.1.3224.4.1.1.1.12
nsVpnMonRmtGwIp
The peer Gateway's IP address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.4.1.1.1.13
nsVpnMonRmtGwId
The peer Gateway's ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3224.4.1.1.1.14
nsVpnMonMyGwIp
The local Gateway's IP address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.4.1.1.1.15
nsVpnMonMyGwId
The local Gateway's ID
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3224.4.1.1.1.16
nsVpnMonOutSpi
The SPI for outgoing packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.17
nsVpnMonInSpi
The SPI for incoming packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.18
nsVpnMonMonState
The monitoring status, if it is on, an icmp ping will be sent
over the tunnel periodically to test the connectivity and
latency
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3224.4.1.1.1.19
nsVpnMonTunnelState
The current tunnel status determined by the icmp ping if The
monitoring status is on.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3224.4.1.1.1.20
nsVpnMonP1State
The IKE's Phase 1 status
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.3224.4.1.1.1.21
nsVpnMonP1LifeTime
an active Phase 1 sa's time left before re-key. -1 means
unlimited lifetime.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.22
nsVpnMonP2State
The IKE's Phase 2 status
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.3224.4.1.1.1.23
nsVpnMonP2LifeTime
an active Phase 2 sa's time left before re-key. -1 means
unlimited life time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.24
nsVpnMonP2LifeBytes
an active Phase 2 sa's bytes left before re-key. -1 means
unlimited life bytes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.25
nsVpnMonDelayAvg
a kind of rolling average of latency, in milliseconds. -1 has
no meaning here, which means nsVpnMonDelayAvg has not been
calculated yet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.26
nsVpnMonDelayLast
latency in last sample, in milliseconds.
-1 means either vpn tunnel is inactive or vpn tunnel monitor is
not turned on.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.27
nsVpnMonAvail
percentage over 30 samples
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.28
nsVpnMonSaId
SA identifier, also used as table index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.29
nsVpnMonGroupId
Group Identifier
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.30
nsVpnMonUsrId
User Identifier
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.31
nsVpnMonStartSessRequestTime
Start Session request timestamp
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.32
nsVpnMonStartSessEstTime
Start Session establish timestamp
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.33
nsVpnMonEndSessTime
End Session timestamp [when session terminates]
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.34
nsVpnMonBytesIn
Incoming bytes through this sa.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.35
nsVpnMonBytesOut
Outgoing bytes through this sa.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.36
nsVpnMonPacketsIn
Incoming packets through this sa.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.37
nsVpnMonPacketsOut
Outgoing packets through this sa.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.38
nsVpnMonIfIndex
interface index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.39
nsVpnMonUpdateTime
Timestamp [Whenever any member of the row gets updated, the
timestamp is updated]
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3224.4.1.1.1.40
nsVpnMonDN
DN name
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.3224.4.1.1.1.41
nsVpnMonIfInfo
Internal id assigned to this interface. Stays persistent across resets.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.4.1.1.1.42